Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Microfluidic wet spinning has gained increasing interest in recent years as an alternative to conventional wet spinning by offering higher control in fiber morphology and a gateway for the development of multi-material fibers. Conventionally, microfluidic ...
Polymer brushes are typically densely grafted assemblies of polymer chains that are tethered via one end group to a solid substrate. Anchoring linear polymer chains via both end groups to a surface results in loop-type polymer brushes. Although loop polyme ...
New thermoplastic composites with their composition tailored at the yarn level were proposed and successfully prepared. A specific processing method was developed for composites exhibiting different fibre and porosity concentration gradients. Mechanical pr ...
The draw resonance effect appears in fiber spinning processes if the ratio of take-up to inlet velocity, the so-called draw ratio, exceeds a critical value and manifests itself in steady oscillations of flow velocity and fiber diameter. We study the effect ...
A simplified model describing the polarisation characteristics of spun fibres is proposed, aiming at determining how close to a circularly birefringent medium such a fibre is. This is of crucial importance regarding the interest of such a medium for magnet ...
Ni-Mn-Ga is a ferromagnetic shape memory alloy that exhibits large, magnetic-field- and stress-induced strains via energy dissipating twinning when processed into single crystals. Grain boundaries suppress twinning and render polycrystalline Ni-Mn-Ga britt ...
The aim of this study has been to develop processing techniques for novel bioresorbable thermoplastic cellular composites, reinforced with continuous inorganic fibres, for use as biodegradable scaffolds for bone tissue engineering. As the implanted composi ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
The results of the investigation on durability of vegetable fibre-mortar composites subjected to three different environmental conditions; immersed in water, exposed to the open air weathering and controlled cycles of wetting and drying are presented in th ...