Intersymbol interference

Applied sciences
Electrical engineering
Telecommunications
Modulation

Related publications (28)

About
Privacy
Disclaimer

Graph Chatbot

A Correlation-Based Electromagnetic Time Reversal Technique to Locate Indoor Transient Radiation Sources

Farhad Rachidi-Haeri, Marcos Rubinstein, Zhaoyang Wang, Qi Li

To overcome the multipath interference in locating transient electromagnetic (EM) radiation sources in an indoor environment, we propose a criterion that calculates the correlation between back-propagated signals from observation points, to be used in EM t ...

Institute of Electrical and Electronics Engineers2021

A 32 Gb/s PAM-16 TX and ADC-Based RX AFE with 2-tap embedded analog FFE in 28 nm FDSOI

Yusuf Leblebici, Firat Çelik, Ayça Akkaya

This paper presents a 32 Gb/s 16-level pulse amplitude modulation (PAM-16) source-series-terminated transmitter (TX) and a receiver (RX) analog front-end (AFE) in 28 nm FDSOI. The 8-way time-interleaved successive-approximation register (SAR) analog-to-dig ...

2021

On the Advantage of Coherent LoRa Detection in the Presence of Interference

Andreas Peter Burg, Alexios Konstantinos Balatsoukas Stimming, Orion Afisiadis, Joachim Tobias Tapparel, Sitian Li

It has been shown that the coherent detection of long range (LoRa) signals only provides marginal gains of around 0.7 dB on the additive white Gaussian noise (AWGN) channel. However, ALOHA-based massive Internet-of-Things systems, including LoRa, often ope ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Bluetooth Low Energy Direction Finding Principle

Yves Perriard, Alexis Boegli, Pooneh Mohaghegh

The ubiquitous implementation of 5G networks and the Internet of Things (IoT), brings about the importance of indoor localization. Even though Global Positioning System (GPS) provides an efficient outdoor Positioning System (PS), indoor positioning techniq ...

IEEE2021

Sampling and Reconstruction of Bandlimited Signals with Multi-Channel Time Encoding

Martin Vetterli, Karen Adam, Adam James Scholefield

Sampling is classically performed by recording the amplitude of the input at given time instants; however, sampling and reconstructing a signal using multiple devices in parallel becomes a more difficult problem to solve when the devices have an unknown sh ...

2020

Kramers Kronig detection of four 20 Gbaud 16-QAM channels using Kerr combs for a shared phase estimation

Tobias Kippenberg, Maxim Karpov, Martin Hubert Peter Pfeiffer, Arne Kordts, Fatemeh Alishahi, Ahmad Fallahpour

We experimentally demonstrate Kramers-Kronig detection of four 20 Gbaud 16-quadrature-amplitude-modulated (QAM) channels after 50 km fiber transmission using two soliton Kerr combs as signal sources and local oscillators. The estimated carrier phase at the ...

OPTICAL SOC AMER2020

Understanding and Mitigating Latency Variability of Latency-Critical Applications

Mia Primorac

A major theme of IT in the past decade has been the shift from on-premise hardware to cloud computing. Running a service in the public cloud is practical, because a large number of resources can be bought on-demand, but this shift comes with its own set of ...

EPFL2020

Network coded multipath and related techniques

Emre Telatar, Arno Schneuwly, Derya Malak

Techniques are disclosed for adaptive coding and scheduling of packets in wireless networks. The adaptive coding and scheduling can be achieved by utilizing a discrete water filling (DWF) scheme. In an example, a computer-implemented method to adaptively c ...

2020

ISI Sensitivity of PAM Signaling for Very High-Speed Short-Reach Copper Links

Yusuf Leblebici, Seyed Armin Tajalli, Firat Çelik, Ayça Akkaya

This paper presents a comparative study, analyzing the potentials of pulse amplitude modulation (PAM) for implementing next generation high-speed copper wireline links. This comparative study analyzes the sensitivities of PAM2, PAM4 and PAM8 to inter-symbo ...

IEEE2019

Multi-channel Time Encoding for Improved Reconstruction of Bandlimited Signals

Martin Vetterli, Adam James Scholefield, Karen Adam

Traditional sampling involves encoding a signal through (time, value)-pairs. In contrast, time encoding machines (TEMs) characterize a signal by recording time points which depend on the integral of the signal over time. We study multi-channel TEMs where c ...

2019

Page 1 of 3