Primary Rate Interface

The Primary Rate Interface (PRI) is a telecommunications interface standard used on an Integrated Services Digital Network (ISDN) for carrying multiple DS0 voice and data transmissions between the network and a user. PRI is the standard for providing telecommunication services to enterprises and offices. It is based on T-carrier (T1) transmission in the US, Canada, and Japan, while the E-carrier (E1) is common in Europe and Australia. The T1 line consists of 23 bearer (B) channels and one data (D) channel for control purposes, for a total bandwidth of 24x64-kbit/s or 1.544 Mbit/s. The E1 carrier provides 30 B- and one D-channel for a bandwidth of 2.048 Mbit/s. The first timeslot on the E1 is used for synchronization purposes and is not considered to be a B- or D-channel. The D-channel typically uses timeslot 16 on an E1, while it is timeslot 24 for a T1. Fewer active bearer channels, sometimes called user channels, may be used in fractional T1 or E1 services. The Integrated Services Digital Network (ISDN) prescribes two levels of service: Basic Rate Interface (BRI): one 16-kbit/s D channel with two 64-kbit/s B channels, intended for small enterprises and residential service. Primary Rate Interface (PRI): one 64-kbit/s D channel with 23 (1.544 Mbit/s T1, a.k.a. "23B + D") or 30 (2.048 Mbit/s E1, a.k.a. "30B + D") 64-kbit/s B channels, intended for large organizations. Each B-channel carries data, voice, and other services. The D-channel carries control and signaling information. Larger connections are possible using PRI pairing. A dual T1-PRI could have 24 + 23 = 47 B-channels and 1 D-channel (often called "47B + D"), but more commonly has 46 B-channels and 2 D-channels thus providing a backup signaling channel. The concept applies to E1s as well and both can include more than 2 PRIs. When configuring multiple T1's as ISDN-PRI's, it's possible to use NFAS (non-facility associated signaling) to enable one or two D-channels to support additional B-channels on separate T1 circuits.