Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Reinforced concrete coupled walls are a common lateral load resisting system used in multi-storey buildings. The effect of the coupling beams can improve seismic performance, but at the same time adds complexity to the design procedure. A case study couple ...
Recent earthquakes around the world have demonstrated that steel moment-frame buildings designed based on older seismic provisions are seismically deficient. To enhance the seismic performance of these buildings, a new seismic retrofit system has been deve ...
Reinforced concrete (RC) structures with tri-dimensional asymmetries tend to exhibit torsional effects that are of great concern in the field of earthquake engineering, in particular at large ductility levels where they become more relevant [MAN09]. In nuc ...
This paper proposes a computational approach for the collapse assessment of concentrically braced frames (CBFs) subjected to earthquakes. Empirical formulations for modeling the postbuckling behavior and fracture of three main steel brace shapes that are c ...
The 2010-2011 Canterbury earthquakes in New Zealand revealed (1) improved structural response resulting from historical design advancements, (2) poor structural performance due to previously identified shortcomings that had been insufficiently addressed in ...
Unreinforced masonry (URM) structures are known to be rather vulnerable to seismic loading. Modern URM buildings with reinforced concrete (RC) slabs might, however, have an acceptable seismic performance for regions of low to moderate seismicity. In partic ...
In several countries of moderated seismicity, with the re-evaluation of the seismic hazard most unreinforced masonry (URM) buildings with reinforced concrete slabs failed to satisfy the seismic design check. A possible seismically retrofit solution consist ...
The reliable estimation of the seismic performance of structures requires quantifying the aleatory and epistemic uncertainties of the system parameters. This is efficiently achieved for a case study of a four-story steel moment-resisting frame through seve ...
The severe damage and collapse of many reinforced concrete (RC) wall buildings in the recent earthquakes of Chile (2010) and New Zealand (2011) have shown that RC walls did not perform as well as expected based on the design calculations required by the mo ...
The seismic behaviour of reinforced concrete framed structures involves a number of nonlinear material and geometrical phenomena that are impossible to model exhaustively in a single model. Furthermore, past studies showed that the most correct modelling o ...