Publications related to Beat 'em up

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

The knowledge of the thermal strain distribution of the Nb3Sn filaments in a cable in conduit conductor (CICC) cross section is a key parameter in understanding the cable performance evolution when it undergoes electromagnetic (EM) cyclic loading. A CICC i ...

Ieee-Inst Electrical Electronics Engineers Inc2014

Increased dynamic range for RFID EM-field measurements

Santiago Capdevila Cascante

This paper presents a new methodology to measure the electromagnetic (EM) field using RFID tags, overcoming the limitations in dynamic range arisen by the conventional excitation of RFID tags. The methodology consists in the use of two different signals wh ...

2014

A Reciclagem Crítica e a Crítica da Reciclagem: Estéticas e Espaços Culturais Híbridos

Letícia Cabeçadas Do Carmo

Esta apresentação pretende explorar algumas questões relacionadas com o espaço, a estética, a crítica e as dinâmicas culturais e arquitetónicas contemporâneas europeias. Em particular, quais os tipos de estética e de espaços que hoje em dia podemos encontr ...

2013

Is EM dead?

Graham Knott

Since electron microscopy (EM) first appeared in the 1930s, it has held centre stage as the primary tool for the exploration of biological structure. Yet, with the recent developments of light microscopy techniques that overcome the limitations imposed by ...

Company Of Biologists Ltd2013

Electromagnetic Simulation of CERN Accelerator Components and Experimental Applications

Carlo Zannini

Wakes and impedances of single accelerator elements can be obtained by means of theoretical calculation, electromagnetic (EM) simulations or bench measurements. Since theoretical calculations apply only to simple structures and bench measurements have some ...

EPFL2013

Efficient Scanning for EM Based Target Localization

Pascal Fua, Graham Knott, Raphael Sznitman, Aurélien Lucchi, Natasa Pjescic-Emedi

For biologists studying the morphology of cells, Electron Microscopy (EM) is the method of choice with its {\it nm} resolution, across increasingly larger volumes. However, the time necessary to acquire such image series is long and often limits the amount ...

2012

Constrained expectation-maximization algorithm for stochastic inertial error modeling: study of feasibility

Jan Skaloud, Stéphane Guerrier, Yannick Stebler

Stochastic modeling is a challenging task for low-cost sensors whose errors can have complex spectral structures. This makes the tuning process of the INS/GNSS Kalman filter often sensitive and difficult. For example, first-order Gauss–Markov processes are ...

Institute of Physics2011

Comparative study of dielectric loaded structures for suppressing gyro-BWO instabilities in gyrotron beam-ducts (BD) using HFSS

Stefano Alberti, Jean-Philippe Hogge, Trach-Minh Tran, Fengping Li

A comparative study of a variety of electromagnetic (EM) structures designed for suppressing a gyro-BWO instability in the W7-X gyrotron beam-duct is presented. The EM fields are calculated using the finite element code HFSS. It is shown that among dielect ...

IEEE2011

On the Static Diffie-Hellman Problem on Elliptic Curves over Extension Fields

Robert Granger

We show that for any elliptic curve

E(\mathbb{F}_{q^n})

, if an adversary has access to a Static Diffie-Hellman Problem (Static DHP) oracle, then by making

O(q^{1-\frac{1}{n+1}})

Static DHP oracle queries during an initial learning phase, for fixed $n>1 ...

Springer Berlin Heidelberg2010

Molecular electron microscopy: State of the art and current challenges

Henning Paul-Julius Stahlberg

The objective of molecular electron microscopy (EM) is to use etectron microscopes to visualize the structure of biological molecules. This Review provides a brief overview of the methods used in molecular EM, their respective strengths and successes, and ...

American Chemical Society (ACS)2008

Beat 'em up

Graph Chatbot

Chat with Graph Search

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

Increased dynamic range for RFID EM-field measurements

A Reciclagem Crítica e a Crítica da Reciclagem: Estéticas e Espaços Culturais Híbridos

Is EM dead?

Electromagnetic Simulation of CERN Accelerator Components and Experimental Applications

Efficient Scanning for EM Based Target Localization

Constrained expectation-maximization algorithm for stochastic inertial error modeling: study of feasibility

Comparative study of dielectric loaded structures for suppressing gyro-BWO instabilities in gyrotron beam-ducts (BD) using HFSS

On the Static Diffie-Hellman Problem on Elliptic Curves over Extension Fields

Molecular electron microscopy: State of the art and current challenges

Analysis of the CICC Performance Through the Measurement of the Thermal Strain Distribution of the Nb-3 Sn Filaments in the Cable Cross Section

A Reciclagem Crítica e a Crítica da Reciclagem: Estéticas e Espaços Culturais Híbridos

Constrained expectation-maximization algorithm for stochastic inertial error modeling: study of feasibility

Comparative study of dielectric loaded structures for suppressing gyro-BWO instabilities in gyrotron beam-ducts (BD) using HFSS

On the Static Diffie-Hellman Problem on Elliptic Curves over Extension Fields

Molecular electron microscopy: State of the art and current challenges

Efficient Scanning for EM Based Target Localization

Increased dynamic range for RFID EM-field measurements

Is EM dead?

Electromagnetic Simulation of CERN Accelerator Components and Experimental Applications