Publications related to Cable television headend

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

The European Roadmap to Fusion Electricity (Federici et al., 2018) [1] details the path to complete within the next three decades the DEMOnstration power plant, DEMO, aiming to a net gain of Energy Q=40. The 2018 DEMO baseline considers a 2 GW tokamak devi ...

ELSEVIER SCIENCE SA2023

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Ortensia Dicuonzo

The aim of this thesis is to investigate the mechanical and thermal behaviour of HTS coated conductor cables for EUROfusion DEMO magnets.One of the issue in large HTS magnets is the safety against a quench. A quench is a sudden thermal runway in which the ...

EPFL2022

Upgrade of a low-temperature scanning tunneling microscope for electron-spin resonance

Harald Brune, François Patthey, Nicolas Weiss, Donat Fabian Natterer, Tobias Bilgeri, Patrick Robert Forrester

Electron spin resonance with a scanning tunneling microscope (ESR-STM) combines the high energy resolution of spin resonance spectroscopy with the atomic scale control and spatial resolution of STM. Here we describe the upgrade of a helium-3 STM with a 2D ...

AMER INST PHYSICS2019

Compressive Multiplexing of Ultrasound Signals

Jean-Philippe Thiran, Yves Wiaux, Dimitris Perdios, Marcel Arditi, Adrien Georges Jean Besson

High-quality 3D ultrasound (US) imaging requires dense matrix-array probes with thousands of elements and necessitates an unrealistic number of coaxial cables to connect such probes to back-end systems. To address this issue, many techniques have been deve ...

IEEE2018

Compressive Multiplexing of Ultrasound Signals

Jean-Philippe Thiran, Yves Wiaux, Dimitris Perdios, Marcel Arditi, Adrien Besson

High-quality 3D ultrasound (US) imaging requires dense matrix-array probes with thousands of elements and necessitates an unrealistic number of coaxial cables to connect such probes to back-end systems. To address this issue, many techniques have been deve ...

IEEE2018

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

Ian Smith, Nizar Bel Hadj Ali, Ann Christine Sychterz

In many cable structures, special types of joints are designed to allow cables to slide freely along the joints. Thus, a number of discrete cable elements are substituted by a single continuous cable that slides over multiple nodes. Continuous cables are e ...

Elsevier2017

3D-printed Ka-band Antenna Based on Stereolithography

Juan Ramon Mosig, Tomislav Debogovic, Maria Garcia Vigueras, Joana Rita Alves dos Santos Silva

This paper presents a circularly-polarized dual-band antenna for Ka-band satellite communications which operates simultaneously in both civil and military downlink (17.7-21.2 GHz) and uplink (27.5-31 GHz) bands. The antenna is composed of a metallic ridged ...

IEEE2017

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Marcos Rubinstein, Nicolas Mora Parra

This paper reports the results of two experimental campaigns aimed at studying the high-frequency response of a raceway containing low voltage power, telephone, and Ethernet cables, to external electromagnetic field illumination. The raceway was tested aga ...

Institute of Electrical and Electronics Engineers2016

Design, Manufacture and Test of a 82kA React&Wind TF Conductor for DEMO

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov, Rainer Wesche

The Toroidal Field Coils (TFC) of the EUROFusion DEMO reactor call for Nb3Sn conductor with high field and high current. Another major requirement is the cost effectiveness, to keep the ratio of investment to electric power in the same range of the competi ...

Ieee-Inst Electrical Electronics Engineers Inc2016

Manufacture of ITER feeder sample conductors

Pierluigi Bruzzone, Bo Liu, Hongwei Li

The ITER feeders are the components that connect the ITER magnet systems located inside the main cryostat to the cryogenics, power-supply and control system interfaces outside the cryostat. The feeder busbars rely on the Cable-In-Conduit Conductor (CICC) d ...

Elsevier Science Sa2013

Cable television headend

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Upgrade of a low-temperature scanning tunneling microscope for electron-spin resonance

Compressive Multiplexing of Ultrasound Signals

Compressive Multiplexing of Ultrasound Signals

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

3D-printed Ka-band Antenna Based on Stereolithography

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Design, Manufacture and Test of a 82kA React&Wind TF Conductor for DEMO

Manufacture of ITER feeder sample conductors

Graph Chatbot

Chat with Graph Search

The MAgnet Design Explorer algorithm (MADE) for LTS, Hybrid or HTS toroidal and poloidal systems of a tokamak with a view to DEMO

3D-printed Ka-band Antenna Based on Stereolithography

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

Electromechanical investigations and quench experiments on sub-size HTS cables for high field EU-DEMO Central Solenoid

Upgrade of a low-temperature scanning tunneling microscope for electron-spin resonance

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Compressive Multiplexing of Ultrasound Signals

Design, Manufacture and Test of a 82kA React&Wind TF Conductor for DEMO

Manufacture of ITER feeder sample conductors

Compressive Multiplexing of Ultrasound Signals