Concept
Prospective cohort study
Related people (15)
Kamiar Aminian
Kamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science.
Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices.
Full CV
ORCID
Vincent Kaufmann
Vincent Kaufmann is associate professor of urban sociology and mobility at Ecole Polytechnique Fédérale de Lausanne (EPFL). Since 2011, he is also scientific director of the Mobile Lives Forum in Paris. After a master degree in sociology (Universtiy of Geneva) he did his Ph.D. at EPFL on rationalities underlying transport modal practices. Vincent Kaufmann has been invited lecturer at Lancaster University (2000-2001), Ecole des Ponts et Chaussées, Paris (2001-2002), Laval University, Québec (2008) Nimegen University (2010), Université de Toulouse Le Mirail (2011), Université Catholique de Louvain (2004-2018) and Tongji University in Shanghai (2018). There fields of research are: motility, mobility and urban life styles, links between social and spatial mobility, public policies of land planning and transportation. He recently published “Mobilité et libre circulation en Europe” (with Ander Audikana) Economica (2017).
François Maréchal
Ph D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Ursula Röthlisberger
U. Röthlisberger was born in Solothurn (Switzerland). In 1988 she made her diploma in Physical Chemistry in the group of Prof. Ernst Schumacher at the University of Berne (Switzerland). Her Ph.D. thesis was done in collaboration with Dr. Wanda Andreoni at the IBM Zurich Research Laboratory in Rüschlikon. After finishing her Ph.D in 1991 she spent some time as a postdoctoral research assistant at the IBM Research Lab. From 1992-1995 she was a postdoctoral research assistant in the group of Prof. Michael L. Klein at the University of Pennsylvania in Philadelphia (USA). In 1994 she was awarded an advanced researcher fellowship (Profil 2) from the Swiss National Science Foundation. Before starting her Profile 2-fellowship she spent another year as postdoctoral research assistant in the group of Prof. Michele Parrinello at the Max-Planck-Institute for Solid State Physics in Stuttgart, Germany. In 1996 she moved as Profile 2-fellow to the ETH in Zurich, hosted by the group of Prof. Wilfred F. van Gunsteren. In 1997 she became Assistant Professor of Computer-Aided Inorganic Chemistry at the ETH Zurich.