Concept

Quick clay

Related publications (47)

Unsupervised Electrofacies Clustering Based on Parameterization of Petrophysical Properties: A Dynamic Programming Approach

Electrofacies using well logs play a vital role in reservoir characterization. Often, they are sorted into clusters according to the self-similarity of input logs and do not capture the known underlying physical process. In this paper, we propose an unsupe ...

SOC PETROPHYSICISTS & WELL LOG ANALYSTS-SPWLA2023

Freezing-induced stiffness and strength anisotropy in freezing clayey soil: Theory, numerical modeling, and experimental validation

Gioacchino Viggiani

This paper presents a combined experimental-modeling effort to interpret the coupled thermo-hydro-mechanical behaviors of the freezing soil, where an unconfined, fully saturated clay is frozen due to a temperature gradient. By leveraging the rich experimen ...

WILEY2022

Clay calcination technology: state-of-the-art review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Alastair Thomas Matthew Marsh, Mohsen Ben Haha, François Henri Avet, Shashank Bishnoi, Adrian Alujas Diaz, Anuj Parashar

The use of calcined clays as supplementary cementitious materials provides the opportunity to significantly reduce the cement industry's carbon burden; however, use at a global scale requires a deep understanding of the extraction and processing of the cla ...

SPRINGER2022

Oxidation of pyrite (FeS2) and troilite (FeS) impurities in kaolinitic clays after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva

Valorisation of locally available clays for producing blended cements is crucial for a widespread adoption of sustainable binders incorporating these materials. In some places, clays can be intermixed with small amounts of iron sulfides, which could eventu ...

SPRINGER2022

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

Karen Scrivener, Diana Londoño Zuluaga

The objective of this study is to analyse the mechanical and durability properties of a high-performance mortars based on low grade kaolin clay and the effect of electrical conductivity and pore microstructure on the chloride penetration resistance. A tota ...

ELSEVIER2022

Hydration and mixture design of calcined clay blended cements: review by the RILEM TC 282-CCL

Karen Scrivener, Franco Alberto Zunino Sommariva, Mohsen Ben Haha, François Henri Avet, Anuj Parashar, Yuvaraj Dhandapani, Sreejith Krishnan

The RILEM technical committee 282-CCL: Calcined Clays as Supplementary Cementitious Materials, investigates all the aspects related to calcined clays, from clay exploration and characterization to calcination process, hydration reactions and concrete prope ...

SPRINGER2022

Effect of the mineralogical composition on the elastoplastic hydromechanical response of Opalinus Clay shale

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Opalinus Clay is the shale currently under investigation as the host formation for geological radioactive waste disposal in Switzerland. Its hydromechanical response has been widely studied, and the experimental results show a range of values whose dispers ...

2021

Water retention behaviour of compacted and reconstituted scaly clays

Alessio Ferrari

The paper presents the results of an experimental research devoted to investigate the response to suction variations of a scaly clay in compacted and reconstituted conditions. Different experimental techniques (axis translation, vapour equilibrium, dew poi ...

E D P SCIENCES2020

Limestone calcined clay cements (LC3): raw material processing, sulfate balance and hydration kinetics

Franco Alberto Zunino Sommariva

Limestone calcined clay cements (LC3) are blended cements that combine clinker, limestone, calcined clay and gypsum. The availability of the materials required to produce LC3 and the good performance that it achieves, makes LC3 suitable as a sustainable re ...

EPFL2020

Assessing the effect of alkanolamine grinding aids in limestone calcined clay cements hydration

Karen Scrivener, Franco Alberto Zunino Sommariva

Grinding aids are commonly used in cement manufacture to reduce electrostatic forces between powder particles and reduce agglomeration. Alkanolamines are known to also influence the hydration of the aluminate phases in cement. This study assessed the effec ...

2020

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.