Publications related to Corrosion engineering

Flow microcapillary plasma mass spectrometry-based investigation of new Al–Cr–Fe complex metallic alloy passivation

Christian Ludwig, Noémie Elise Ott, Andrea Ulrich

Al-Cr-Fe complex metallic alloys are new intermetallic phases with low surface energy, low friction, and high corrosion resistance down to very low pH values (0-2). Flow microcapillary plasma mass spectrometry under potentiostatic control was used to chara ...

Elsevier2014

Study of perfomance reference compounds for the estimation of levels of emerging polar contaminants in water

Luiz Felippe De Alencastro, Nicolas Estoppey, Adrien Schopfer, Maria Inmaculada Carpinteiro Botana

The determination of polar organic contaminants (pesticides, pharmaceuticals and inhibitors of corrosion) in river water was carried out using POCIS as a passive sampling technique and UPLC-MS/MS as a determination technique. Several compounds with propert ...

2014

Spatial extent and ecotoxicological risk assessment of a micropollutant-contaminated wastewater plume in Lake Geneva

Tamar Kohn, Jeremy Samuel Arey, Florence Bonvin, Yosef Akhtman, Rebecca Rutler, Auréline Grange, Lorenzo Martelletti

In this study, the spatial extent of a wastewater-influenced water mass originating from a wastewater treatment plant outlet in Vidy Bay (Lake Geneva) was monitored by two manned submersibles from June to August 2011. The main goal was to assess whether mi ...

Springer Verlag2014

Sputtered titanium oxynitride coatings for endosseous applications: Physical and chemical evaluation and first bioactivity assays

Rosendo Sanjines, Alessandro Pontearso

Titanium oxynitride coatings (TiNxO3,) are considered a promising material for applications in dental implantology due to their high corrosion resistance, their biocompatibility and their superior hardness. Using the sputtering technique, TiNxO3, films wit ...

Elsevier Science Bv2014

Three-dimensional polymeric microtiles for optically-tracked fluidic self-assembly

Jürgen Brugger, Alcherio Martinoli, Massimo Mastrangeli

Self-assembly (SA) is a bio-inspired key coordination mechanism for swarms of intelligent agents as well as a pervasive bottom-up methodology for the fabrication of heterogeneous micro- and nanosystems. Analytical studies of SA at small scales are therefor ...

Elsevier2014

Stress-corrosion failure mechanisms in soda-lime silica glass

Pieter Christian Louter, Maria Lindqvist, Costanza Ronchetti

The present work focuses on stress-corrosion mechanisms in soda-lime silica glass. Four-point beam-bending tests were performed on small specimens, measuring failure time in function of temperature and relative humidity. By using linear elastic fracture me ...

Elsevier2013

Local, element-specific and time-resolved dissolution processes on a Mg–Y–RE alloy – Influence of inorganic species and buffering systems

Christian Ludwig, Noémie Elise Ott, Andrea Ulrich

The effect of body fluids inorganic species on element-specific dissolution of a Mg-Y-Rare earth elements (RE) alloy was investigated by flow microcapillary plasma mass spectrometry. A new important aspect of this method is the online monitoring of precipi ...

2013

Energy-Efficient Sol-Gel Process for Production of Nanocomposite Absorber Coatings for Tubular Solar Thermal Collectors

Andreas Schueler, Martin Python, Martin Joly, Yannik Antonetti, Thomas Gascou, Marina Garcia Gonzalez

The energy efficiency of production processes for components of solar energy systems is an important issue. Other factors which are important for the production of products such as black selective solar coatings include production speed, cycle time and hom ...

EPFL Solar Energy and Building Physics Laboratory (LESO-PB)2013

Mechanical and chemical mechanisms in the tribocorrosion of a Stellite type alloy

Marco Cantoni, Stefano Mischler

The tribocorrosion of a Stellite 21 type alloy sliding against alumina in sulfuric acid was investigated in order to identify relevant degradation mechanisms. Tribocorrosion tests were performed using a reciprocating motion pin-on-plate system operating un ...

Elsevier Science Sa2013

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Corrosion engineering

Flow microcapillary plasma mass spectrometry-based investigation of new Al–Cr–Fe complex metallic alloy passivation

Study of perfomance reference compounds for the estimation of levels of emerging polar contaminants in water

Spatial extent and ecotoxicological risk assessment of a micropollutant-contaminated wastewater plume in Lake Geneva

Sputtered titanium oxynitride coatings for endosseous applications: Physical and chemical evaluation and first bioactivity assays

Three-dimensional polymeric microtiles for optically-tracked fluidic self-assembly

Stress-corrosion failure mechanisms in soda-lime silica glass

Local, element-specific and time-resolved dissolution processes on a Mg–Y–RE alloy – Influence of inorganic species and buffering systems

Energy-Efficient Sol-Gel Process for Production of Nanocomposite Absorber Coatings for Tubular Solar Thermal Collectors

Tribocorrosion of Pulsed Plasma-Nitrided CoCrMo Implant Alloy

Mechanical and chemical mechanisms in the tribocorrosion of a Stellite type alloy

Graph Chatbot

Chat with Graph Search

Flow microcapillary plasma mass spectrometry-based investigation of new Al–Cr–Fe complex metallic alloy passivation

Spatial extent and ecotoxicological risk assessment of a micropollutant-contaminated wastewater plume in Lake Geneva

Sputtered titanium oxynitride coatings for endosseous applications: Physical and chemical evaluation and first bioactivity assays

Three-dimensional polymeric microtiles for optically-tracked fluidic self-assembly

Stress-corrosion failure mechanisms in soda-lime silica glass

Local, element-specific and time-resolved dissolution processes on a Mg–Y–RE alloy – Influence of inorganic species and buffering systems

Energy-Efficient Sol-Gel Process for Production of Nanocomposite Absorber Coatings for Tubular Solar Thermal Collectors

Mechanical and chemical mechanisms in the tribocorrosion of a Stellite type alloy

Tribocorrosion of Pulsed Plasma-Nitrided CoCrMo Implant Alloy

Study of perfomance reference compounds for the estimation of levels of emerging polar contaminants in water