Publications related to Microfabrication

Microfabrication technologies in dielectrophoresis applications-A review

DEP is an established technique for particle manipulation. Although first demonstrated in the 1950s, it was not until the development of miniaturization techniques in the 1990s that DEP became a popular research field. The 1990s saw an explosion of DEP pub ...

Wiley-Blackwell2012

Multiple-frequency impedance measurements in continuous flow for automated evaluation of yeast cell lysis

Philippe Renaud, Niccolo Piacentini, Willyan Hasenkamp Carreira

This paper reports on an electrical lysis device integrating multiple-frequency impedance measurements for automated evaluation of the lysis efficiency and counting of the lysed cells. Conventional techniques use chemical reagents to dissolve the cell memb ...

Elsevier2012

Residual Stress and Buckling Patterns of Free-standing Yttria-stabilized-zirconia Membranes Fabricated by Pulsed Laser Deposition

Nico de Rooij, Danick Briand, Jérôme Courbat

The residual stress and buckling patterns of free-standing 8?mol.% yttria-stabilized-zirconia (8YSZ) membranes prepared by pulsed laser deposition and microfabrication techniques on silicon substrates are investigated by wafer curvature, light microscopy, ...

Wiley-Blackwell2012

Microfabricated rubidium vapour cell with a thick glass core for small-scale atomic clock applications

Nico de Rooij, Danick Briand, Yves Pétremand

This paper presents a new fabrication method to manufacture alkali reference cells having dimensions larger than standard micromachined cells and smaller than glass-blown ones, for use in compact atomic devices such as vapour-cell atomic clocks or magnetom ...

Institute of Physics2012

Biomimetic soft lithography on curved nanostructured surfaces

Jürgen Brugger, Thomas Kiefer, Valentin Flauraud, Vaida Auzelyte

In this paper a nano-molding process using a nature-created master is demonstrated. The eye of night moth Agotis exclamationis having 100 nm-scale structures on a curved surface is used as biomimetic master mold from which nanostructures are replicated ont ...

Elsevier2012

Syngas generation from n-butane with an integrated MEMS assembly for gas processing in micro-solid oxide fuel cell systems

Paul Muralt, Thomas Maeder, Bo Jiang, Dimos Poulikakos

An integrated system of a microreformer and a carrier allowing for syngas generation from liquefied petroleum gas (LPG) for micro-SOFC application is discussed. The microreformer with an overall size of 12.7 mm × 12.7 mm × 1.9 mm is fabricated with micro-e ...

Royal Soc Chemistry2012

In-situ grown horizontal carbon nanotube membrane

Mihai Adrian Ionescu, Dimitrios Tsamados, Hoël Maxime Guérin

We present the successful fabrication of horizontally grown and dense carbon nanotube (CNT) membranes in situ. A TiN/Al2O3/TiN stack is first patterned to be employed as a support for the CNT growth. Iron is then evaporated with a 45 degrees tilt angle on ...

Elsevier2012

Optically transparent glass micro-actuator fabricated by femtosecond laser exposure and chemical etching

Yves Bellouard

Femtosecond laser manufacturing combined with chemical etching has recently emerged as a flexible platform for fabricating three-dimensional devices and integrated optical elements in glass substrates. Here, we demonstrate an optically transparent micro-ac ...

American Institute of Physics2012

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Microfabrication

Microfabrication technologies in dielectrophoresis applications-A review

Multiple-frequency impedance measurements in continuous flow for automated evaluation of yeast cell lysis

Residual Stress and Buckling Patterns of Free-standing Yttria-stabilized-zirconia Membranes Fabricated by Pulsed Laser Deposition

Microfabricated rubidium vapour cell with a thick glass core for small-scale atomic clock applications

Biomimetic soft lithography on curved nanostructured surfaces

Syngas generation from n-butane with an integrated MEMS assembly for gas processing in micro-solid oxide fuel cell systems

Rational design and optimization of plasmonic nanoarrays for surface enhanced infrared spectroscopy

In-situ grown horizontal carbon nanotube membrane

Embedded layer of Ag nanoparticles prepared by a combined PECVD/PVD process producing SiO xC y-Ag nanocomposite thin films

Optically transparent glass micro-actuator fabricated by femtosecond laser exposure and chemical etching

Graph Chatbot

Chat with Graph Search

Microfabrication technologies in dielectrophoresis applications-A review

Rational design and optimization of plasmonic nanoarrays for surface enhanced infrared spectroscopy

Microfabricated rubidium vapour cell with a thick glass core for small-scale atomic clock applications

Residual Stress and Buckling Patterns of Free-standing Yttria-stabilized-zirconia Membranes Fabricated by Pulsed Laser Deposition

Optically transparent glass micro-actuator fabricated by femtosecond laser exposure and chemical etching

Syngas generation from n-butane with an integrated MEMS assembly for gas processing in micro-solid oxide fuel cell systems

Multiple-frequency impedance measurements in continuous flow for automated evaluation of yeast cell lysis

In-situ grown horizontal carbon nanotube membrane

Biomimetic soft lithography on curved nanostructured surfaces

Embedded layer of Ag nanoparticles prepared by a combined PECVD/PVD process producing SiO xC y-Ag nanocomposite thin films