Michel BierlaireBorn in 1967, Michel Bierlaire holds a PhD in Mathematical Sciences from the Facultés Universitaires Notre-Dame de la Paix, Namur, Belgium (University of Namur). Between 1995 and 1998, he was research associate and project manager at the Intelligent Transportation Systems Program of the Massachusetts Institute of Technology (Cambridge, Ma, USA). Between 1998 and 2006, he was a junior faculty in the Operations Research group ROSO within the Institute of Mathematics at EPFL. In 2006, he was appointed associate professor in the School of Architecture, Civil and Environmental Engineering at EPFL, where he became the director of the Transport and Mobility laboratory. Since 2009, he is the director of TraCE, the Transportation Center. From 2009 to 2017, he was the director of Doctoral Program in Civil and Environmental Engineering at EPFL. In 2012, he was appointed full professor at EPFL. Since September 2017, he is the head of the Civil Engineering Institute at EPFL. His main expertise is in the design, development and applications of models and algorithms for the design, analysis and management of transportation systems. Namely, he has been active in demand modeling (discrete choice models, estimation of origin-destination matrices), operations research (scheduling, assignment, etc.) and Dynamic Traffic Management Systems. As of August 2021, he has published 136 papers in international journals, 4 books, 41 book chapters, 193 articles in conference proceedings, 182 technical reports, and has given 195 scientific seminars. His Google Scholar h-index is 68. He is the founder, organizer and lecturer of the EPFL Advanced Continuing Education Course "Discrete Choice Analysis: Predicting Demand and Market Shares". He is the founder of hEART: the European Association for Research in Transportation. He was the founding Editor-in-Chief of the EURO Journal on Transportation and Logistics, from 2011 to 2019. He is an Associate Editor of Operations Research. He is the editor of two special issues for the journal Transportation Research Part C. He has been member of the Editorial Advisory Board (EAB) of Transportation Research Part B since 1995, of Transportation Research Part C since January 1, 2006.
Olivier SchneiderAfter his thesis defense in particle physics in 1989 at University of Lausanne, Olivier Schneider joins LBL, the Lawrence Berkeley Laboratory (California), to work on the CDF experiment at the Tevatron in Fermilab (Illinois), first as a research fellow supported by the Swiss National Science Foundation, and later as a post-doc at LBL. He participates in the construction and commissioning of the first silicon vertex detector to operate successfully at a hadron collider; this detector enabled the discovery of the sixth quark, named "top". Since 1994, he comes back to Europe and participates in the ALEPH experiment at CERN's Large Electron-Positron Collider, as CERN fellow and then as CERN scientific staff. He specializes in heavy flavour physics. In 1998, he becomes associate professor at University of Lausanne, then extraordinary professor at the Swiss Institute of Technology Lausanne (EPFL) in 2003, and finally full professor at EPFL in 2010. Having worked since 1997 on the preparation of the LHCb experiment at CERN's Large Hadron Collider, which started operation in 2009, he is now analyzing the first data. He also contributes since 2001 to the exploitation of the data recorded at the Belle experiment (KEK laboratory, Tsukuba, Japan). These two experiments study mainly the decays of hadrons containing a b quark, as well CP violation, i.e. the non-invariance under the symmetry between matter and antimatter.
François MaréchalPh D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Denis GilletDenis Gillet received the Diploma in Electrical Engineering from the Swiss Federal Institute of Technology in Lausanne (EPFL) in 1988, and the Ph.D. degree in Information Systems also from the EPFL in 1995. During 1992 he was appointed as Research Fellow at the Information Systems Laboratory of Stanford University in the United States. He is currently Maître d'enseignement et de recherche at the EPFL School of Engineering, where he leads the React research group. His current research interests include Technologies Enhanced Learning (TEL), Human Computer Interaction (HCI), Human Devices Interaction (HDI) and Optimal Coordination of Complex and Distributed Systems. Denis Gillet is affiliated at EPFL with the Center for Intelligent Systems and the Center for Digital Education.
Kamiar AminianKamiar Aminian received the M.S. degree in electrical engineering in 1982, the Ph.D degree in biomedical engineering in 1989 and the Postgraduate degree on technical computing in 1993 from Ecole Polytechnique Fédérale de Lausanne (EPFL). He was assistant professor (1994-1996) with Sharif University of Technology (Tehran). He joint EPFL in 1996 where he is currently Professor of medical instrumentation and the director of the Laboratory of Movement Analysis and Measurement in the Institute of Bioengineering of EPFL. His research interests include methodologies for human movement monitoring and analysis in real world conditions mainly based on wearable technologies and inertial sensors with emphasis on gait, physical activity and sport. His research aims to perform outcome evaluation in orthopaedics, to improve motor function and intervention programs in aging and patients with movement disorders and pain, and to identify metrics of performance in sport science.
Kamiar Aminian is a member of the International Society of Posture and Gait Research, the Institute of Electrical and Electronics Engineers, the European Society of Movement Analysis in Adults and Children, the Prevention of fall Network Europe, the Intentional Society of Biomechanics and the President of the 3D analysis of the human movement group. He is author or co-author of more than 450 scientific papers published in reviewed journals and presented at international conferences and holds 10 patents related to medical devices.
Full CV
ORCID