Publications related to Coating

Embedded microstructures for daylighting and seasonal thermal control

Jean-Louis Scartezzini, Yves Leterrier, Andreas Schueler, André Gabriel Kostro, Mario Geiger, Nicolas Jolissaint

A novel concept for an advanced fenestration system was studied and samples were produced to demonstrate the feasibility. The resulting novel glazing will combine the functions of daylighting, glare protection, and seasonal thermal control. Coated microstr ...

Spie-Int Soc Optical Engineering2012

ELECTROMAGNETIC CHARACTERIZATION OF MATERIALS FOR THE CLIC DAMPING RINGS

Carlo Zannini, Giovanni De Michele, Eirini Koukovini Platia, Giovanni Rumolo

The performance of the Compact LinearCollider (CLIC) damping rings (DR) is likely to be limited by collective effects due to the unprecedented brilliance of the beams. Coating will be used in both electron (EDR) and positron damping rings (PDR) to suppress ...

www.jacow.org2012

Edge-strengthening of structural glass with protective coatings

Jean-Paul Lebet, Pieter Christian Louter, Maria Lindqvist

In modern buildings, glass is increasingly used as a load-carrying material in structural components, such as glass beams. For glass beams especially the edge strength of glass is important. However, the strength of glass is not a material constant but dep ...

Trans Tech Publications Ltd2012

Voltammetric Detection of Hg2+ Using Peptide-Functionalized Polymer Brushes

Harm-Anton Klok, Maarten Danial

Polymer brushes grafted by surface-initiated atom transfer radical polymerization (SI-ATRP) from the surface of Ir-based microelectrode arrays are explored as a platform for the fabrication of sensory coatings for the voltammetric detection of Hg2+. The po ...

Csiro Publishing2012

Dewetting-driven hierarchical self-assembly of small semiconducting molecules

Roland Hany, Jakob Heier, Gian-Luca Bona, Raffaele Mezzenga

We describe the self-organization of PCBM and a cyanine dye on chemically patterned surfaces during spin coating from solution. On homogeneous surfaces, a transient bilayer forms, which in a later stage decomposes into PCBM droplets in a matrix of the cyan ...

2012

Heterogeneous material micro-transfer by ink-jet print assisted mould filling

Jürgen Brugger, Grégoire Maxime Smolik, Loïc Jacot-Descombes, Vaida Auzelyte

A novel combination of ink-jet printing (IJP) and micro-transfer moulding (μ-TM) for high-resolution, heterogeneous material microstructuring is demonstrated. First, IJP is used to accurately fill the micro-cavities in an elastomeric mould, thus avoiding t ...

Elsevier2012

Carbon nanotubes-SU8 composite for flexible conductive inkjet printable applications

Jürgen Brugger, László Forró, Arnaud Magrez, Richard Gaal, Marijana Mionic Ebersold, Kristopher Pataky

We have developed a conducting composite based on multi-walled carbon nanotubes and bisphenol A novolak epoxy resin (SU8) for inkjet printing purposes. We could deposit regular conducting stripes and arrays of 150 mu m spots on glass and on flexible polyet ...

2012

Numerical analysis of zeptogram/Hz-level mass responsivity for in-plane resonant nano-electro-mechanical sensors

Mihai Adrian Ionescu, Dimitrios Tsamados

This paper presents numerical analysis of an in-plane resonant nano-electro-mechanical (NEM) sensor based on mass-detection principle using a 3D FEM electromechanical simulation combined with a NEM/MOS hybrid circuit simulation. The self-assembled linker m ...

2011

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Coating

Embedded microstructures for daylighting and seasonal thermal control

ELECTROMAGNETIC CHARACTERIZATION OF MATERIALS FOR THE CLIC DAMPING RINGS

UV-curable epoxy primer for adhesion in steel reinforced polymer composites

Edge-strengthening of structural glass with protective coatings

Voltammetric Detection of Hg2+ Using Peptide-Functionalized Polymer Brushes

Dewetting-driven hierarchical self-assembly of small semiconducting molecules

Heterogeneous material micro-transfer by ink-jet print assisted mould filling

Elastic dipole antenna prepared with thin metal films on elastomeric substrate

Carbon nanotubes-SU8 composite for flexible conductive inkjet printable applications

Numerical analysis of zeptogram/Hz-level mass responsivity for in-plane resonant nano-electro-mechanical sensors

Graph Chatbot

Chat with Graph Search

Edge-strengthening of structural glass with protective coatings

Voltammetric Detection of Hg2+ Using Peptide-Functionalized Polymer Brushes

Carbon nanotubes-SU8 composite for flexible conductive inkjet printable applications

ELECTROMAGNETIC CHARACTERIZATION OF MATERIALS FOR THE CLIC DAMPING RINGS

Embedded microstructures for daylighting and seasonal thermal control

UV-curable epoxy primer for adhesion in steel reinforced polymer composites

Dewetting-driven hierarchical self-assembly of small semiconducting molecules

Heterogeneous material micro-transfer by ink-jet print assisted mould filling

Elastic dipole antenna prepared with thin metal films on elastomeric substrate

Numerical analysis of zeptogram/Hz-level mass responsivity for in-plane resonant nano-electro-mechanical sensors