Thomas LieblingThomas M. Liebling (http://roso.epfl.ch) is Mathematics Professor Emeritus at EPFL (Lausanne), where he taught from 1980 to 2008 and directed the OR group ROSO.
He served on the jury of 112 PhD and habilitation theses, 39 as director. He further supervised 150 MS theses and 350 term projects, many of which in collaboration with industry and private and public services. He published over 200 refereed papers, books, and book chapters.
Previous appointments were with ETHZ, and RPI; as visiting professor with Cornell, ELTE-Budapest, MIT, PUC-Rio, and Stanford.
He received his education from ETH Zurich:
MS in EE (1966, automatic control),
PhD in operations research (1969; awarded the ETH prize and medal).
Mathematics habilitation (1973) with a pioneering probabilistic study on the number of iterations of the simplex method.
Postdoctoral fellowship (1970/71) Stanford University with G.B. Dantzig
He holds the Science Prize of the German OR Society, is a member of the Swiss Academy of Engineering Sciences and the Scientific Council of ZIB, Berlin.
He received a honorary degree from the Universidad Nacional Mayor de San Marcos, Lima and the Medal of Merit from EPN Escuela Politécnica Nacional, Quito.
Editorial activities: DE (Optimization and Networks) of Management Science, AE of Operations Research, OR-letters, OR-Spectrum, EJOR, Discrete Applied Optimization, and Math. Programming, recurring guest-editor of MPB and DAM.
He is Editor in Chief of the MOS-SIAM book series on optimization.
He is a founding organizer of the Aussois Workshops in Combinatorial Optimization, and member of the steering committee of LAGOS (Latin American Graphs, Optimizstion Symposium) chaired the MPS Publications Committee, Tucker Prize Committee, and presently chairs its Symposium Advisory Committee. He organized ISMP 1997 at EPFL, with nearly 1500 participants from 63 countries, the largest to date. He has chaired the Conference of Department Chairmen (a position comparable to a provost), the Computer Commission (responsible for the introduction at EPFL of the first Swiss supercomputer), and further chaired the Research Commission over 6 years, he created the Doctoral Award and was its first Jury chair. He belonged to the Board of Trustees of the Swiss National Science Foundation .
Much of his research lies at the interface with other disciplines (physics, life sciences, materials science, management, engineering, logistics), focusing on complex systems modeling, simulation, and optimization.
His present research interests are in algorithmic game theory and complex particle system modeling and simulation using paradigms from mathematical programming, discrete geometry and probability. Paul XirouchakisPaul Xirouchakis obtained his diplôme in mechanical and electrical engineering at the National Technical University of Athens, Greece in 1971. He continued his education at the Ecole Nationale Superieure de Techniques Avancées, in Paris, France where he obtained his diplôme dIngénieur de lE.N.S.T.A. et dIngénieur civil du Génie Maritime in 1973. He obtained his PhD degree in Structural Mechanics from the Massachusetts Institute of Technology in 1978. He was appointed thereafter assistant and later associate professor at Massachusetts Institute of Technology (1978-1985). Subsequently he was nominated associate professor at the National Technical University in Athens (1985-1987). After about eight years working in the industry with JJMA, Arlington, Virginia (in parallel he also obtained a PhD degree in Information Technology, in 1992 from George Mason University) he was nominated at EPFL professor of computer-aided design and manufacturing since July 1995. At EPFL he teaches design for X at the bachelors level, computer-aided manufacturing and multi-body dynamics simulation at the masters level and manufacturing information systems at the doctoral level. His research covers the development of methods and computer tools for the (sustainable) product design and manufacturing. Current research projects deal with the development of method and tools for resource efficient part manufacturing, chatter-free part programming, development of a virtual multi-body dynamics machine tool environment and composites drilling programming.
John Richard ThomeJohn R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
Pascal FuaPascal Fua received an engineering degree from Ecole Polytechnique, Paris, in 1984 and the Ph.D. degree in Computer Science from the University of Orsay in 1989. He then worked at SRI International and INRIA Sophia-Antipolis as a Computer Scientist. He joined EPFL in 1996 where he is now a Professor in the School of Computer and Communication Science and heads the Computer Vision Laboratory. His research interests include shape modeling and motion recovery from images, analysis of microscopy images, and Augmented Reality. His research interests include shape modeling and motion recovery from images, analysis of microscopy images, and machine learning. He has (co)authored over 300 publications in refereed journals and conferences. He is an IEEE Fellow and has been an Associate Editor of IEEE journal Transactions for Pattern Analysis and Machine Intelligence. He often serves as program committee member, area chair, and program chair of major vision conferences and has cofounded three spinoff companies (Pix4D, PlayfulVision, and NeuralConcept).
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Jan Sickmann HesthavenProf. Hesthaven received an M.Sc. in computational physics from the Technical University of Denmark (DTU) in August 1991. During the studies, the last 6 months of 1989 was spend at JET, the european fusion laboratory in Culham, UK. Following graduation, he was awarded a 3 year fellowship to begin work towards a Ph.D. at Riso National Laboratory in the Department of Optics and Fluid Dynamics. During the 3 years of study, the academic year of 1993-1994 was spend in the Division of Applied Mathematics at Brown University and three 3 months during the summer of 1994 in Department of Mathematics and Statistics at University of New Mexico. In August 1995, he recieved a Ph.D. in Numerical Analysis from the Institute of Mathematical Modelling (DTU). Following graduation in August 1995, he was awarded an NSF Postdoctoral Fellowship in Advanced Scientific Computing and was approinted Visiting Assistant Professor in the Division of Applied Mathematics at Brown University. In December of 1996, he was appointed consultant to the Institute of Computer Applications in Science and Engineering(ICASE) at NASA Langley Research Center (NASA LaRC). As of July 1999, he was appointed Assistant Professor of Applied Mathematics, in September 2000 he was awarded an Alfred P. Sloan Fellowship, as of July 2001 he was awarded a Manning Assistant Professorship, and in March 2002, he was awarded an NSF Career Award. In January 2003, he was promoted to Associate Professor of Applied Mathematics with tenure and in May 2004 he was awarded Philip J. Bray Award for Excellence in Teaching in the Sciences (the highest award given for teaching excellence in all sciences at Brown University). He was promoted to Professor of Applied Mathematics as of July 2005. From October 2006 to June 2013, he was the Founding Director of the Center for Computation and Visualization (CCV) at Brown University. As of October 2007, he holds the (honorary) title of Professor (Adjunct) at the Technical University of Denmark. In November 2009, he successfully defended his dr.techn thesis at the Technical University of Denmark and was rewarded the degree of Doctor Technices -- the highest academic distinction awarded based on ... substantial and lasting contributions that has helped to move the research area forward and penetrated into applications. As grant Co-PI he served from Aug 2010 to June 2013 as Deputy Director of the Institute of Computational and Experimental Research in Mathematics (ICERM), the newest NSF Mathematical Sciences Research Institute. After having spend his entire academic career at Brown University, Prof Hesthaven decided to pursue new challenges and joined the Mathematics Institute of Computational Science and Engineering (MATHICSE) at Ecole Polytechnique Fédérale de Lausanne (EPFL) in Switzerland in July 2013. In March 2014 he was elected SIAM Fellow for contributions to high-order methods for partial differential equations.
