Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The subject of this project is to develop a high performance air water heat pump which is able to be introducted in the retrofit market. The system requirements of this market are heating temperatures of 65°C, at ambient temperatures descending until -12°C ...
The aim of this thesis was to develop a new type of liquid-core capsules obtained by co-extrusion using the laminar jet break-up technique. These capsules, composed of an organic phase as the core and a hydrogel membrane, were meant to be applied as an in- ...
The Laboratory of Industrial Energy systems has evaluated a series of high performance air-water heat pump concepts with the aim to retrofit existing fuel fired boilers for residential hydronic heating systems. The results are published within the framewor ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200 and 300 kg/m2s (73500, 147000 an ...
The invention relates to a device for measuring the quality and/or degradation of a fluid, especially an oil, comprising a sensor consisting of at least one pair of electrodes which are distanced from each other. Said sensor is immersed in the fluid which ...
The thesis describes the development of surfaces that model the surface of human hair in order to characterize the adsorption of detergents and perfumes. Three types of model surfaces were investigated consisting of (i) a self-assembled monolayer of protei ...
High-speed bearings and electrical motors are gradually getting available. This is of particular interest for the application of thermal turbomachinery. The availability of high speed bearing and motor components opens the way to new applications for low p ...
Intube evaporation tests for R-407C and R-407C/oil are reported for a microfin tube. The tests were run at a nominal inlet pressure of 6.45 bar (93.5psia) at mass velocities of 100, 200 and 300 kg/m2s (73581, 147162 and 220743 lb/h ft2) over nearly the ent ...
This thesis presents a system approach with the aim to develop improved concepts for small capacity, high temperature lift air-water heat pumps. These are intended to replace fuel fired heating systems in the residential sector, which leads to a major redu ...
Intube flow boiling experiments for refrigerant R-134a mixed with a lubricating oil are reported for a plain, horizontal tube. The tests were run at a nominal inlet pressure of 3.4 bar over a wide range of vapor qualities at mass velocities of 100, 200, an ...