Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Selenium (mainly in the forms of selenite (Se(IV)) and selenate (Se(VI)) is a regulated drinking water contaminant, but there is little information on the kinetics and mechanisms of Se(IV) oxidation during water treatment. Species-specific and apparent sec ...
As ocean-going ships begin implementing chemical disinfection to treat ballast water, the potential formation of disinfection by-products (DBPs) is an important issue of concern. This is especially critical since ballast waters are often saline, and the in ...
In this study, the changes in UV absorbance at 254 nm (UVA(254)) and electron donating capacity (EDC) were investigated as surrogate indicators for assessing removal of micropollutants and bromate formation during ozonation of wastewater effluents. To meas ...
Bromide (Br-) is present in all water sources at concentrations ranging from similar to 10 to >1000 mu g L-1 in fresh waters and about 67 mg L-1 in seawater. During oxidative water treatment bromide is oxidized to hypobromous acid/hypobromite (HOBr/OBr-) a ...
The presence of iodinated disinfection by-products (I-DBPs) in drinking water poses a potential health concern since it has been shown that I-DBPs are generally more genotoxic and cytotoxic than their chlorinated and brominated analogs. I-DBPs are formed d ...
Peracetic acid (PAA) is a disinfectant considered for use in ballast water treatment, but its chemical behavior in such systems (i.e., saline waters) is largely unknown. In this study, the reactivity of PAA with halide ions (chloride and bromide) to form s ...
In this study methylisoborneol (MIB) and geosmin abatement in a surface water by conventional ozonation and the electro-peroxone (E-peroxone) process was compared. Batch tests with addition of ozone (03) stock solutions and semi-batch tests with continuous ...
The efficiency of ozone-based processes under various conditions was studied for the treatment of a surface water (Lake Zurich water, Switzerland) spiked with 19 micropollutants (pharmaceuticals, pesticides, industrial chemical, X-ray contrast medium, swee ...
During chlorination of bromide-containing waters, a significant formation of brominated disinfection byproducts is expected. This is of concern because Br-DBPs are generally more toxic than their chlorinated analogues. In this study, synthetic water sample ...
The oxidation of dissolved manganese(II) (Mn(II)) during chlorination is a relatively slow process which may lead to residual Mn(II) in treated drinking waters. Chemical Mn(II) oxidation is autocatalytic and consists of a homogeneous and a heterogeneous pr ...
