Publications related to Fiberglass spray lay-up process

Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior

Small scale (1:30-1:40) Reinforced Concrete is useful for centrifuge testing. However, manufacturing the reinforcing cages by hand at this scale is practically difficult. This paper suggests that small scale reinforcement can be manufactured using a metal ...

Elsevier Sci Ltd2024

A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion

Véronique Michaud, Vincent Werlen, Christian Rytka

A new model is proposed for the consolidation of hybrid textiles, in which air entrapment and dissolution are considered. One of the key parameters is tow permeability, which is described by the analytical model of Gebart and validated at very high fibre v ...

ELSEVIER SCI LTD2023

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Véronique Michaud, Baris Çaglar, Lode Geeraard Daelemans

The through-thickness compressive behavior of fabric reinforcements is crucial in liquid composite molding manufacturing processes. Predictive simulations of the compressive response are thus necessary to enable a virtual processing workflow. These are com ...

2021

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Véronique Michaud, Damiano Salvatori, Baris Çaglar, Amaël Maximilien Cohades

The out-of-plane permeability of two glass fibre fabrics was measured by 26 institutions using silicone oil as a test fluid. Participants in this study were free to select the test procedure, specimen dimensions and data analysis method, provided that test ...

2021

Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints

Thomas Keller, Lulu Liu, Xin Wang

In view of the low structural efficiency of bolted joints in pultruded fiber-reinforced polymer (FRP) profiles with mainly unidirectional (UD) fiber architecture, off-axis plies were considered as an effective way to improve bolted joint performance. An ex ...

ELSEVIER SCI LTD2020

Assessment of capillary phenomena in liquid composite molding

Véronique Michaud, Baris Çaglar, Feyza Karasu Kiliç, Cem Tekin

The interplay between capillary and viscous forces plays a significant role for optimal part quality in fiber-reinforced composites manufactured by Liquid Composite Molding (LCM); these are however difficult to analyze during flow. Two approaches are propo ...

2019

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Yann Albert Gérard Lebaupin

In this paper, the low-energy impact behavior of a fully biobased composite made of bio-sourced polyamide 11 resin reinforced with flax fibers was investigated. Different composite laminates were studied in order to determine the stacking sequence effects ...

SAGE PUBLICATIONS LTD2019

Numerically-based method for fracture characterization of Mode I-dominated two-dimensional delamination in FRP laminates

Thomas Keller, Anastasios Vassilopoulos, Aida Cameselle Molares

A new numerically-based method suitable for determining the total strain energy release rate (SERA) involved in two-dimensional (2D) Mode I-dominated delamination under opening loads in FRP laminates is presented. The method is based on the mutual dependen ...

ELSEVIER SCI LTD2019

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Fiberglass spray lay-up process

Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior

A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints

Assessment of capillary phenomena in liquid composite molding

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite

Numerically-based method for fracture characterization of Mode I-dominated two-dimensional delamination in FRP laminates

Graph Chatbot

Chat with Graph Search

Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints

Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior

Kinematic and mechanical response of dry woven fabrics in through-thickness compression: Virtual fiber modeling with mesh overlay technique and experimental validation

Strategies for energy-efficient frontal polymerisation processing and microstructural evaluation of fibre reinforced composites

A model for the consolidation of hybrid textiles considering air entrapment, dissolution and diffusion

Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

Numerically-based method for fracture characterization of Mode I-dominated two-dimensional delamination in FRP laminates

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Assessment of capillary phenomena in liquid composite molding

Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite