Concept

Steelmaking

Related publications (32)

Micromechanics of oxide inclusions in ferrous alloys

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution With Magnetite in Hydrochloric Acid Solution

The high zinc and iron contents of electric arc furnace (EAF) dust in the forms of zinc ferrite (ZnFe2O4) and magnetite (Fe3O4) make it a valuable secondary source of these metals. ZnFe2O4 and Fe3O4 are known to form a solid solution at all compositions, a ...

SPRINGER2023

A life cycle analysis of novel lightweight composite processes: Reducing the environmental footprint of automotive structures

Véronique Michaud, Baris Çaglar, Vincent Werlen, Christian Rytka, Colin Gomez

In this study, three novel thermoplastic impregnation processes were analyzed towards automotive applications. The first process is thermoplastic compression resin transfer molding in which a glass fiber mat is impregnated in through thickness by a thermop ...

ELSEVIER SCI LTD2022

Structure, Oxygen Content and Electric Properties of Titanium Nitride Electrodes in TiNx/La:HfO2/TiNx Stacks Grown by PEALD on SiO2/Si

Philippe Buffat, Elena Suvorova Buffat

This work reports experimental results of the quantitative determination of oxygen and band gap measurement in the TiNx electrodes in planar TiNx top/La:HfO2/TiNx bottom MIM stacks obtained by plasma enhanced atomic layer deposition on SiO2. Methodological ...

2022

Advancing industrial decarbonization by assessing the future use of renewable energies in industrial processes (AID-RES) - Decarbonizing alternatives for the European Steel Industry

The Iron and Steel Industry is one of the most carbon-intensive in the European Union, and to meet the climate agreement objectives for 2050, it must dramatically reduce its environmental footprint. The present study analyzes the potential for CO2 emission ...

2021

The effect of alkali hydroxides and equilibration time on Al uptake by calcium silicate hydrates (C-S-H)

Sonya Barzgar

Cement production accounts for approximately 8% of man-made CO2 emissions. Lowering these CO2 emissions is currently one of the most important and urgent research topics within the cement community. To reduce these emissions, the Portland cement (PC) is pa ...

EPFL2021

Optimum design of low environmental impact structures through component reuse

Jan Friedrich Georg Brütting

Load-bearing systems (structures) in buildings and infrastructure contribute to a significant share of adverse environmental impacts (EI) because of resource- and energy-intensive fabrication. A currently overlooked circular economy strategy to reduce EI i ...

EPFL2020

Environmental degradation of fracture resistance in high-temperature water environments of low-alloy reactor pressure vessel steels with high sulphur or phosphorus contents

Philippe Spätig, Hans-Peter Seifert, Zaiqing Que

The fracture behaviour of low-alloy reactor pressure vessel steels with various sulphur and phosphorus contents, different environmentally-assisted cracking (EAC) and temper embrittlement (TE) susceptibilities was evaluated by elastic plastic fracture mech ...

2019

Capacity design principles for the ductile behaviour of conventional and high-performance steel structures under earthquake shaking

Dimitrios Lignos

Steel lateral load-resisting systems offer a variety of design solutions to ensure a ductile behaviour of a structure during a seismic event, thereby achieving a relatively low earthquake-induced collapse risk, if designed and detailed properly according t ...

Centre suisse de la construction métallique (SZS)2019

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Olivier Sauter, Ambrogio Fasoli, Basil Duval, Stefano Coda, Jonathan Graves, Yves Martin, Duccio Testa, Patrick Blanchard, Alessandro Pau, Cristian Sommariva, Henri Weisen, Richard Pitts, Yann Camenen, Jan Horacek, Javier García Hernández, Marco Wischmeier, Nicola Vianello, Mikhail Maslov, Federico Nespoli, Yao Zhou, David Pfefferlé, Davide Galassi, Antonio José Pereira de Figueiredo, Jonathan Marc Philippe Faustin, Liang Yao, Dalziel Joseph Wilson, Hamish William Patten, Samuel Lanthaler, Bernhard Sieglin, Otto Asunta

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscop ...

ELSEVIER2019

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.