Concept

Ammeter

Related publications (35)

EU contribution to the test and analysis of the ITER poloidal field conductor insert and the central solenoid model coil

The PFCI is a single-layer solenoid wound from a 45 m long ITER-type NbTi dual-channel cable-in-conduit conductor, designed to be representative of the one currently proposed for the ITER PF1&6 coils. The PFCI, installed in the bore of the ITER central sol ...

2009

Subthreshold Leakage Reduction: A Comparative Study of SCL and CMOS Design

Seyed Armin Tajalli, Yusuf Leblebici

The large subthreshold leakage current of static CMOS logic circuits designed in modern nanometer-scale technologies is one of the main barriers for implementing ultra-low power digital systems. Subthreshold source-coupled logic (STSCL) circuits are based ...

IEEE2009

Shunt loudspeaker techniques for use as liners for engine nacelles

Hervé Lissek

In this paper, the liner concept is an electroacoustic transducer which acoustic impedance can be changed by electrical means, be it passive or active. Among the different ways to obtain variable acoustic properties on an electroacoustic transducer's voici ...

2009

Pico-Watt Source-Coupled Logic Circuits

Seyed Armin Tajalli, Yusuf Leblebici

This article explores the main tradeoffs in design of subthreshold source-couple logic (STSCL) circuits. It is shown analytically that the bias current of each STSCL gate can be reduced to few pico-amperes with a reliable logic operation. Measurements on d ...

2008

Three-Axis Teslameter with Integrated Hall Probe

Radivoje Popovic, Pavel Kejik, Enrico Schurig

The first commercially available teslameter with a fully integrated three-axis Hall probe is described. The Hall probe chip contains horizontal and vertical Hall elements, analog electronics, and a synchronization circuit. A horizontal Hall element measure ...

Institute of Electrical and Electronics Engineers2007

Real time plasma current and elongation control using ECRH actuators

Stefano Coda, Yann Camenen, James Paley

Experiments have been carried out on TCV using Electron Cyclotron Resonance Heating (ECRH) actuators to control the plasma current and elongation in real time. In fully non-inductive plasmas, the plasma current may be driven entirely by ECCD on TCV. By rep ...

2007

Three-axis teslameter with integrated Hall probe free from the planar Hall effect

Radivoje Popovic, Pavel Kejik, Enrico Schurig

The first commercially available teslameter with a fully integrated 3-axis Hall probe is described. The Hall probe chip contains horizontal and vertical Hall elements, analogue electronics, and a synchronisation circuit. A horizontal Hall element measures ...

Institute of Electrical and Electronics Engineers2006

Three-axis teslameter with integrated hall probe free from the planar hall effect

Radivoje Popovic, Pavel Kejik, Enrico Schurig

2006

Anomalies on V-I characteristic of NbTi cable-in-conduit conductors

Pierluigi Bruzzone, Boris Stepanov

Two kinds of anomaly, observed in the Volt-Ampere Characteristic (VAC) of large NbTi cable-in-conduit conductors (CICC) are discussed. In one case, the wavy behavior of the VAC close to the current sharing range is explained with oscillations of the coolin ...

2005

The index n of the voltage-current curve, in the characterization and specification of technical superconductors

Pierluigi Bruzzone

The attention of the fusion magnet specialists has been drawn in the last years to the volt-ampere characteristic (VAC) of the large cable-in-conduit conductors (CICC), as early voltage was observed in conductor and model coil tests, far away from the expe ...

2004

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.