Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Fiber-reinforced polymer (FRP) structures, due to their low mass, are valuable alternatives to traditional steel or concrete structures in seismic areas. However, to resist seismic actions, FRP structures must be able to dissipate a significant amount of i ...
Near interfacial residual stresses are investigated in a joint composed of aluminum alloy and dual phase steel. A small step neutron diffraction scan was initially performed to determine the weld interface position along the measured transverse cross secti ...
Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...
Solid oxide fuel cells (SOFCs) can convert hydrocarbon fuels, such as methane, into heat and electricity with a high conversion efficiency. The fuel flexibility of the SOFC derives from the high operating temperature (600-900 °C). Such a high temperature s ...
The mechanical properties due to solid solution strengthening are explored within the single phase face-centered cubic (fcc) domain of the Co-Cr-Fe-Mn Ni high entropy alloy (HEA) system. This is achieved by combining an efficient and reproducible metallurg ...
Steel reinforcing bars in concrete are protected from corrosion by a thin oxide film that is created on the steel surface in the highly alkaline environment of the concrete. Corrosion process begins once this oxide film is destroyed, for example, by chlori ...
Chromium evaporation is identified as a major degradation mechanism in solid oxide fuel cell (SOFC) stacks. The major chromium source is the commonly used stainless steel interconnects, thus raising a need for protective coatings on the interconnect steel. ...
Residual stresses are investigated for the first time in a dissimilar AA1050-DP450 steel magnetic pulse weld using neutron diffraction. Close to the joint interface, tensile residual stresses are observed in the Al sheet and compressive residual stresses a ...
Carbides constitute a class of materials used for many applications, where excellent mechanical properties, such as stiffness, hardness and fracture toughness, are required. The machining industry is a typical example where carbide are crucial materials. W ...
This paper aims to reveal the relationship among low-temperature toughness, microstructure and secondary crack from both microstructural and crystallographic perspectives. Instrumented Charpy tests were carried out in the upper platform, transition tempera ...
