Paul XirouchakisPaul Xirouchakis obtained his diplôme in mechanical and electrical engineering at the National Technical University of Athens, Greece in 1971. He continued his education at the Ecole Nationale Superieure de Techniques Avancées, in Paris, France where he obtained his diplôme dIngénieur de lE.N.S.T.A. et dIngénieur civil du Génie Maritime in 1973. He obtained his PhD degree in Structural Mechanics from the Massachusetts Institute of Technology in 1978. He was appointed thereafter assistant and later associate professor at Massachusetts Institute of Technology (1978-1985). Subsequently he was nominated associate professor at the National Technical University in Athens (1985-1987). After about eight years working in the industry with JJMA, Arlington, Virginia (in parallel he also obtained a PhD degree in Information Technology, in 1992 from George Mason University) he was nominated at EPFL professor of computer-aided design and manufacturing since July 1995. At EPFL he teaches design for X at the bachelors level, computer-aided manufacturing and multi-body dynamics simulation at the masters level and manufacturing information systems at the doctoral level. His research covers the development of methods and computer tools for the (sustainable) product design and manufacturing. Current research projects deal with the development of method and tools for resource efficient part manufacturing, chatter-free part programming, development of a virtual multi-body dynamics machine tool environment and composites drilling programming.
Ralf SeifertRalf W. Seifert is Professor of Technology & Operations Management (TOM) at the College of Management of Technology (CDM) at Ecole Polytechnique Fédérale de Lausanne (EPFL) since 2003. His primary research and teaching interests relate to operations management, supply chain strategy and technology network management. He is also active in industry analysis, international project work and new venture formation.
Based on his work with companies, Professor Seifert has co-authored more than 30 case studies covering different industries. These efforts have been recognized by multiple international case awards granted by EFMD in 2018, 2012, 2009 and 2003, ECCH in 2011 and 2006, as well as POMS in 2004. He continues to actively research issues of supply chain strategy, supply chain finance and technology management and has more than 70 articles and international conference presentations to his credit. In addition, he co-authored two books: one focused on strategic supply chain management and another one concerning start-up challenges of technology ventures.
In parallel to his appointment at EPFL, he continues to serve a position at IMD, were he has been appointed Professor of Operations Management in 2000. Prior to joining IMD, Professor Seifert studied and worked in Germany, Japan and the US. He earned PhD and MS degrees in Management Science at Stanford University, a Diplom Ingenieur degree in Mechanical Engineering at the Karlsruhe Institute of Technology (KIT) and a Master's degree in Integrated Manufacturing Systems Engineering from North Carolina State University. While in the US, he consulted for Hewlett-Packard and served as Teaching and Research Assistant at Stanford University. In Germany he worked for Booz & Company, McKinsey & Company and Freudenberg & Co. In addition, he spent one year as a Visiting Scholar in Operations Research at Waseda University in Tokyo.
Boi FaltingsProfessor Faltings joined EPFL in 1987 as professor of Artificial Intelligence. He holds a PhD degree from the University of Illinois at Urbana-Champaign, and a diploma from the ETHZ. His research has spanned different areas of intelligent systems linked to model-based reasoning. In particular, he has contributed to qualitative spatial reasoning, case-based reasoning (especially for design problems), constraint satisfaction for design and logistics problems, multi-agent systems, and intelligent user interfaces. His current work is oriented towards multi-agent systems and social computing, using concepts of game theory, constraint optimization and machine learning. In 1999, Professor Faltings co-founded Iconomic Systems, a company that developed a new agent-based paradigm for travel e-commerce. He has since co-founded 5 other startup companies and advised several others. Prof. Faltings has published more than 150 refereed papers on his work, and participates regularly in program committees of all major conferences in the field. He has served as associate editor of of the major journals, including the Journal of Artificial Intelligence Research (JAIR) and the Artificial Intelligence Journal. From 1996 to 1998, he served as head of the computer science department.
Rémy GlardonREMY GLARDON is Professor at the Swiss Federal Institute of Technology at Lausanne. He is the founder and director of the Laboratory for Production Management and Processes. He owns a Master in Mechanical Engineering and a PhD in Materials Science from the Swiss Federal Institute of Technology at Lausanne. After his graduate study at EPFL, he spent several years as a postdoc at UC-Berkeley where he published several research papers on the mechanical behavior and wear of materials. He then moved to industry and occupied several management positions in production, logistics and operations management. Before joining EPFL in Sept. 1995 to found the Laboratory for Production Management & Processes, he was Operations Manager and member of the board of an international high tech. company. His main research interests are currently related to the design, configuration and strategic, tactical & operational management of value adding networks. His research activities concern more specifically, the integration of human aspects in the modeling & simulation of these complex systems. Rémy Glardon has initiated and completed several research and consulting projects with private companies in these areas, aiming at improving the cost/performance ratio in operations management. He is also co-founder of two start-up consulting enterprises in the field of supply chain and operations management.
Dimitrios KyritsisResearch
? Computer Aided Process Planning for Manufacture, Assembly, Disassembly,
? Petri- net modeling with applications in Manufacturing,
? Closed-loop Product Lifecycle Management (PLM) using Product Embedded Information Devices (PEID),
? Engineering Asset Management,
? Ontology-Based Engineering.
Membership and Services in Professional Organizations
? Chair of IFIP-WG5.7 - Advance Production Management Systems, member since 2005
? Member of ASME since 1993
? Vice President/Secretary of ASME International Swiss Chapter, 1995-2006
? Member of the Board of MANUFUTURE-CH
? Founding Member of the new IFAC TC5.1 WG IFAC WG Advanced Maintenance Engineering, Services and Technology
? Founding member of the Hellenic Maintenance Society since 2007
? Founding member of the International Society of Engineering Asset Management (ISEAM) since 2007
Services in EPFL Committees
? Member of the Informatics Committee of DGM: 1999-2001
? Member of the Doctoral Program Committee of the Doctoral Program: Manufacturing Systems and Robotics, since 2002
? Member of the CCE (Conference du Coprs des Enseignants) of EPFL since 2007
Services in other Universities
? Member of the Administration Board of INP GI, the Industrial Engineering School of INP Grenoble, elected as Qualified External Personality, 2008-2013 and 2013-2016
? Invited professor at the University of Technology of Compiègne, France
? Invited professor at the University of Technology of Belfort-Montbéliard, France
? Invited professor at the Paris-Tech, ENSAM, France
? Guest professor at the University of Cincinnati, USA
Services at the European Commission
? Member of the Advisory Group LEIT-NMBP
Services in International Research activities
? Referee of the international scientific journals CAD, Computers In Industry, Production Planning and Control and others as well as ASME and IEEE conferences, 1994 - today.
? Guest Editor of the special issue on CAPP of the international scientific journal Advances in Engineering Software, 25, 1996.
? Member of the Editorial Board of the international scientific journal Advances in Engineering Software, 1996-today.
? Project Technical Advisor of two BRITE/EURAM-CRAFT projects in the field of CAD/CAM, 1995-1997.
? Evaluator of BRITE/EURAM projects (November 1997 evaluation).
? Invited expert at the IMS Workshop, EC, February 2002.
? Evaluator of FP6-NMP-IP projects (April 2003 evaluation).
? Invited expert at MANUFUTURE 2003.
? Evaluator of NEST projects (2005)
? Invited expert at IMS-NoE FP7 Roadmap Workshops on manufacturing organised by the European Commission.
? Invited expert at MANUFUTURE-CH, 2005-today.
? Invited expert at MIT RFID Academic Convocation, 2006.
? Founding member of the International Working Group on PLM, 2007- .
? Reviewer of EPSRC program proposals, UK, 2008.
? Reviewer of the National UK Research Prorgam IMRC, 2008.
? Reviewer of the National Greek Research Program Competitiveness-Enterpeneurship, 2009.
Organisation of Conferences
? Organiser and chairman of two technical sessions on CAPP, in the 1994 ASME International Computers in Engineering Conference, Minneapolis, USA, 11- 14 September 1994.
? Member of the Organizing Committee of the International Symposium for Electromachining-ISEM-XI, held in Lausanne, Switzerland, April 17-21, 1995. Also co-editor of the Conference Proceedings.
? Program co-chairman and member of the Organizing Committee of the First International Workshop on Intelligent Manufacturing Systems [IMS-EUROPE 1998], held in Lausanne, Switzerland, April 15-17, 1998. Also co-editor of the Conference Proceedings.
? Member of the National Organizing Committee of the 16th IMACS WORLD CONGRESS 2000 on Scientific Computation, Applied Mathematics and Simulation, Lausanne, Switzerland, August 21-25, 2000.
? General Secretary of the International Symposium TMCE 2004, April 13-17, 2004, Lausanne, Switzerland.
? Member of the International Advisory Committee of the international conference IMS-Forum 2004, Como, Italy, May 2004.
? Organiser and chairman of two sessions (SIG5), IMS-Forum 2004, Como, Italy, May 2004.
? Organiser and chairman of a session at INCOM 2006, May 2006, Saint-Etienne, France.
? Member of the International Program Committee of the international congress WCEAM 2006, July 2006, Brisbane, Australia.
? Member of the Program Committee of the international conference ASI 2006, September 2006, Kassel, Germany.
? Member of the Technical Programme Committee of the international conference APMS 2006 (IFIP-WG5.7), September 2006, Wroclaw, Poland.
? Member of the International Program Committee of the international congress WCEAM 2007, April 2007, Harrogate, UK.
? Member of the International Program Committee of the international conference EURASIP 2007.
? Member of the International Program Committee of the international conference PLM 2007, July 2007, Milan, Italy.
? Organiser and chairman of the session on Sustainable Manufacturing of the Internationla IMS workshop, November 2007, Zürich, Switzerland.
? General Chair of the 1st IMS MTP Workshop, April 2008, Bern, Switzerland.
? Member of the International Program Committee of the international conference EURASIP 2008.
? Member of the International Program Committee of the international conference PLM 2008, July 2008, Seoul, South Korea.
? General Chair of the 2nd IMS MTP Workshop, October 2008, Montreux, Switzerland.
? Member of the International Program Committee of the international congress WCEAM 2008, October 2008, Beijing, China.
? Program Chair & Coordinator of the IMS World Congress: Engineering a Sustainable Future, November 2009, Geneva, Switzerland.
? Congress Chair of the the international congress WCEAM 2009, 28-30 September 2009, Athens, Greece (www.wceam.com).