Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A new combination of laser scanning confocal microscope (LSCM) and electron backscattering diffraction (EBSD) with a field-emission scanning electron microscope (SEM) is utilized to study the mechanism of bainite transformation in reheated low carbon baini ...
Steel reinforcing bars in concrete are protected from corrosion by a thin oxide film that is created on the steel surface in the highly alkaline environment of the concrete. Corrosion process begins once this oxide film is destroyed, for example, by chlori ...
This paper proposes a novel retrofitting system for the strengthening of steel I-beams using prestressed unbonded carbon fiber reinforced polymer (CFRP) plates. The system relies on a pair of mechanical clamps. Each clamp holds two flat CFRP plates (each 5 ...
Most of industrial hot deformation processes are performed in variable conditions where the strain rate and/or deformation temperature are not constant. In this work, hot compression tests in both constant and varying strain rate conditions were performed ...
Microstructure evolution within the post-dynamic regime following hot deformation was investigated in Inconel 718 samples with different dynamically recrystallized volume fractions and under conditions such that no delta-phase particles were present. In si ...
To investigate the effect of recrystallization on hot deformation mechanism of TA15 titanium alloy, rolled sheet and laser-welded tubes before and after recrystallization annealing were tested by uniaxial tensile tests and biaxial gas bulging respectively. ...
The recrystallization behaviour of Al-Mn alloys (AA3xxx series alloys) is affected by randomly distributed dispersoids present before annealing, by dispersoids precipitated at grain/subgrain boundaries before the onset of recrystallization, and by disperso ...
Two applications of post-tensioned CFRP strap elements recently developed at the Composite Construction Laboratory (CCLab) of the Swiss Federal Institute of Technology Lausanne (EPFL) are presented. The first application concerns post-tensioned non-laminat ...
In this study, the short-term bonding behaviors of prestressed CFRP plates to steel substrates and their debonding capacities have been investigated. For this purpose, single lap-shear and prestress release tests were performed on adhesively bonded CFRP-to ...
Pronounced acceleration of recrystallization in cold worked metals is generally observed during annealing with additional high density electric current pulses. In this work, continuous alternating current of low density was applied to heat cold-rolled samp ...