Concept

Chobham armour

Related publications (33)

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

Iop Publishing Ltd2024

Systematic investigations of uranium carbide composites oxidation from micro- to nano-scale: Application to waste disposal

Nhât-Tân Vuong

The production of radioisotope beams at the ISOLDE (Isotope Separator OnLine DEvice) facility at CERN is achieved by irradiating target materials (e.g. uranium carbides and metal foils) with protons. The materials are usually operated at temperatures above ...

EPFL2021

Improving delamination resistance through tailored defects

John Botsis

Delamination is a well-known damage mode exhibited by laminated composites which has been extensively studied in unidirectional laminates (UD). In this work, a novel strategy consisting of the introduction of a small interlaminar defect to enhance the frac ...

2020

Unraveling the complexity of oxygen reactions on Pt surfaces

Rainer Beck, Ana Gutiérrez González

Platinum (Pt) is a key material in automotive catalytic converters used to clean up the exhaust of the combustion engine. Pt particles in a ceramic matrix serve as an oxidation catalyst to eliminate toxic carbon monoxide (CO) and unburned hydrocarbons (CxH ...

2019

Thermo-mechanical stability of lightweight glass-free photovoltaic modules based on a composite substrate

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Hengyu Li, Laure-Emmanuelle Perret Aebi, Valentin Chapuis, Ana Cristina Oliveira Martins

Lightweight PV modules are attractive for building-integrated photovoltaic (BIPV) applications, especially for renovated buildings, where the additional load bearing capacity is limited. This work focuses on the development of a lightweight, glass-free pho ...

ELSEVIER SCIENCE BV2018

Products of in situ corrosion of depleted uranium ammunition in Bosnia and Herzegovina soils

Rizlan Bernier-Latmani, Barbora Bártová, Yuheng Wang, Konstantin von Gunten

Hundreds of tons of depleted uranium (DU) ammunition were used in previous armed conflicts in Iraq, Bosnia and Herzegovina, and Serbia/Kosovo. The majority (>90%) of DU penetrators miss their target and, if left in the environment, corrode in these postcon ...

Amer Chemical Soc2016

20 Hz X-ray tomography during an in situ tensile test

Andreas Mortensen

This paper describes an in-situ tensile test in synchrotron tomography achieved for the first time with a frequency of 20 tomograms per second (20 Hz acquisition frequency). This allows us to capture rapid material fracture processes, such as that of a met ...

Springer2016

Metal diamond composites: Challenges in interface design

Ludger Weber

Metal-diamond composites have been identified as promising materials for applications in which high thermal conductivity and low coefficient of thermal expansion is required, e.g. applications of thermal management. Besides the intrinsic properties of the ...

2014

Recent progress in research on tungsten materials for nuclear fusion applications in Europe

Ho Ling Li, Nadine Baluc, Lyubomira Veleva, Antoine Cyril David Hoffmann

The current magnetic confinement nuclear fusion power reactor concepts going beyond ITER are based on assumptions about the availability of materials with extreme mechanical, heat, and neutron load capacity. In Europe, the development of such structural an ...

Elsevier Science Bv2013

Thermal Boundary Conductance between metals and dielectrics

Christian Monachon

This work consists in an experimental study of the main parameters governing the transport of heat across an interface between two solids, when it is dominated by phonons. The main experimental tool used is Time-Domain ThermoReflectance (TDTR), which is an ...

EPFL2013

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.