Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A simplified model describing the polarisation characteristics of spun fibres is proposed, aiming at determining how close to a circularly birefringent medium such a fibre is. This is of crucial importance regarding the interest of such a medium for magnet ...
In this work, the influence of ply thickness on strain energy release rate (ERR) in delamination of carbon epoxy laminates is addressed. Specimens with three ply thicknesses: 0.030, 0.075 and 0.150 mm are tested. While the ERR at onset of crack propagation ...
The mechanical and damping properties were measured for unidirectional, 0/90 and twill 2/2 flax fibre (FF) composites containing 40 vol% of fibres in an epoxy matrix. All composites were processed by resin transfer moulding. The influence of the impregnati ...
Thin-ply composites are rapidly gaining interest in the composite industry, not only because of the larger design possibilities that they offer, but also because of positive size effects that have been shown to improve performance in various loading condit ...
The demand for carbon/epoxy laminated composites is continuously increasing due to their high specific modulus and strength. Among them, laminates made of particularly thin layers (from t=0.015 to 0.150 mm) and called thin-ply composites are gaining in int ...
