The Falcon 9 first-stage landing tests were a series of controlled-descent flight tests conducted by SpaceX between 2013 and 2016. Since 2017, the first stage of Falcon 9 missions has been routinely landed if the rocket performance allowed it, and if SpaceX chose to recover the stage.
The program's objective was to reliably execute controlled re-entry, descent and landing (EDL) of the Falcon 9 first stage into Earth's atmosphere after the stage completes the boost phase of an orbital spaceflight. The first tests aimed to touch down vertically in the ocean at zero velocity. Later tests attempted to land the rocket precisely on an autonomous spaceport drone ship (a barge commissioned by SpaceX to provide a stable landing surface at sea) or at Landing Zone 1 (LZ-1), a concrete pad at Cape Canaveral. The first ground landing at LZ-1 succeeded in December 2015, and the first landing at sea on a drone ship in April 2016. The second landed booster, B1021, was the first to fly again in March 2017, and was recovered a second time.
The first landing test occurred in September 2013 on the sixth flight of a Falcon 9 and maiden launch of the v1.1 rocket version. From 2013 to 2016, sixteen test flights were conducted, six of which achieved a soft landing and recovery of the booster:
flight 20 (Orbcomm OG2 M2) safely touching down on the LZ-1 ground pad upon first attempt in December 2015;
flight 23 (CRS-8) finally achieving a stable landing at sea in the Atlantic on the drone ship Of Course I Still Love You in April 2016 after four previous attempts ended in destruction of the booster upon impact;
flights 24 (JCSAT-14) and 25 (Thaicom 8) returning at higher speed from GTO missions at sea on a drone ship in May 2016;
flight 27 (CRS-9) returning to LZ-1 in July 2016;
flight 28 (JCSAT-16) landing on a drone ship in August 2016;
Since the January 2017 return to flight, SpaceX has stopped referring to landing attempts as "experimental", indicating that they have become a routine procedure (see Iridium-1 and CRS-10 press kits of 2017, compared with CRS-9 and JCSAT-16 of 2016).
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
The objective of the course is to present with different viewpoints, the lessons learned which lead to the decisions in the space exploration and their consequences today and for the decades to come.
The student will learn state-of-the-art algorithms for solving differential equations. The analysis and implementation of these algorithms will be discussed in some detail.
The goal of this course is to introduce the student to modern numerical methods for the solution of coupled & non-linear problems arising in geo-mechanics / geotechnical engineering.
Falcon 9 flight 20 (also known as Orbcomm OG2 M2) was a Falcon 9 space launch that occurred on 22 December 2015 at 01:29:00 UTC (21 December, 8:29:00 pm local time). It was the first time that the first stage of an orbital rocket made a successful return and vertical landing. The successful landing of the first stage at Landing Zone 1, near the launch site, was the result of a five-year technology development program to develop a reusable launch system and came on a flight test that followed the primary launch mission.
Falcon 9 Full Thrust (also known as Falcon 9 v1.2, with variants Block 1 to Block 5) is a partially reusable medium-lift launch vehicle, designed and manufactured by SpaceX. Designed in 2014–2015, Falcon 9 Full Thrust began launch operations in December 2015. As of , Falcon 9 Full Thrust had performed launches without any failures. Based on the Lewis point estimate of reliability, this rocket is the most reliable orbital launch vehicle currently in operation.
An autonomous spaceport drone ship (ASDS) is an ocean-going vessel derived from a deck barge, outfitted with station-keeping engines and a large landing platform, and is autonomously positioned when on station for a landing. Construction of the drone ships was commissioned by aerospace company SpaceX to allow recovery of launch vehicle boosters at sea for missions that do not carry sufficient fuel to return to the launch site after boosting spacecraft onto an orbital or interplanetary trajectory.
Many future fusion devices will rely heavily, if not solely, on electron cyclotron (EC) heating subsystems to provide bulk heating, instability control (neoclassical tearing mode (NTM) stabilization), and thermal instability control. Efficient use of the i ...
E D P SCIENCES2023
, , ,
Intense winds are a challenge for vertical take-off and landing drones with wings. In particular, in the hovering regime, wings are sensitive to wind currents that can be detrimental to their operational and energetic performances. Tail-sitters are particu ...
Gyrotrons and High Voltage Power Supplies (HVPS) used on electron cyclotron (EC) systems are the source of large electromagnetic interference (EMI). Arcing events inside gyrotrons is the most frequently cited issue, but fast shutdown of a HVPS can produce ...