Supercharger

In an internal combustion engine, a supercharger compresses the intake gas, forcing more air into the engine in order to produce more power for a given displacement. The current categorisation is that a supercharger is a form of forced induction that is mechanically powered (usually by a belt from the engine's crankshaft), as opposed to a turbocharger, which is powered by the kinetic energy of the exhaust gases. However, up until the mid-20th century, a turbocharger was called a "turbosupercharger" and was considered a type of supercharger. The first supercharged engine was built in 1878, with usage in aircraft engines beginning in the 1910s and usage in car engines beginning in the 1920s. In piston engines used by aircraft, supercharging was often used to compensate for the lower air density at high altitudes. Supercharging is less commonly used in the 21st century, as manufacturers have shifted to turbochargers to reduce fuel consumption and increase power outputs. There are two main families of superchargers defined according to the method of gas transfer: positive displacement and dynamic superchargers. Positive displacement superchargers deliver an almost constant level of boost pressure increase at all engine speeds (RPM), while dynamic superchargers cause the boost pressure to rise exponentially with RPM (above a certain RPM threshold). Another family of supercharger, albeit rarely used, is the pressure wave supercharger. Roots blowers (a positive displacement design) tend to be only 40–50% efficient at high boost levels, compared with 70-85% for dynamic superchargers. Lysholm-style blowers (a rotary-screw design) can be nearly as efficient as dynamic superchargers over a narrow range of load/speed/boost, for which the system must be specifically designed. Positive displacement pumps deliver a nearly fixed volume of air per revolution of the compressor (except for leakage, which typically has a reduced effect at higher engine speeds). The most common type of positive-displacement superchargers is the Roots-type supercharger.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (7)

Related concepts (16)

Related courses (1)

Related lectures (2)

ME-551: Engines and fuel cells

The students describe and explain the thermodynamic and operating principles of internal combustion engines and all fuel cell types, identify the determining physical parameters for the operating regi

Internal combustion engine

An internal combustion engine (ICE or IC engine) is a heat engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combustion engine, the expansion of the high-temperature and high-pressure gases produced by combustion applies direct force to some component of the engine. The force is typically applied to pistons (piston engine), turbine blades (gas turbine), a rotor (Wankel engine), or a nozzle (jet engine).

Centrifugal compressor

Centrifugal compressors, sometimes called impeller compressors or radial compressors, are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. They achieve pressure rise by adding energy to the continuous flow of fluid through the rotor/impeller. The equation in the next section shows this specific energy input. A substantial portion of this energy is kinetic which is converted to increased potential energy/static pressure by slowing the flow through a diffuser.

Turbocharger

In an internal combustion engine, a turbocharger (also known as a turbo or a turbosupercharger) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake air, forcing more air into the engine in order to produce more power for a given displacement. The current categorisation is that a turbocharger is powered by the kinetic energy of the exhaust gases, whereas a supercharger is mechanically powered (usually by a belt from the engine's crankshaft).

Unit Operations in Process Engineering CH-334: Opération unitaire et technologie des procédés

Explores theoretical notions and technologies in process engineering unit operations, covering equipment selection, compressors, pumps, and efficiency factors.

Unit Operations: Introduction and Filtration CH-334: Opération unitaire et technologie des procédés

Covers the basics of unit operations, challenges, and filtration techniques in chemical engineering.

High temperature heat pump using HFO and HCFO refrigerants – system design and experimental results

Jürg Alexander Schiffmann

High temperature heat pumps (HTHP) with heat sink temperatures of 100 to 160 °C will increasingly become commercialized in the coming years, especially for industrial drying, sterilization and evaporation processes. In particular, the HFO R1336mzz(Z) and t ...

2019

Interaction of a pulsating vortex rope with the local velocity field in a Francis turbine draft tube

François Avellan, Arthur Tristan Favrel, Christian Landry, Andres Müller, Matthieu Dreyer, Steven Roth, Alberto Bullani

Acoustic resonances in Francis turbines often define undesirable limitations to their operating ranges at high load. The knowledge of the mechanisms governing the onset and the sustenance of these instabilities in the swirling flow leaving the runner is es ...

IOP science2013

In-Spray Supercharging of Peptides and Proteins in Electrospray Ionization Mass Spectrometry

Hubert Girault, Yury Tsybin, Luca Fornelli, Yu Lu, Sasa Miladinovic, Krzysztof Marek Piech

Enhanced charging, or supercharging, of analytes in electrospray ionization mass spectrometry (ESI MS) facilitates high resolution MS by reducing an ion mass-to-charge (m/z) ratio, increasing tandem mass spectrometry (MS/MS) efficiency. ESI MS superchargin ...

2012