Yttrium iron garnet | EPFL Graph Search

Yttrium iron garnet (YIG) is a kind of synthetic garnet, with chemical composition , or Y3Fe5O12. It is a ferrimagnetic material with a Curie temperature of 560 K. YIG may also be known as yttrium ferrite garnet, or as iron yttrium oxide or yttrium iron oxide, the latter two names usually associated with powdered forms. In YIG, the five iron(III) ions occupy two octahedral and three tetrahedral sites, with the yttrium(III) ions coordinated by eight oxygen ions in an irregular cube. The iron ions in the two coordination sites exhibit different spins, resulting in magnetic behavior. By substituting specific sites with rare-earth elements, for example, interesting magnetic properties can be obtained. YIG has a high Verdet constant which results in the Faraday effect, high Q factor in microwave frequencies, low absorption of infrared wavelengths down to 1200 nm, and very small linewidth in electron spin resonance. These properties make it useful for MOI (

Effect of Heat Current on Magnetization Dynamics in Magnetic Insulators and Nanostructures

Francesco Antonio Vetrò

The term "spin caloritronics" defines a novel branch of spintronics that focuses on the interplay between electron spins with heat currents. In the frame of this research area, this thesis is aimed at investigating the effect of a heat current on magnetization dynamics in two different typologies of systems and materials: magnetic insulators and metallic nanostructures. In the first case we conduct studies on yttrium iron garnet (YIG) samples subjected to a temperature gradient. The irreversible thermodynamics of a continuous medium with magnetic dipoles predicts that a thermal gradient across a YIG slab, in the presence of magnetization waves, produces a magnetic field that is the magnetic analog of the well known Seebeck effect. This thermally induced field can influence the time evolution of the magnetization, in such a way that it is possible to modulate the relaxation of the precession when applying a heat current. We found evidence for such a magnetic Seebeck effect (MSE) by conducting transmission measurements in a thin slab of YIG subjected to an in-plane temperature gradient. We showed how the MSE can modulate the magnetic damping depending on the direction of the propagating magnetostatic modes with respect to the orientation of the temperature gradient. In the second part of the thesis we focus our investigation on metallic nanostructures subjected to a heat current. In a metal, the three-current model (current of entropy, of spin up and spin down electrons) predicts that a heat current induces a spin current which will then influence the magnetization dynamics like a charge-driven spin current would. Hence, we explore what has been called Thermal Spin Torque in electrodeposited Co / Cu / Co asymmetric spin valves placed in the middle of copper nanowires. These samples are fabricated by conventional electrodeposition technique in porous polycarbonate membranes using an original method that allows high frequency electrical measurements. We used a modulated laser to investigate the effect of a temperature gradient. We observed a heat-driven spin torque by measuring electrically the quasi-static magnetic response of a spin valve when subjected to the heat current, generated by two laser diodes heating the electrical contact at one end or the other of the nanowire. Analysing the variation in the resistance induced by a heat-driven spin torque, represented by peaks occurring in correspondence with the GMR transition, we found that a temperature difference of the order of 5 K is sufficient to produce sizeable torque in spin valves.

EPFL2015

Active Ferromagnetic Metasurface with Topologically Protected Spin Texture for Spectral Filters

Jilei Chen, Dirk Grundler, Haiming Yu

Electromagnetic metasurfaces modulate a material's response to electromagnetic waves by specifically arranged elements with dimensions below the wavelength. They have opened new fields of research, including flat optics and nanophotonics on a chip. Ferromagnetic metasurfaces could become the building blocks for manipulation of both microwaves and spin waves (magnons). So far, the functionality of magnonic devices has been limited by high intrinsic damping of the materials employed, suppressing long‐distance spin‐wave propagation. Here ferromagnetic metasurfaces are reported, which are created from periodic arrays of either 15 nm thick Co20Fe60B20, Ni80Fe20 or Co nanodisks on ferrimagnetic yttrium iron garnet (YIG) hosting topologically protected vortex states. This device, a reconfigurable spectral filter, operates in the microwave regime near 0.9 GHz and manipulates long‐distance spin wave transmission in thin YIG. An efficiency of 98.5% is demonstrated, with the metasurface covering only 15% of the microwave antenna. This first dem-onstration of a ferromagnetic metasurface opens unprecedented possibilities for on-chip control of microwaves in low-damping ferrimagnetic insulators.

2022

Effect of Heat Current on Magnetization Dynamics in Magnetic Insulators and Nanostructures

Francesco Antonio Vetrò

EPFL2015