Publications related to Lime mortar

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

The objective of this study is to analyse the mechanical and durability properties of a high-performance mortars based on low grade kaolin clay and the effect of electrical conductivity and pore microstructure on the chloride penetration resistance. A tota ...

ELSEVIER2022

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

Hisham Tarek Mohamed Hafez

Herein, an investigation of multi-generational recyclability of polypropylene fibre reinforced concrete (PPFRC) was performed. The parent concretes were produced with 0 and 6 kg/m(3) of polypropylene fibres. After recycling, the obtained coarse recycled co ...

ELSEVIER SCI LTD2022

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Ricardo Javier Serpell Carriquiry

Bed-joint structural repointing is a widely used strengthening technique in historic masonry constructions, particularly in applications where the material appearance needs to be preserved. Despite its wide use, limited research is available on the effecti ...

ELSEVIER SCI LTD2021

Spalling of concrete cover induced by reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

This paper investigates the phenomenon of cover spalling in reinforced concrete induced by bond or by the action of an inner pressure. This research is based on an experimental programme comprising a series of bond tests and a series of tests with inner-pr ...

2021

Casting position effects on bond performance of reinforcement bars

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

The phenomena associated with the consolidation of fresh concrete (bleeding and plastic settlement) are commonly considered significant for the bond performance of reinforcement. However, rules to take care of such influence for design are not consistent a ...

ERNST & SOHN2021

Characterization of interfacial transition zone in concrete prepared with carbonated modeled recycled concrete aggregates

Karen Scrivener

Treatment by accelerated carbonation has been widely studied to enhance the quality of recycled concrete aggregates (RCA) and hence the performance of new concrete produced with the RCA. This is often ascribed to the densification of RCA. This study invest ...

PERGAMON-ELSEVIER SCIENCE LTD2020

The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination

Karen Scrivener, Franco Alberto Zunino Sommariva, Emmanuelle Boehm Courjault

The use of supplementary cementitious materials as a partial replacement for Portland cement is the most effective way to reduce the carbon footprint of the concrete industry. Raw clays containing kaolinite (kaolin) are promising substitute materials. In t ...

SPRINGER2020

Influence of low curing temperatures on the tensile response of low clinker Strain Hardening UHPFRC under full restraint

Emmanuel Denarié, Mohamed Abdul Hafiz

The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...

2020

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Lime mortar

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

Nanoscale modelling of ionic transport in the porous C-S-H network

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Spalling of concrete cover induced by reinforcement

Casting position effects on bond performance of reinforcement bars

Characterization of interfacial transition zone in concrete prepared with carbonated modeled recycled concrete aggregates

The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination

Maximizing the use of supplementary cementitious materials (SCMs) in blended cements

Influence of low curing temperatures on the tensile response of low clinker Strain Hardening UHPFRC under full restraint

Graph Chatbot

Chat with Graph Search

Nanoscale modelling of ionic transport in the porous C-S-H network

The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Multi-recycling of polypropylene fibre reinforced concrete: Influence of recycled aggregate properties on new concrete

Casting position effects on bond performance of reinforcement bars

Characterization of interfacial transition zone in concrete prepared with carbonated modeled recycled concrete aggregates

Maximizing the use of supplementary cementitious materials (SCMs) in blended cements

Influence of low curing temperatures on the tensile response of low clinker Strain Hardening UHPFRC under full restraint

The impact of calcite impurities in clays containing kaolinite on their reactivity in cement after calcination

Spalling of concrete cover induced by reinforcement