A television production truck or OB van is a small mobile production control room to allow filming of events and video production at locations outside a regular television studio. They are used for remote broadcasts, outside broadcasting (OB), and electronic field production (EFP). Some require a crew of as many as 30 people, with additional trucks for additional equipment as well as a satellite truck, which transmits video back to the studio by sending it up through a communications satellite using a satellite dish, which then transmits it back down to the studio. Alternatively, some production trucks include a satellite transmitter and satellite dish for this purpose in a single truck body to save space, time and cost.
Other television production trucks are smaller in size and generally require two or three people in the field to manage. For instance broadcast journalism news reporters providing live television, local news in the field electronic news gathering (ENG) outside a formal television studio. In some cases, it can be a station wagon, people carrier or even a motorbike (especially in cities with congested streets or where a rapid response is needed and a motorbike is more manoeuvrable).
One of the BBC's early Outside Broadcast vehicles, MCR 1 (short for Mobile Control Room), was built by the joint Marconi-EMI company and delivered to the BBC just in time to televise the Coronation of George VI and Elizabeth in May 1937. MCR 2 was identical to MCR 1 and was delivered in the summer of 1938. The MCRs could handle three cameras. Initially, they were standard , but were later supplemented by Super Emitrons, which performed much better than the standard ones in low light. The MCRs were built on the chassis of an AEC Regal single-decker bus.
After the Second World War, the joint company Marconi-EMI ended. The BBC ordered two 3-camera MCRs from EMI. The cameras were equipped with CPS tubes, had electronic viewfinders and a 3 lens turret. MCR 4 was delivered in time to be used on the 1948 Olympics.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
An intercom, also called an intercommunication device, intercommunicator, or interphone, is a stand-alone voice communications system for use within a building, small collection of buildings or portably within a small coverage area, which functions independently of the public telephone network. Intercoms are generally mounted permanently in buildings and vehicles, but can also be detachable and portable. Intercoms can incorporate connections to public address loudspeaker systems, walkie talkies, telephones, and other intercom systems.
Outside broadcasting (OB) is the electronic field production (EFP) of television or radio programmes (typically to cover television news and sports television events) from a mobile remote broadcast television studio. Professional video camera and microphone signals come into the production truck for processing, recording and possibly transmission. Some outside broadcasts use a mobile production control room (PCR) inside a production truck. Outside radio broadcasts have been taking place since the early 1920s and television ones since the late 1920s.
Television crew positions are derived from those of film crew, but with several differences. Pre-production Work before shooting begins is called the pre-production stage. The crew in this stage include the casting director, costume designer, director, location manager, make-up artist, researcher, screenwriter, set designer, and television producer. Casting director The casting director casts actors, and so is usually one of the first crew members on the project.
As event-based sensing gains in popularity, theoretical understanding is needed to harness this technology’s potential. Instead of recording video by capturing frames, event-based cameras have sensors that emit events when their inputs change, thus encodin ...
An in situ holographic technique based on the use of a flexible miniaturized endoscope (diameter less than 1 mm) was developed for medical applications. The holographic system features a multicore optical fiber (MCF) coupled to a CCD camera to record the h ...
A holographic setup that involves the use of a multicore optical fiber as an in situ recording medium has been developed. The hologram is transmitted to a CCD camera for electronic processing, and the image is reconstructed numerically, providing more flex ...