Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Michel RappazAfter a PhD in solid state physics (1978) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and a post-doc at Oak Ridge National Laboratory, Michel Rappaz joined the Institute of Materials of EPFL in 1981. After two years in an engineering company, he came back to EPFL in 1984 where he was nominated Adjunct Professor in 1990 and Full Professor in 2003. He retired from EPFL in 2015 and is now Emeritus Professor and independent consultant for several industries and research centres.
His main interests are in phase transformations and solidification, in particular the coupling of macroscopic aspects of heat and mass transfer with microscopic aspects of microstructure and defect formation. Among his diverse achievements, one can mention in particular the development of cellular automata for grain structure predictions and of granular models for hot tearing formation in castings, the coupling of Finite Element method with microscopic models of nucleation and growth, the application of the phase field method to the understanding of various microstructures, the discovery of quasicrystal mediated-nucleation in alloys, and many other studies both fundamental at the microstructure-defect level and more applied at the level of processes.
Some of the software developments have been commercialized by a spin-off company founded by his group in 1991 (Calcom SA), now part of the French company ESI. Michel Rappaz initiated in 1992 an annual postgraduate course on solidification which has been attended by more than 900 participants from all over the world. He is presently collaborating closely with another spin-off company started from his group, Novamet SàrL.
Michel Rappaz has received several awards, in particular the Mathewson co-author award (1994) and author award (1997) of the American Mineral, Metals and Materials Society (TMS), the Koerber foundation award jointly with Profs Y. Bréchet and M. Asbby (1996), the Sainte-Claire Deville Medal (1996) and the Grand Medal (2011) from the French Materials Society, the Bruce Chalmers Award of TMS (2002), the Mc Donald Memorial Lecture award of Canada (2005), the FEMS European Materials Gold Medal (2013) and the Brimacombe Prize of TMS (2015). He is a highly-cited author of ISI, a fellow of ASM, IOP and TMS, and has co-authored more than 200 publications and two books.
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Roland LogéRoland Logé is an associate professor at EPFL, with a primary affiliation to the Materials Institute, and a secondary affiliation to the Microengineering Institute.
After graduating in 1994 at UCL (Belgium) in Materials Engineering, he earned a Master of Science in Mechanics in 1995, at UCSB Santa Barbara (USA). He received his PhD at Mines Paristech-CEMEF (France) in 1999, where he specialized in metal forming and associated microstructure evolutions. After a postdoc at Cornell University (USA) between 1999 and 2001, he entered CNRS in France.
In 2008, he was awarded the ALCAN prize from the French Academy of Sciences, together with Yvan Chastel.
In 2009 he became head of the Metallurgy-Structure-Rheology research group at CEMEF.
In 2011, he launched a “Groupement de Recherche” (GDR), funded by CNRS, networking most of the researchers in France involved in recrystallization and grain growth.
In 2013, he became Research Director at CNRS.
In March 2014 he joined EPFL as the head of the Laboratory of Thermomechanical Metallurgy.
Cyril Cayron1992-1995 Engineering School. Ecole des Mines de Nancy.
1994-1995 Master's degree in Materials Science (rank = 1st)
1995-1996 Military Service
1996-2000 PhD at EPFL-CIME. Precipitation in 6xxx alloys and composites.
2000-2014 Researcher, Engineer and Group leader on materials for new energies at CEA-Grenoble, France.
2012 Habilitation to supervise researches (HDR)
2014-now Senior Scientist at EPFL-LMTM
Creator of the computer programs GenOVa and ARPGE (in Python).
I currently work on crystallographic models of martensitic transformations and deformation twinning.
Philippe BuffatBorn in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
Philippe SpätigPhilippe Spätig is currently Adjunct Professor at EPFL in the School of Basic Sciences, in the Laboratory of Reactor Physics and Systems Behaviours. He obtained his diploma of Engineer Physicist at EPFL in 1991 and his PhD at EPFL in 1995 on the role of thermal activation in the plasticity of the intermetallic Ni3Al. From 1995 to 1997, he worked as postdoc in the Materials Group of the Center for Research in Plasma Physics at EPFL, studying the effects of high-energy proton irradiation on alloys and pure metals. He then moved to the University of California Santa Barbara and spent two years in the group of Professor G.R. Odette, working on fracture mechanics of ferritic structural steels. He joined again the Materials Group of the Center for Research in Plasma Physics at EPFL in 2000 and worked in this group until the end of 2012. His research was focused on irradiation hardening and embrittlement of steels, as well as on the development of oxide dispersion strengthened steels. He also worked and developed experimental and analytical small specimen test techniques to reliably extract mechanical properties from limited material volume. In 2013, he joined the Laboratory for Nuclear Materials at Paul Scherrer Institute, while being associated with the Laboratory for Reactor Physics and System Behaviours at EPFL. Since then he mainly works on environmentally-assisted fatigue and fracture on austenitic and pressure vessel steels, where the effects of light water reactor environment on mechanical properties are investigated.
Anirudh Raju NatarajanAnirudh received a B.Tech. in Metallurgical and Materials Engineering from the Indian Institute of Technology, Madras, a M.S in Materials Science and Engineering from the University of Michigan, Ann Arbor and a Ph.D. in Materials from the University of California, Santa Barbara. He set up the laboratory of materials design and simulation (MADES) at EPFL in 2022. His research interests are in the computational design and discovery of advanced engineering materials.