Related publications (77)

Homogenous power distribution along gyrotron collector walls

Stefano Alberti, Jean-Philippe Hogge, Damien Fasel, Ugo Siravo, Jérémie Dubray, Miguel Filipe Silva Füglister, Pierre-François Isoz

EC RF power sources will play a major role in the future operation of large scale tokamaks (ITER, DEMO). A 1MW/170GHz gyrotron is the standard RF power unit considered for ITER. Even though the efficiency of such devices has been significantly increased th ...
2023

Toward a brightness upgrade to the SwissFEL: A high gradient traveling-wave rf photogun

Mike Seidel, Paolo Craievich, Sven Reiche, Anastasiya Magazinik

The first generation of S-band injectors for free-electron lasers has illustrated high reliability and performance by driving the latest generation of high brightness machines. However, the ultimate electron beam brightness of these devices is limited by t ...
College Pk2023

4-Port Microstrip planar resonator for multiband microwave material characterization applications

Anja Skrivervik, Sujith Raman

Planar microstrip resonators suitable for material characterization application are presented in this paper. The prototype consists of three resonators fed through four ports in a planar dielectric substrate without any additional resonators. The resonator ...
IEEE2022

Emittance growth suppression with a multibunch feedback in high-energy hadron colliders: Numerical optimization of the gain and bandwidth

Xavier Buffat, Sondre Vik Furuseth

A transverse feedback system can effectively mitigate the emittance growth caused by injection oscillations and machine noise in hadron beams. However, as its action on the beam depends on beam position measurements of finite accuracy, it introduces additi ...
AMER PHYSICAL SOC2021

The high-power helicon program at DIII-D: gearing up for first experiments

Alessandro Marinoni

Helicon current drive (CD), also called fast wave CD in the lower hybrid range of frequencies, has long been regarded as a promising CD tool for reactor grade plasmas. A newly installed MW-level system at DIII-D will be the first test of this technology in ...
IOP Publishing Ltd2021

Prototype mitre bends of the ex-vessel waveguide system for the ITER upper launcher: Thermal hydraulic simulations and experiments with off-center mm-wave beams

Timothy Goodman, René Chavan, Anastasia Xydou, Matteo Vagnoni, Humberto Torreblanca Quiroz

On ITER, long pulse gyrotrons are required as a power source for electron cyclotron heating (ECH) and current drive (CD). The microwaves are guided from the gyrotrons, which are placed far from the Tokamak, into the plasma by transmission lines (TLs) and a ...
2021

Simulation and experimental study of proton bunch self-modulation in plasma with linear density gradients

Ambrogio Fasoli, Ivo Furno, Patrick Blanchard, Yanis Andrebe, Riccardo Agnello, Falk Hans Braunmüller, Christine Stollberg, Sun Hee Kim, Alban Sublet

We present numerical simulations and experimental results of the self-modulation of a long proton bunch in a plasma with linear density gradients along the beam path. Simulation results agree with the experimental results reported [F. Braunmller, T. Nechae ...
AMER PHYSICAL SOC2021

Linear studies of spurious backward-wave instabilities in a dielectric-loaded smooth-wall gyrotron beam ducts

Stefano Alberti, Jean-Philippe Hogge, Jérémy Genoud

Recently developed self-consistent models for beam-wave interaction simulations of a gyrotron oscillator have been extended to study spurious backward-wave instabilities in smooth-wall circular symmetric beam ducts. Starting from a purely metallic case, th ...
IEEE2020

Influence of ion-induced secondary electron emission parameters in PICMC plasma simulations with experimental validation in DC cylindrical diode and magnetron discharges

Ivo Furno, Alban Sublet, Thibaut François Hugo Richard

Niobium thin lms are used at CERN (European Organization for Nuclear Research) for coatings of superconducting radio-frequency (SRF) accelerating cavities. Numerical simulations can help to better understand the physical processes involved in such coatings ...
2020

Aqueous effluent treatment system

Jeremy Luterbacher, Gaël Peng, Frédéric Edouard Juillard, Lionel Bertschy

Aqueous effluent treatment system (2) including a separation reactor (4) having a reactor chamber fluidly connected to an aqueous effluent source (3), connected via a pump (5) to an inlet (34) of the reactor chamber, a fluid extraction system (6) connected ...
2020

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.