Concept

Heliox

Related publications (16)

Investigations and numerical modeling of mechanical properties of tempered martensitic steel Eurofer97 at various loading rates, temperatures and after spallation irradiation

The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...

EPFL2018

, , ,

Small disk tensile specimens of the reduced activation tempered martensitic steel Eurofer97 were tested from −100 °C up to 370 °C before and after irradiation in the spallation source SINQ at Paul Scherrer Institute. The calculated irradiation dose and hel ...

2018

Supercritical CO2 injection and residence time in fluid-saturated rocks: Evidence for CO2 and mineral dissolution and effects on rock integrity

Lucas Xan Pimienta, Ke Liu

CO2 injection and storage in geological reservoirs is an attractive prospect for mitigating the anthropogenic production of greenhouse gases and global warming. The technology could lead to mineral precipitation and therefore stable storage over geological ...

Elsevier Sci Ltd2017

Ferritic/martensitic steels are candidate materials for fusion reactor structural components, liquid metal containers of spallation neutron sources, and accelerator driven systems, with good radiation resistance and thermo-mechanical properties. However, e ...

EPFL2015

A new series connected 25 T hybrid magnet system is being set up by the Helmholtz Zentrum Berlin (HZB) for neutron scattering experiments. CRPP has designed and manufactured a pair of 20 kA current leads for the powering of the outer superconducting coils ...

Iop Publishing Ltd2014

Results of the test of a pair of 20 kA HTS current leads

Pierluigi Bruzzone, Rainer Wesche

2013

Transverse heat transfer coefficient in the dual channel ITER TF CICCs Part I: Analysis of steady state temperature profiles resulting from annular heating

Two ITER IF dual channel Cable-in-Conduit Conductors (CICCs) have been tested in the SULTAN test facility. The samples were heated either by foil heaters mounted on the outside of the conductor jacket or by induced AC losses. The steady-state temperature r ...

2011

Quench analysis of a high-current forced-flow HTS conductor model for fusion magnets

Rainer Wesche, Luca Bottura

A fundamental understanding of the quench phenomenon is particularly important in the design and operation of magnets using High Temperature Superconductors because the quench propagation velocity is low due to high specific heat at high temperature. We ha ...

2011

Quench Analysis of a High-Current Forced-Flow HTS Conductor Model for Fusion Magnets

Rainer Wesche, Luca Bottura

2011

Helium atoms are known to have a significant impact on materials used in fission and fusion reactors. In particular, the presence of helium atoms can change the mechanical properties and degrade the lifetime of reactors. In order to develop the helium-resi ...

EPFL2011

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.