Concept

Nuclear reactor safety system

Related publications (50)

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Gamma noise to non-invasively monitor nuclear research reactors

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari, Pavel Frajtag, Tom Mager

Autonomous nuclear reactor monitoring is a key aspect of the International Atomic Energy Agency’s strategy to ensure nonproliferation treaty compliance. From the rise of small modular reactor technology, decentralized nuclear reactor fleets may strain the ...

2024

Overview on the Applicability of the ITER/NPP-Like Technologies to the DEMO Plant Electrical System and Promising Alternatives

Damien Fasel, Zhe Chen, Elena Gaio, Alberto Ferro, Francesco Santoro, Hanwen Zhang

The Plant Electrical System (PES) of the European DEMOnstration fusion power plant (DEMO), presently under conceptual design, shall supply power to the loads and deliver net power to the Power Transmission Grid (PTG). Starting from the available requiremen ...

Piscataway2024

Advanced methodologies for modeling and assessment of SFR safety functions

Janos Bodi

The present doctoral work was performed to contribute to the conceptual design development and safety assessment of a Generation IV Sodium Fast Reactor (SFR) in the frame of the European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ES ...

EPFL2022

Compact Thermosyphon Cooling System For High Heat Flux Servers: Validation Of Thermosyphon Simulation Code Considering New Test Data

John Richard Thome, Jackson Braz Marcinichen, Raffaele Luca Amalfi, Filippo Cataldo

Passive, gravity-driven thermosyphons represent a stepchange in technology towards the goal of greatly reducing PUE (Power Usage Effectiveness) of datacenters by replacing energy hungry fans of air-cooling approach with a highly-reliable solution able to d ...

AMER SOC MECHANICAL ENGINEERS2021

Radiation detection and energy conversion in nuclear reactor environments by hybrid photovoltaic perovskites

László Forró, Endre Horvath, Andrzej Sienkiewicz, Bálint Náfrádi, Márton Kollár, Pavao Roko Andricevic

Detection and direct power conversion of high energy and high intensity ionizing radiation could be a key element in next generation nuclear reactor safety systems and space-born devices. For example, the Fukushima catastrophe in 2011 could have been large ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Development of Advanced Methodologies for Monitoring and Modelling of Neutron Noise in Modern LWR Cores

Dionysios Chionis

Nuclear reactors are inherently stochastic systems, in which neutronic and thermal-hydraulic parameters fluctuate continuously even during steady-state conditions. In addition, structural components vibrate due to the coolant hydraulic forces. This stochas ...

EPFL2020

Design Concept and Thermal & x2013;Mechanical Analysis of the Optical Mirror (M3) for the ITER ECH Upper Launcher

Timothy Goodman, René Chavan

The mirror M3 is a part of the in-vessel quasi-optical beam propagation system for the ITER electron cyclotron heating upper launcher (ECHUL). The millimeter waves are guided through fixed mirror sets (M1, M2, and M3) and the front steering mirror set (M4) ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020

Systematic Sensitivity and Uncertainty Analysis of Sodium-Cooled Fast Reactor Systems

Friederike Bostelmann

Sodium-cooled fast reactor (SFR) technologies have the potential to guarantee energy supply and to reduce the burden of nuclear waste for future generations. For an adequate simulation of these reactor systems, well-established tools that have so far been ...

EPFL2020

Numerical Simulation and Validation of Aerosol Particle Removal by Water Spray Droplets With OpenFOAM During the Fukushima Daiichi Fuel Debris Retrieval

Hui Liang

In the decommissioning of damaged Fukushima Daiichi reactors, the melted and re-solidified fuel debris in the bottom of the reactor pressure vessel and primary containment vessel need to be cut into small pieces before removing them from reactor buildings. ...

2020

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.