Wi-Fi | EPFL Graph Search

Wi-Fi (ˈwaɪfaɪ) is a family of wireless network protocols based on the IEEE 802.11 family of standards, which are commonly used for local area networking of devices and Internet access, allowing nearby digital devices to exchange data by radio waves. These are the most widely used computer networks in the world, used globally in home and small office networks to link devices together and to a wireless router to connect them to the Internet, and in wireless access points in public places like coffee shops, hotels, libraries, and airports to provide visitors with Internet connectivity for their mobile devices. Wi-Fi is a trademark of the Wi-Fi Alliance, which restricts the use of the term "Wi-Fi Certified" to products that successfully complete interoperability certification testing. the Wi-Fi Alliance consisted of more than 800 companies from around the world. over 3.05 billion Wi-Fi-enabled devices are shipped globally each year. Wi-Fi uses multiple p

Content Management in Mobile Wireless Networks

Francisco De Meneses Neves Ramos Dos Santos

Approximately one billion users have access to mobile broadband, through which they intend to obtain the same data they can reach using a wired connection. Because of the cost of transmitting data over a mobile-broadband connection and given that 3G networks are quickly reaching their data-transfer capacity, some researchers envision the inter-connection of mobile devices using Wi-Fi, forming a challenged network. Such networks suffer from high latency, low data rates, and frequent disconnections; because end to end paths between pairs of nodes may not always exist, a mobile device must store content before delivering it to the intended receivers. We designed the content-optimal delivery algorithm (CODA) for distributing named data over a delay-tolerant network (DTN), which is a network of challenged networks. Current content-dissemination techniques for DTNs consist mainly of the following items: a content store, for caching and indexing retrieved content, and a query and response mechanism to search the network for matching content. Some algorithms attempt to optimize an objective function, such as the total delivery-delay. While disseminating content, CODA maximizes the network throughput by computing the utility of each item published: a device with a full buffer drops content in order of increasing utility and transmits content in order de- creasing utility. We implemented CODA over the CCNx protocol, which provides the basic tools for querying, caching, and transmitting content.

2012

Modeling and Measuring Performance of Data Dissemination in Opportunistic Networks

Nikodin Ristanovic

In this thesis we focus on understanding, measuring and describing the performance of Opportunistic Networks (ONs) and their applications. An “opportunistic network” is a term introduced to describe a sparse, wireless, ad hoc network with highly mobile nodes. The opportunistic networking paradigm deviates from the traditional end-to-end connectivity concept: Forwarding is based on intermittent connectivity between mobile nodes (typically, users with wireless devices); complete routes between sources and destinations rarely exist. Due to this unique property of spontaneous link establishment, the challenges that exist in ONs are specific. The unstructured nature of these networks makes it difficult to give any performance guarantees on data dissemination. For this reason, in Part I of this thesis we explore the dynamics that affect the performance of opportunistic networks. We choose a number of meaningful scenarios where our models and algorithms can be validated using large and credible data sets. We show that a drift and jump model that takes a spatial approach succeeds in capturing the impact of infrastructure and mobile-to-mobile exchanges on an opportunistic content update system. We describe the effects of these dynamics by using the age distribution of a dynamic piece of data (i.e., information updates) as the performance measure. The model also succeeds in capturing a strong bias in user mobility and reveals the existence of regions, whose statistics play a critical role in the performance perceived in the network. We exploit these findings to design an application for greedy infrastructure placement, which relies on the model approximation for a large number of nodes. Another great challenge of opportunistic networking lies in the fact that the bandwidth available on wireless links, coupled with ad hoc networking, failed to rival the capacity of backbones and to establish opportunistic networks as an alternative to infrastructure-based networks. For this reason, we never study ONs in an isolated context. Instead, we consider the applications that leverage interconnection between opportunistic networks and legacy networks and we study the benefits this synergy brings to both. Following this approach, we use a large operator-provided data set to show that opportunistic networks (based on Wi-Fi) are capable of offloading a significant amount of traffic from 3G networks. At the same time, the offloading algorithms we propose reduce the amount of energy consumed by mobiles, while requiring Wi-Fi coverage that is several times smaller than in the case of real-time offloading. Again we confirm and reuse the fact that user mobility is biased towards certain regions of the network. In Part II of this thesis, we treat another issue that is essential for the acceptance and evolution of opportunistic networks and their applications. Namely, we address the absence of experimental results that would support the findings of simulation based studies. Although the techniques such as contact-based simulations should intuitively be able to capture the performance of opportunistic applications, this intuition has little evidence in practice. For this reason, we design and deploy an experiment with real users who use an opportunistic Twitter application, in a way that allows them to maintain communication with legacy networks (i.e., cellular networks, the Internet). The experiment gives us a unique insight into certain performance aspects that are typically hidden or misinterpreted when the usual evaluation techniques (such as simulation) are used. We show that, due to the commonly ignored factors (such as the limited transmission bandwidth), contact-based simulations significantly overestimate delivery ratio and obtain delays that are several times lower than those experimentally acquired. In addition to this, our results unanimously show that the common practice of assuming infinite cache sizes in simulation studies, leads to a misinterpretation of the effects of a backbone on an opportunistic network. Such simulations typically overestimate the performance of the opportunistic component, while underestimating the utility of the backbone. Given the discovered deficiencies of the contact-based simulations, we consider an alternative statistical treatment of contact traces that uses the weighted contact graph. We show that this approach offers a better interpretation of the impact of a backbone on an opportunistic network and results in a closer match when it comes to modeling certain aspects of performance (namely, delivery ratio). Finally, the security requirements for the opportunistic applications that involve an interconnection with legacy networks are also highly specific. They cannot be fully addressed by the solutions proposed in the context of autonomous opportunistic (or ad hoc) networks, nor by the security frameworks used for securing the applications with continuous connectivity. Thus, in Part III of this thesis, we put together a security framework that fits the networks and applications that we target (i.e., the opportunistic networks and applications with occasional Internet connectivity). We then focus on the impact of security print on network performance and design a scheme for the protection of optimal relaying capacity in an opportunistic multihop network. We fine-tune the parameters of our scheme by using a game-theoretic approach and we demonstrate the substantial performance gains provided by the scheme.

EPFL2012

Reliability Mechanisms for Controllers in Real-Time Cyber-Physical Systems

Maaz Mashood Mohiuddin

Cyber-physical systems (CPSs) are real-world processes that are controlled by computer algorithms. We consider CPSs where a centralized, software-based controller maintains the process in a desired state by exchanging measurements and setpoints with process agents (PAs). As CPSs control processes with low-inertia, e.g., electric grids and autonomous cars, the controller needs to satisfy stringent real-time constraints. However, the controllers are susceptible to delay and crash faults, and the communication network might drop, delay or reorder messages. This degrades the quality of control of the physical process, failure of which can result in damage to life or property. Existing reliability solutions are either not well-suited for real-time CPSs or impose serious restrictions on the controllers. In this thesis, we design, implement and evaluate reliability mechanisms for real-time CPS controllers that require minimal modifications to the controller itself. We begin by abstracting the execution of a CPS using events in the CPS, and the two inherent relations among those events, namely network and computation relations. We use these relations to introduce the intentionality relation that uses these events to capture the state of the physical process. Based on the intentionality relation, we define three correctness properties namely, state safety, optimal selection and consistency, that together provide linearizability (one-copy equivalence) for CPS controllers. We propose intentionality clocks and Quarts, and prove that they provide linearizability. To provide consistency, Quarts ensures agreement among controller replicas, which is typically achieved using consensus. Consensus can add an unbounded-latency overhead. Quarts leverages the properties specific to CPSs to perform agreement using pre-computed priorities among sets of received measurements, resulting in a bounded-latency overhead with high availability. Using simulation, we show that availability of Quarts, with two replicas, is more than an order of magnitude higher than consensus. We also propose Axo, a fault-tolerance protocol that uses active replication to detect and recover faulty replicas, and provide timeliness that requires delayed setpoints be masked from the PAs. We study the effect of delay faults and the impact of fault-tolerance with Axo, by deploying Axo in two real-world CPSs. Then, we realize that the proposed reliability mechanisms also apply to unconventional CPSs such as software defined networking (SDN), where the controlled process is the routing fabric of the network. We show that, in SDN, violating consistency can cause implementation of incorrect routing policies. Thus, we use Quarts and intentionality clocks, to design and implement QCL, a coordination layer for SDN controllers that guarantees control-plane consistency. QCL also drastically reduces the response time of SDN controllers when compared to consensus-based techniques. In the last part of the thesis, we address the problem of reliable communication between the software agents, in a wide-area network that can drop, delay or reorder messages. For this, we propose iPRP, an IP-friendly parallel redundancy protocol for 0 ms repair of packet losses. iPRP requires fail-independent paths for high-reliability. So, we study the fail-independence of Wi-Fi links using real-life measurements, as a first step towards using Wi-Fi for real-time communication in CPSs.

EPFL2018