Concept
Induction heating
Related people (37)
Ambrogio Fasoli
Ambrogio FASOLI was born on November 10, 1964, in Milano, Italy. After a classical high school diploma (Maturità Classica) and graduation from the University of Milano, with the degree of Dottore in Fisica, he obtained his Phd at the Ecole Polytechnique Fédérale (EPFL) with a thesis on chaos in wave-particle interactions in plasmas, which was awarded the Best EPFL Thesis prize, in 1993. He then moved to the JET Joint Undertaking, the largest worlds fusion device, near Oxford, UK, to investigate Alfvén waves and burning plasma physics. In 1995-1996 he took a sabbatical leave, visiting several Universities and Research Institutes in Europe and in the USA, including three months at General Atomics in San Diego. In 1996-1997, during a second period at JET, he participated in the fusion power worlds record experiments in Deuterium-Tritium plasmas at JET. In 1997 he was nominated Assistant Professor in MIT Physics Department, where he led a basic plasma physics group and the international collaboration between MIT and JET. In 2001 Ambrogio FASOLI was nominated Assistant Professor of Physics at EPFL, Lausanne, Switzerland, and Professeur Boursier of the Swiss National Science Foundation. He became member of CRPP Directorate and took the leadership of CRPP basic plasma physics group and of the TCV tokamak, one of the major fusion experiments worldwide. At European level he was scientific coordinator for JET experiments, spokesperson for multi-machine experiments in the frame of International Tokamak Physics Activities, and Project Leader for a JET Enhancement project. In 2005 he became Associate Professor of Physics with tenure at EPFL, then member of EFDA Science and Technology Advisory Committee, and of the Steering Committee of the Association EURATOM-Swiss Confederation. From 2006 he was also Deputy Director, then from 2007 Executive Director of CRPP and from 2008 Full Professor of Physics at EPFL. For a number of years he was the Chair of the EPFL Physics Strategic Committee and a member of the Directorate of the EPFL School of Sciences. Since the summer of 2014 Professor FASOLI was the sole Director of CRPP. He now represents Switzerland in the EUROfusion General Assembly and Bureau, and in the Governing Board for Fusion for Energy. He is member of the EUROfusion DEMO project Board, of the Scientific Board of the Helmotz Virtual Institute on Advanced Microwave Diagnostics, of the European Delegation for the Cooperation between Euratom and the Government of India in Fusion Energy Research, of the European Consortium for the development of the ITER gyratron (EGYC), and participates to numerous international review panels. He chairs the FuseNet Academic Council, the International Advisory Panel for the Laboratory of Excellence Plas@Par in the Sorbonne Universities, the European Consortium for the construction of the ITER microwave Upper Launcher (ECHUL), and the Promotion Committee of the EPFL Faculty of Basic Sciences. He is one the three European representatives in the International Tokamak Physics Activities Coordinating Committee, advising ITER, and the Editor-in-Chief of the IAEA journal Nuclear Fusion. Since January 2019, Ambrogio Fasoli is the Chair of the General Assembly, i.e. the president of EUROfusion, the European Consortium for Development of Fusion Energy. Professor FASOLI is a Fellow of the American Physical Society and since 2001 a Visiting Professor at MIT Physics Department. He is the Director of the Swiss Plasma Center.
Yves Perriard
Yves Perriard was born in Lausanne in 1965. He received the M. Sc. in Microengineering from the Swiss Federal Institute of Technology - Lausanne (EPFL) in 1989 and the Ph D. degree in 1992. Co-founder of Micro-Beam SA, he was CEO of this company involved in high precision electric drive. Senior lecturer from 1998 and professor since 2003, he is currently director of Laboratory of Integrated Actuators. His research interests are in the field of new actuator design and associated electronic devices. In 2009, he is appointed Vice-Director of the Microengineering Institute in Neuchâtel until 2011. In 2013 the Federal Council has named him the the CTI commission in Bern. In 2014 he is appointed guest professor at Zhejiang University in China. In 2017, the lab is granted by the Werner Siemens Foundation of an amount of 12 millions CHF in order to set up a new Center for Artificial Muscules. Since 2018, he is Expert with Innosuisse, the new Swiss Innovation Agency. http://scholar.google.com/citations?hl=fr&user=V2onuO8AAAAJ https://actu.epfl.ch/news/a-12-million-franc-donation-to-create-a-center-for/
François Maréchal
Ph D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.