Hot swapping

Hot swapping is the replacement or addition of components to a computer system without stopping, shutting down, or rebooting the system; hot plugging describes the addition of components only. Components which have such functionality are said to be hot-swappable or hot-pluggable; likewise, components which do not are cold-swappable or cold-pluggable. Most desktop computer hardware, such as CPUs and memory, are only cold-pluggable. However, it is common for mid to high-end servers and mainframes to feature hot-swappable capability for hardware components, such as CPU, memory, PCIe, SATA and SAS drives. An example of hot swapping is the express ability to pull a Universal Serial Bus (USB) peripheral device, such as a thumb drive, external hard disk drive (HDD), mouse, keyboard, or printer out of a computer's USB slot or peripheral hub without ejecting it first. Most smartphones and tablets with tray-loading holders can interchange SIM cards without powering down the system. Dedicated digital cameras and camcorders usually have readily accessible memory card and battery compartments for quick changing with only minimal interruption of operation. Batteries can be cycled through by recharging reserve batteries externally while unused. Many cameras and camcorders feature an internal memory to allow capturing when no memory card is inserted. Hot swapping is used whenever it is desirable to change the configuration or repair a working system without interrupting its operation. It may simply be for convenience of avoiding the delay and nuisance of shutting down and then restarting complex equipment or because it is essential for equipment, such as a server, to be continuously active. Hot swapping may be used to add or remove peripherals or components, to allow a device to synchronize data with a computer, and to replace faulty modules without interrupting equipment operation. A machine may have dual power supplies, each adequate to power the machine; a faulty one may be hot-swapped.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts (24)

Related lectures (2)

Host adapter

In computer hardware, a host controller, host adapter, or host bus adapter (HBA), connects a computer system bus, which acts as the host system, to other network and storage devices. The terms are primarily used to refer to devices for connecting SCSI, SAS, NVMe, Fibre Channel and SATA devices. Devices for connecting to FireWire, USB and other devices may also be called host controllers or host adapters. Host adapters can be integrated in the motherboard or be on a separate expansion card.

Hot swapping

Computer

A computer is a machine that can be programmed to carry out sequences of arithmetic or logical operations (computation) automatically. Modern digital electronic computers can perform generic sets of operations known as programs. These programs enable computers to perform a wide range of tasks. A computer system is a nominally complete computer that includes the hardware, operating system (main software), and peripheral equipment needed and used for full operation.

Chemical Bonding CH-244: Quantum chemistry

Covers the fundamentals of chemical bonding and the interaction between atoms to form different types of bonds.

Thermodynamics and Energetics I ME-251: Thermodynamics and energetics I

Delves into thermodynamics, entropy, and isentropic efficiencies of components like turbines and compressors.