Casting defect

Applied sciences
Chemical engineering
Materials science
Casting

Related publications (27)

Page 2 of 3

About
Privacy
Disclaimer

Graph Chatbot

Chemical shrinkage of ye'elimite with and without gypsum addition

Karen Scrivener, Mohsen Ben Haha, Frank Bullerjahn

Ye'elimite (Ca4Al6O12SO4 or C(4)A(3)S) is the main hydraulic mineral present in calcium sulphoaluminate cement (CSA). Its reaction is responsible for the (early) hydration and associated cement properties such as the chemical shrinkage. This paper discusse ...

ELSEVIER SCI LTD2019

Stress relaxation in the presence of sudden strain bursts: Methodology and stress relaxation data of microcast aluminium microwires

Andreas Mortensen, Léa Deillon

This data article presents a methodology and the corresponding code developed to perform and process stress relaxation tests where samples display superimposed (i) classical, continuous logarithmic relaxation together with (ii) sudden displacements manifes ...

2018

In-situ strength of individual silicon particles within an aluminium casting alloy

Andreas Mortensen, Goran Zagar, Martin Guillermo Mueller

Measurements of local strength are performed in-situ on individual silicon particles that constitute the second phase of aluminium alloy A356. Particles are shaped using Focused Ion Beam (FIB) milling such that, upon the application of a compressive force ...

2018

Corrugated tube protocol for autogenous shrinkage measurements: review and statistical assessment

Karen Scrivener, Zhangli Hu, Pietro Lura

Among different methods of measuring early age autogenous deformation of cementitious materials, the corrugated tube method described in the ASTMC1698-09 standard is one of the most commonly used. Despite the standardization and the common application of t ...

Springer2017

Fabrication process of silicone-based dielectric elastomer actuators

Herbert Shea, Samuel Rosset, Samuel Schlatter, Oluwaseun Adelowo Araromi

This contribution demonstrates the fabrication process of dielectric elastomer transducers (DETs). DETs are stretchable capacitors consisting of an elastomeric dielectric membrane sandwiched between two compliant electrodes. The large actuation strains of ...

Journal of Visualized Experiments2016

Effect of fiber orientation on the in-plane tensile response of UHPFRC reinforcement layers

Eugen Brühwiler, Emmanuel Denarié, Maléna Bastien Masse

The application on existing Reinforced Concrete (RC) slabs of cast-on site Ultra-High Performance Fiber Reinforced cement-based Composite UHPFRC) layers is a very efficient reinforcement technique, currently spreading. For the design of these tensile reinf ...

Elsevier2016

Innovative optical lactate biosensing through the design of nanostructured materials

Oswaldo Javier Pérez Anguiano

The scope of this thesis is the synthesis of nanostructured materials, their functionalization and use for optical lactate biosensing applications. Rapid detection of L-lactate is important in many applications in the clinical sector, in the food industry, ...

EPFL2015

Structural Behavior of R-UHPFRC - RC Composite Slabs

Maléna Bastien Masse

The application on existing Reinforced Concrete (RC) slabs of cast-on-site Ultra-High Performance Fiber Reinforced cement-based Composite (UHPFRC) layers is an efficient reinforcement technique, currently spreading. The thin layer of UHPFRC, with or withou ...

EPFL2015

In situ X-ray Diffraction during Casting: Study of Hot Tearing in Al-Zn alloys

Jean-Marie Drezet, Güven Kurtuldu, Bastien Gilbert Pierre Mireux

During solidification of metallic alloys, coalescence corresponds to the formation of solid bridges between grains when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behaviour of solidif ...

Trans Tech Publications Switzerland2015

In situ Neutron Diffraction during Casting: Determination of Rigidity Point in Grain Refined Al-Cu Alloys

Jean-Marie Drezet, Bastien Gilbert Pierre Mireux

The rigidity temperature of a solidifying alloy is the temperature at which the solid plus liquid phases are sufficiently coalesced to transmit long range tensile strains and stresses. It determines the point at which thermally induced deformations start t ...

Mdpi Ag2014

Page 2 of 3

Stress relaxation in the presence of sudden strain bursts: Methodology and stress relaxation data of microcast aluminium microwires

Andreas Mortensen, Léa Deillon

2018