Publications related to Olive oil

Intube Flow Boiling of R-407C and R-407C/Oil Mixtures. Part 2: Plain Tube Results and Predictions

John Richard Thome, Daniel Favrat, Olivier Zürcher

Intube evaporation tests for R-407C and R-407C/oil are reported for a plain copper tube. The tests were run at a nominal inlet pressure of 6.45 bar (93.5 psia) at mass velocities of 100, 200 and 300 kg/m2s (73581, 147162 and 220743 lb/h ft2) over nearly th ...

1998

Heat Transfer and Pressure Drop in the Dryout Region of Intube Evaporation with Refrigerant/Lubricant Mixtures.

John Richard Thome, Daniel Favrat, Olivier Zürcher

A summary of the objectives and conclusions reached in this project are: •A litterature search on post dryout heat transfer for pure refrigerants and for refrigerant-oil mixtures was performed and a comprehensive review written (Chapters 9, 10, and 11); •T ...

1996

Evaporation du réfrigérant HFC 407C sur des tubes lisses ou à surface améliorée.

John Richard Thome, Daniel Favrat, Olivier Zürcher

The substitution of CFC refrigerants in refrigeration systems, heat pumps and organic Rankine cycles for heat recovery, requires good methods for predicting heat transfer of substitute fluids. The measurements in the LENI test facility (concentric tubes wi ...

1996

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.