Paul BowenDr. P. Bowen after gaining his BSc in Physics at Imperial College (UK), he obtained his Ph.D. in Physical Chemistry in the field of catalysis from the University of Cambridge, UK, in 1982, He then worked at the BP Research Centre, Sunbury, UK, for 4 years in applied surface sciences before moving to Switzerland and EPFL in 1987. He has been at the Powder Technology Laboratory, in the Materials Institute since its conception in 1988. He has over 190 publications and has written an undergraduate book on ceramic synthesis and processing. Education: 1976-1979 Imperial College of Science and Technology, University of London. B.Sc. Honours in Physics. 1979-1982 Department of Physical Chemistry, University of Cambridge. Certificate of Postgraduate Studies in Chemistry. Thesis: A Mössbauer Study of Some Clay Minerals and their Surfaces. Ph.D. in Physical Chemistry. Thesis: An Iron-57 and Tin-119 Mössbauer Spectroscopic Study of Some Graphite Intercalation Compounds and Carbon Supported Iron Catalysts. Professional Experience: 1983-1986 Research Scientist (Physical Chemist), New Technology Division, British Petroleum Company plc, BP Research Centre, Sunbury on Thames, Middlesex TW16 7LN, England. 1987-1988 Engineer, Ceramics Laboratory, Département des Matériaux, Ecole Polytechnique Fédérale de Lausanne, CH - 1015 Lausanne, Switzerland. 1988-2008 Research Associate/lecturer, Powder Technology Laboratory (Present) Institute des Matériaux, Ecole Polytechnique Fédérale de Lausanne, CH - 1015 Lausanne, Switzerland. 1988- 2015 Maitre DEnsiegnement et Recherche (Lecturer & Researcher), Powder Technology Laboratory, Institute des Matériaux, Ecole Polytechnique Fédérale de Lausanne,CH - 1015 Lausanne, Switzerland 2015 – present Adjunct Professor (Professeur Titulaire), Powder Technology Laboratory (LTP), Materials Institute, Ecole Polytechnique Fédérale de Lausanne (EPFL), CH - 1015 Lausanne, Switzerland
Paul MuraltPaul Muralt received a diploma in experimental physics in 1978 at the Swiss Federal Institute of Technology ETH in Zurich. He accomplished his Ph.D. thesis in the field of commensurate-incommensurate phase transitions at the Solid State Laboratory of ETH. In the years 1984 and 1985 he held a post doctoral position at the IBM Research Laboratory in Zurich where he pioneered the application of scanning tunneling microscopy to surface potential imaging. In 1987, after a stay at the Free University of Berlin, he joined the Balzers group in Liechtenstein. He specialized in sputter deposition techniques, and managed since 1991 a department for development and applications of Physical Vapor Deposition and PECVD processes. In 1993, he joined the Ceramics Laboratory of EPFL in Lausanne. AS group leader for thin films and MEMS devices, he specialized in piezoelectric and pyroelectric MEMS with mostly Pb(Zr,Ti)O3 and AlN thin film. His research interests are in thin film growth in general, and more specifically in property assessment of small ferroelectric structures, in integration issues of ferroelectric and other polar materials, property-microstructure relationships, and applications of polar materials in semiconductor and micro-electro-mechanical devices. More recently he extended his interests to oxide thin films of ionic conductors. The focus in piezoelectric thin films was directed towards AlN-ScN alloys. He gives lectures in thin film processing, micro fabrication, and surface analysis. He authored or co-authored more than 230 scientific articles. He became Fellow of IEEE in 2013. In 2005, he received an outstanding achievement award at the International Symposium on Integrated Ferroelectrics (ISIF), and in 2016 the B.C. Sawyer Memorial award.
Chairman of the International Workshops on Piezoelectric MEMS(http://www.piezomems2011.org/) Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Manuel Alexandre PouchonResearcher in experimental and theoretical materials science, specializing in the development of nuclear fuels since 1997, and structural materials for nuclear reactors since 2004. Presently leading nuclear materials lab (LNM) and the advanced nuclear materials (ANM) group and programme at the Paul Scherrer Institute (PSI) in Switzerland. The applicability of different material candidates in advanced nuclear reactors is researched. Especially different aspects of radiation damage are investigated. For this purpose the concept of sample miniaturization is applied and further developed. Recently leading a new activity in particle fuel production and application. Previously working for the FUJI project at PSI, where different nuclear fuel forms for fast reactors were produced, characterized and finally irradiated in reactor. This work was performed in collaboration with the Japan Nuclear Cycle Development Institute (JNC) and Nuclear Research & consultancy Group (NRG) in the Netherlands. Previously an International Fellow at JNC investigating the thermal conductivity, sintering behaviour, and mechanical interaction of ceramic-sphere fuel beds; this includes the use of finite element methods for simulating various behaviours. Previously at the Paul Scherrer Institute (PSI) and for the Inert Matrix Fuel Project for burning plutonium in light water reactors, investigating the thermal conductivity and the diffusion and solubility of fission products of a zirconia-based non-fertile matrix.
Nava SetterNava Setter completed MSc in Civil Engineering in the Technion (Israel) and PhD in Solid State Science in Penn. State University (USA) (1980). After post-doctoral work at the Universities of Oxford (UK) and Geneva (Switzerland), she joined an R&D institute in Haifa (Israel) where she became the head of the Electronic Ceramics Lab (1988). She began her affiliation with EPFL in 1989 as the Director of the Ceramics Laboratory, becoming Full Professor of Materials Science and Engineering in 1992. She had been Head of the Materials Department in the past and more recently has served as the Director of the Doctoral School for Materials.
Research at the Ceramics Laboratory, which Nava Setter directs, concerns the science and technology of functional ceramics focusing on piezoelectric and related materials: ferroelectrics, dielectrics, pyroelectrics and also ferromagnetics. The work includes fundamental and applied research and covers the various scales from the atoms to the final devices. Emphasis is given to micro- and nano-fabrication technology with ceramics and coupled theoretical and experimental studies of the functioning of ferroelectrics.
Her own research interests include ferroelectrics and piezoelectrics: in particular the effects of interfaces, finite-size and domain-wall phenomena, as well as structure-property relations and the pursuit of new applications. The leading thread in her work over the years has been the demonstration of how basic or fundamental concepts in materials - particularly ferroelectrics - can be utilized in a new way and/or in new types of devices. She has published over 450 scientific and technical papers.
Nava Setter is a Fellow of the Swiss Academy of Technical Sciences, the Institute of Electrical and Electronic Engineers (IEEE), and the World Academy of Ceramics. Among the awards she received are the Swiss-Korea Research Award, the ISIF outstanding achievement award, and the Ferroelectrics-IEEE recognition award. In 2010 her research was recognized by the European Union by the award of an ERC Advanced Investigator Grant. Recently she received the IEEE-UFFC Achievement Award (2011),the W.R. Buessem Award(2011), the Robert S. Sosman Award Lecture (American Ceramics Society) (2013), and the American Vacuum Society Recognition for Excellence in Leadership (2013).
Stefano MischlerStefano Mischler obtained the diploma in materials science in 1983 at the Swiss Federal Institute of Technology ETHZ in Zurich. He accomplished his PhD thesis in the field of surface analysis and corrosion at the Materials department of the Swiss Federal Institute of Technology EPFL in Lausanne in 1988. In the years 1989-1990 he held a postdoctoral position at the United Kingdom Atomic Energy Establishment in Harwell (Oxfordshire) where he developed novel quantification procedures for Auger Electron Spectroscopy and high lateral resolution surface analytical methods for fiber reinforced ceramics. In 1991 he joined the newly created Tribology group at the Laboratory for Metallurgical Chemistry of the EPFL where he developed research activities in the field of wear-corrosion interactions (tribocorrosion) and of tribological coatings. He is currently head of the tribology group and is developing a reserach and training activity devoted to modern aspects of tribology and surface science and technology, including surface chemical effects in tribology, biotribology and biocorrosion, tribology in microfabrication processes and wear protection methods. In 2006 he spent a sabbatical leave of 3 months at the Tokyo Medical and Dental University, Institute of Biomaterials.
Anirudh Raju NatarajanAnirudh received a B.Tech. in Metallurgical and Materials Engineering from the Indian Institute of Technology, Madras, a M.S in Materials Science and Engineering from the University of Michigan, Ann Arbor and a Ph.D. in Materials from the University of California, Santa Barbara. He set up the laboratory of materials design and simulation (MADES) at EPFL in 2022. His research interests are in the computational design and discovery of advanced engineering materials.
