Publications related to Occupational stress

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Andreas Mortensen, Léa Deillon, Suzanne Godelieve Alphonsine Verheyden

A microcasting process is used to produce high aspect ratio ( > 30) monocrystalline pure aluminium wires with a diameter between 14 and 115 mu m. The role of thermal activation in the plastic deformation of these microwires is measured by means of (single) ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Persistence of variant selection in red gold alloys

Roland Logé, Cyril Cayron, Margaux Nathalie Dominique Larcher

Recently, a new thermally activated distortion with amplification (TADA) effect has been reported in red gold alloys caused by the A1 -> L1(0) phase transformation. The macroscopic amplification is due to the persistence of variant selection nucleated unde ...

ELSEVIER SCIENCE SA2022

Volume change response and fabric evolution of granular MX80 bentonite along different hydro-mechanical stress paths

Alessio Ferrari, Jose Antonio Bosch Llufriu, Patrycja Ewelina Baryla

Despite the increasing understanding of bentonite behaviour, there is still missing evidence on how different hydro-mechanical loadings, including sequences of hydration and compression, affect the fabric and the volume change behaviour of the material. It ...

Springer Nature2022

Scaling Description of Creep Flow in Amorphous Solids

Matthieu Wyart, Thomas Willem Jan de Geus, Wencheng Ji, Marko Popovic

Amorphous solids such as coffee foam, toothpaste, or mayonnaise display a transient creep flow when a stress E is suddenly imposed. The associated strain rate is commonly found to decay in time as gamma_ -t-nu, followed either by arrest or by a sudden flui ...

AMER PHYSICAL SOC2022

Stress effects on the impedance and ferroelectricity of PVDF-BiFeO3-MWCNT films using xanthan gum as dispersant

Frank Nüesch, Francis Owusu

Composite films based on dispersions of bismuth ferrite (BiFeO3) in polyvinylidene fluoride (PVDF) matrixes were prepared in the presence of multiwalled-carbon-nanotubes (MWCNT), using xanthan gum (XG) as dispersant. Films were prepared by spin coating and ...

ELSEVIER SCIENCE SA2022

Role of Stress History on the Swelling-Shrinkage Behavior of Compacted Scaly Clay

Alessio Ferrari

Compacted scaly clays are complex geomaterials widely used for the realization of dam cores and waste dump liners. This research aims to investigate the swelling/shrinkage behavior of these geomaterials subjected in an oedometric cell to complex hydromecha ...

ASCE-AMER SOC CIVIL ENGINEERS2022

Three-dimensional stress state during dynamic shear rupture propagation along frictional interfaces in elastic plates

Jean-François Molinari, Roozbeh Rezakhani

The state of stress in plates, where one geometric dimensions is much smaller than the others, is often assumed to be of plane stress. This assumption is justified by the fact that the out-of-plane stress components are zero on the free-surfaces of a plate ...

ELSEVIER2022

Recent advances in fiber optic sensors for respiratory monitoring

Jiangtao Zhou, Yiping Wang, Dan Liu

There is a growing need to measure respiratory rate (RR) in a variety of applications, including in clinical and occupational settings, as well as during physical exercises. Fiber optic sensors (FOSs) is an attractive solution for wearable RR monitoring be ...

ELSEVIER SCIENCE INC2022

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Occupational stress

Quantitative study of the thickness-dependent stress in indium tin oxide thin films

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Persistence of variant selection in red gold alloys

Eulerian simulation of complex suspensions and biolocomotion in three dimensions

Volume change response and fabric evolution of granular MX80 bentonite along different hydro-mechanical stress paths

Scaling Description of Creep Flow in Amorphous Solids

Stress effects on the impedance and ferroelectricity of PVDF-BiFeO3-MWCNT films using xanthan gum as dispersant

Role of Stress History on the Swelling-Shrinkage Behavior of Compacted Scaly Clay

Three-dimensional stress state during dynamic shear rupture propagation along frictional interfaces in elastic plates

Recent advances in fiber optic sensors for respiratory monitoring

Graph Chatbot

Chat with Graph Search

Recent advances in fiber optic sensors for respiratory monitoring

Three-dimensional stress state during dynamic shear rupture propagation along frictional interfaces in elastic plates

Volume change response and fabric evolution of granular MX80 bentonite along different hydro-mechanical stress paths

Eulerian simulation of complex suspensions and biolocomotion in three dimensions

Quantitative study of the thickness-dependent stress in indium tin oxide thin films

Persistence of variant selection in red gold alloys

Stress effects on the impedance and ferroelectricity of PVDF-BiFeO3-MWCNT films using xanthan gum as dispersant

The thermally activated deformation behaviour of single-crystalline microcast aluminium wires

Scaling Description of Creep Flow in Amorphous Solids

Role of Stress History on the Swelling-Shrinkage Behavior of Compacted Scaly Clay