Nico de RooijNico de Rooij is Professor Emeritus of EPFL and previous Vice-President of CSEM SA. He was Professor of Microengineering at EPFL and Head of the Sensors, Actuators and Microsystems Laboratory (
SAMLAB
) from 2009 to 2016. At
CSEM SA
he was responsible for the EPFL CSEM coordination from 2012 to 2016. His research activities include the design, micro fabrication and application of miniaturized silicon based sensors, actuators, and microsystems. He authored and coauthored over 400 published
journal papers
in these areas.
He was Professor at the University of Neuchatel and Head of the Sensors, Actuators and Microsystems Laboratory (SAMLAB) from 1982 to 2008. Since October 1990 till October 1996 and again from October 2002 until June 2008, he has been the director of the Institute of Microtechnology of the University of Neuchatel (IMT UniNE). He lectured at the Swiss Federal Institute of Technology, Zurich (ETHZ), and since 1989, he has been a part-time professor at the Swiss Federal Institute of Technology, Lausanne (EPFL). He has been appointed Vice-President of the CSEM SA in February 2008 and headed the newly created Microsystems Technology Division of CSEM SA, from 2008 until 2012. He was Director of EPFL's Institute of Microengineering (EPFL STI IMT) from 2009 to 2012, following the transfer of IMT Uni-NE to EPFL.
Dr. de Rooij is a Fellow of the IEEE and Fellow of the Institute of Physics (UK). He recieved the IEEE
Jun-Ichi Nishizawa Gold Medal
, the Schlumberger Prize as well as the
MNE Fellow Award 2016
. He was awarded a Visiting Investigatorship Program (VIP) in MEMS/NEMS Systems by the
A*STAR Science and Engineering Council (SERC)
, Singapore, hosted by
SIMTech
, for the period 2005-2008.
Prof. de Rooij is Corresponding Member of the
Royal Netherlands Academy of Arts and Sciences
and Individual Member of the
Swiss Academy of Engineering Sciences
.
He has been serving on the Editorial Boards of the
IEEE/ASME Journal of Microelectromechanical Systems (IEEE JMEMS)
,
the IEEE proceedings
,
the Journal of Micromechanics and Microengineering, JM & M,
,
the Sensors and Actuators
,and
Sensors and Materials
. He was Member of the Information and Communication technology jury of the BBVA Foundation Frontiers of Knowledge Awards from 2009 to 2012.
Dr. de Rooij is (or was) Member of numerous international steering committees of conference series as well as
technical paper review panels including the steering committee of the International Conference on Solid-State
Sensors and Actuators and of Eurosensors. He acted as European Program Chairman of Transducers '87 and General Chairman of Transducers '89, Montreux, Switzerland.
He has supervised more than 70 Ph.D. students, who have successfully completed their
Ph.D. thesis.
He received his M.Sc. degree in physical chemistry from the State University of Utrecht, The Netherlands, in 1975, and a Ph.D. degree from Twente University of Technology, The Netherlands, in 1978. From 1978 to 1982, he worked at the Research and Development Department of Cordis Europa N.V., The Netherlands.
Jan Van HerleBorn in Antwerp, Belgium. In Switzerland since 1983. Became Swiss citizen in 2004 out of conviction of principles of democracy and bottom-up participation. No double nationality. Village Council Member for 2 five-year mandates in 2006-2016.
1987 : Chemist from Basel University (CH).
1988 : Post-graduate IT diploma from Basel Engineering School.
1989 : Industry internship ABB Baden (CH).
1990-1993 : PhD Thesis EPFL, on Solid Oxide Fuel Cell cathode reaction mechanisms.
1994-1995 : Japanese Postdoctoral Fellowship in Tsukuba, Japan, on ceramic powders.
1995-2000 : Researcher at EPFL, Dpt. Chemistry : project responsible in PPM2 (materials), FP4-BriteEuram, NEDO (Japan), Swiss Gas Union (CH, oxygen membranes).
1998-2000 : Masters in Energy Technology, EPFL.
2000 : Cofounder of HTceramix SA (EPFL spin-off), now based in Yverdon (14 employees). Taken over by SOLIDpower in 2007, now 250 employees with 70 MCHF raised.
2000 : 1st Assistant and lecturer at LENI (STI-IGM) : fuel cell group responsible, projects on biogas (Federal Energy Office), woodgas (CCEM), fuel cell stacking (CTI, FP6, FNS), ceramic separation membranes (COST, FNS), microtubes (STI Seed), stability/lifetime/reliability in fuel cells (Electricité de France, swisselectric research). Currently 4 Ph D theses ongoing, 14 theses concluded, of which 5 colateral with SB and IMX. M.E.R. since Nov 2008.
Total funding raised so far >18 MCHF (50% as main applicant; 30% outside CH; 20% industry).
Scientific output : >135 peer-reviewed publications, >120 conference papers, 40 invited presentations (8 keynotes), >70 granted proposals.
Fluent in 5 languages (Dutch, French, German ( Swiss-german), English, Spanish).
Philippe SpätigPhilippe Spätig is currently Adjunct Professor at EPFL in the School of Basic Sciences, in the Laboratory of Reactor Physics and Systems Behaviours. He obtained his diploma of Engineer Physicist at EPFL in 1991 and his PhD at EPFL in 1995 on the role of thermal activation in the plasticity of the intermetallic Ni3Al. From 1995 to 1997, he worked as postdoc in the Materials Group of the Center for Research in Plasma Physics at EPFL, studying the effects of high-energy proton irradiation on alloys and pure metals. He then moved to the University of California Santa Barbara and spent two years in the group of Professor G.R. Odette, working on fracture mechanics of ferritic structural steels. He joined again the Materials Group of the Center for Research in Plasma Physics at EPFL in 2000 and worked in this group until the end of 2012. His research was focused on irradiation hardening and embrittlement of steels, as well as on the development of oxide dispersion strengthened steels. He also worked and developed experimental and analytical small specimen test techniques to reliably extract mechanical properties from limited material volume. In 2013, he joined the Laboratory for Nuclear Materials at Paul Scherrer Institute, while being associated with the Laboratory for Reactor Physics and System Behaviours at EPFL. Since then he mainly works on environmentally-assisted fatigue and fracture on austenitic and pressure vessel steels, where the effects of light water reactor environment on mechanical properties are investigated.
John Christopher PlummerÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL), Lausanne, Switzerland 1989-
Collaborateur Scientifique/Chargé de Cours (Lecturer) (1998-)
Privat Docent (1998)
Laboratoire de Technologie des Composites et Polymères (LTC) (2000-)
Laboratoire de Polymères (LP) (1998-2000)
UNIVERSITY OF MICHIGAN (UMICH), Ann Arbor, MI, USA 1995-1996
Visiting Scientist, Department of Materials Science and Engineering (DMSE)
UNIVERSITY OF CAMBRIDGE, Cambridge, UK 1986-1989
Research Assistant, Physics and Chemistry of Solids Group (PCS), Department of Physics
UNIVERSITY OF CAMBRIDGE, Cambridge, UK, Department of Materials 1986
PhD, "Flux Pinning in Type-II Superconductors"
UNIVERSITY OF CAMBRIDGE, Cambridge, UK, 1982
BA/MA Honours Degree in Natural Sciences
Awards
Prix R&R Haenny, 2007, DuPont Research Award, 2003, Commendation, British Polymer Group, Reading 1989
RECENT PUBLICATIONS
Ramier J, Da Costa N, Plummer CJG, Leterrier Y, Manson JAE, Eckert R, Gaudiana R, Cohesion and adhesion of nanoporous TiO2 coatings on titanium wires for photovoltaic applications, Thin solid films, 516, 1913 (2008).
Ramier J, Plummer CJG, Leterrier Y, Manson JAE, Eckert B, Gaudiana R, Mechanical integrity of dye-sensitized photovoltaic fibers, Renewable energy, 33, 314 (2008).
- Houphouet-Boigny C, Plummer CJG, Wakeman MD, Manson JAE, Hybrid glass fiber-reinforced thermoplastic nanocomposites, J. Thermoplast. Comp. Mater., 21, 103 (2008).
Ternat C, Ouali L, Sommer H, Fieber W, Velazco MI, Plummer CJG, Kreutzer G, Klok HA, Manson JAE, Herrmann, Investigation of the Release of Bioactive Volatiles from Amphiphilic Multiarm Star-Block Copolymers by Thermogravimetry and Dynamic Headspace Analysis, Macromolecules 41(19), 7079 (2008).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Mechanical properties of highly filled latex-based polystyrene/laponite nanocomposites, Solid State Phenomena Vol. 151, 30 (2009).
Plummer, CJG, Dalle Vacche, S, Houphouët-Boigny, C, Michaud, V, Månson, JAE, Hybrid Glass Mat Reinforced Polypropylene-Montmorillonite Nanocomposites, Solid State Phenomena Vol. 151, 60 (2009).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Highly filled polystyrenelaponite nanocomposites prepared by emulsion polymerization, European Polm. J. 45, 621 (2009).
Ruggerone, R., Plummer, C.J.G., Negrete Herrera, N., Bourgeat-Lami, E., Månson, J-EA, Fracture mechanisms in polystyrene/laponite nanocomposites prepared by emulsion polymerization, Engineering Fracture Mechanics 76, 2846 (2009)
Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G. Adsorption of low-molecular-weight molecules on the surface of a sodium smectite clay: an ab initio study, Journal of Physical Chemistry C 113, 12293 (2009).
Clausen P., Andreoni W., Curioni A., Hughs E., Plummer C.J.G., Water adsorption on a sodium smectite clay surface: an ab initio study, Journal of Physical Chemistry C 113, 15218 (2009).
Molberg, M, Leterrier, Y., Plummer, C.J.G., Walder, C., Löwe, C., Opris, D.M., Nüesch, F.A., Bauer, S., Månson, J.-A.E., Frequency dependent dielectric and mechanical behaviour of elastomers for actuator applications, J. Appl. Phys. 106, 054112 (2009)
Clausen P., Signorelli M., Schreiber A., Hughes E., Plummer CJG, Fessas D., Schiraldi A., Månson E. J.-A., Equilibrium desorption isotherms of water, ethanol, ethyl acetate and toluene on a sodium smectite clay, Journal of Thermal Analysis and Calorimetry 98, 833 (2009)
Micusik, M., Bonnefond, A., Reyes, Y., Bogner, A., Chazeau, L., Plummer, C.J.G., Paulis, M., Leiza, J.R., Morphology of Polymer/Clay Latex Particles Synthesized by Miniemulsion Polymerization: Modeling and Experimental Results Macromol. React. Eng. 2010, 4, 432 (2010).
Houphouet-Boigny C., Plummer CJG, Vacche SD, Michaud V, Wakeman MD, Månson E. J.-A., Hybrid Glass Mat-reinforced Polypropylene-Montmorillonite Nanocomposites, J. Comp. Mater. 44, 1975 (2010).
Delabarde, C., Plummer C.J.G., Bourban, P.-E., Månson E. J.-A., Solidification behavior of PLLA/nHA nanocomposites, Comp. Sci. & Tech. 70, 1813 (2010).
Plummer C.J.G., Ruggerone R., Negrete-Herrera N., Bourgeat-Lami E., Månson J.-A.E., Small Strain Mechanical Properties of Latex-Based Nanocomposite Films, Macromol. Symp. 294, 1 (2010).
Dalle Vacche, S., Plummer C.J.G., Houphouet-Boigny C., Månson E. J.-A., Morphology and mechanical properties of isotactic polypropylene glass mat thermoplastic composites modified with organophilic montmorillonite, J Mater Sci 46, 2112 (2011). Pierre-Etienne BourbanBackground 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
