A ship canal is a canal especially intended to accommodate ships used on the oceans, seas, or lakes to which it is connected.sfn|Johnson's|1883|p=1660
Ship canals can be distinguished from barge canals, which are intended to carry barges and other vessels specifically designed for river and/or canal navigation. Ships capable of navigating large bodies of open water typically have more draft, and are higher above the water than vessels for inland navigation. A ship canal therefore typically offers deeper water and higher bridge clearances than a barge canal suitable for vessels of similar length and width constraints.
Ship canals may be specially constructed from the start to accommodate ships, or less frequently they may be enlarged barge canals or canalized or channelized rivers. There are no specific minimum dimensions for ship canals, with the size being largely dictated by the size of ships in use nearby at the time of construction or enlargement.
Ship canals may be constructed for a number of reasons, including:
To create a shortcut and avoid lengthy detours.
To create a navigable shipping link between two land-locked seas or lakes.
To provide inland cities with a direct shipping link to the sea.
To provide an economical alternative to other options.
Early canals were connected with natural rivers, either as short extensions or improvements to them.
One of the first canals built was the Grand Canal of China, which was developed over a long period starting in the 5th century BCE. In the modern era, canals in the United Kingdom are typically associated with the Duke of Bridgewater, who hired the engineer James Brindley and had the first canal (the Bridgewater Canal) built that ran over a flowing river.
In the United States, the canal that brought about an age of canal building was the Erie Canal. It was a long-sought-after canal and connected the Great Lakes to the Hudson River. This canal initiated a half-century-long boom of canal building and brought about many new features that allowed canals to be used in different areas previously inaccessible to canals.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
A body of water, such as a river, canal or lake, is navigable if it is deep, wide and calm enough for a water vessel (e.g. boats) to pass safely. Such a navigable water is called a waterway, and is preferably with few obstructions against direct traverse that needed avoiding, such as rocks, reefs or trees. Bridges built over waterways must have sufficient clearance. High flow speed may make a channel unnavigable due to risk of ship collisions. Waters may be unnavigable because of ice, particularly in winter or high-latitude regions.
A waterway is any navigable body of water. Broad distinctions are useful to avoid ambiguity, and disambiguation will be of varying importance depending on the nuance of the equivalent word in other languages. A first distinction is necessary between maritime shipping routes and waterways used by inland water craft. Maritime shipping routes cross oceans and seas, and some lakes, where navigability is assumed, and no engineering is required, except to provide the draft for deep-sea shipping to approach seaports (channels), or to provide a short cut across an isthmus; this is the function of ship canals.
Canals or artificial waterways are waterways or engineered channels built for drainage management (e.g. flood control and irrigation) or for conveyancing water transport vehicles (e.g. water taxi). They carry free, calm surface flow under atmospheric pressure, and can be thought of as artificial rivers. In most cases, a canal has a series of dams and locks that create reservoirs of low speed current flow. These reservoirs are referred to as slack water levels, often just called levels.
Les aménagements hydrauliques sont indispensable pour garantir l'approvisionnement en énergie écophile et renouvelable, de même que l'approvisionnement en eau de bonne qualité et en quantité suffisant
The interplay between streamwise flow, curvature-induced secondary flow, sediment transport and bed morphology leads to the formation of a typical bar-pool bed morphology in open-channel bends. The associated scour at the outer bank and deposition at the i ...
Curved reaches and bends are a characteristic feature of rivers and channels. Their morphology is heterogeneous and typically includes a point bar at the inner side of bends, and bend scour at the outer side. Curvature-induced secondary flow, also called s ...
EPFL - LCH2013
, ,
In open-channel bends, interactions between streamwise flow, curvature-induced secondary flow and sediment transport lead to a typical bar-pool bed topography. Erosion occurs near the outer bank that can endanger structures, whereas deposition occurs near ...