Concept

Kaplan turbine

Related publications (194)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Investigation of the Time Resolution Set Up Used to Compute the Full Load Vortex Rope in a Francis Turbine

François Avellan, Cécile Münch-Alligné, Arthur Tristan Favrel, Andres Müller

The flow in a Francis turbine at full load is characterised by the development of an axial vortex rope in the draft tube. The vortex rope often promotes cavitation if the turbine is operated at a sufficiently low Thoma number. Furthermore, the vortex rope ...

2021

A new Euler-Lagrangian cavitation model for tip-vortex cavitation with the effect of non-condensable gas

Mohamed Farhat, Huaiyu Cheng

Numerical simulation of tip vortex cavitation (TVC) remains a challenging task in a variety of applica-tions, such as axial turbines and pumps as well as marine propellers. Although it is well known that TVC is highly sensitive to gas content, be it dissol ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Transposition of the mechanical behavior from model to prototype of Francis turbines

François Avellan, Joao Gomes Pereira Junior, Eduard Egusquiza

Hydropower is nowadays essential for balancing the electrical grid providing flexibility and fast response. The role of hydraulic turbines has changed from working at their Best Efficiency Point (BEP) to work in the whole operating range when demanded. Fra ...

2020

Open-Source Implementation and Validation of a 3D Inverse Design Method for Francis Turbine Runners

François Avellan, Sebastián Camilo Leguizamón Sarmiento

The hydraulic design of Francis turbines and pump-turbines is an expensive project-specific engineering effort that typically involves a direct iterative exploration of the design space. An inverse design method for turbomachinery has been previously intro ...

2020

, , , ,

At part load conditions, Francis turbines are subject to the emergence of a hydrodynamic instability in their draft tube, referred to as precessing vortex rope. It induces pressure pulsations in the water passages at the precession frequency of the vortex, ...

2020

Hydroelectric units can be operated in synchronous condenser mode to provide reactive power to the electrical power system (EPS) for voltage regulation. In this operating mode, the hydraulic turbine consumes active power and in case of hydroelectric units ...

2020

Experimental and Numerical Investigation of a Small-Scale Steam Turbine

Diya Achi

This paper focuses on a small-scale radial steam turbine which is part of a fan-turbine unit (FTU) realizing the anode off-gas recirculation of a Solid Oxide Fuel Cell (SOFC). Due to the small size of the turbine (15mm diameter), it is not possible to dete ...

2020

, ,

This paper demonstrates the feasibility and huge potential of applying distributed fiber optic sensing technologies to strain monitoring and failure predictions in hydraulic machinery, validated by a good match between experimental results and theoretical ...

Optical Society of America, 20202020

Wind turbines are often sited on different topographical features. In the current work, we performed wind-tunnel measurements of the wake behind a single wind turbine sited on two escarpments differing in the windward side shape using tomographic particle- ...

IOP Publishing2020

Variability of the rotor aspect ratio is one of the inherent characteristics of vertical-axis wind turbines (VAWTs) which differentiates them especially from the more conventional horizontal-axis wind turbines. In this study, we intend to investigate the e ...

CAMBRIDGE UNIV PRESS2020