Quattro (four-wheel-drive system)

Quattro (meaning four in Italian and stylized in lower case) is the trademark used by the automotive brand Audi to indicate that all-wheel drive (AWD) technologies or systems are used on specific models of its automobiles. The word "quattro" is a registered trademark of Audi AG, a subsidiary of the German automotive concern, Volkswagen Group. Quattro was first introduced in 1980 on the permanent four-wheel drive Audi Quattro model, often referred to as the Ur-Quattro (meaning "original" or "first"). The term quattro has since been applied to all subsequent Audi AWD models. Due to the nomenclature rights derived from the trademark, the word quattro is now always spelled with a lower case "q" by the manufacturer, in honour of its former namesake. Other companies in the Volkswagen Group have used different trademarks for their 4WD vehicles. While Audi has always used the term "quattro", Volkswagen-branded cars initially used "syncro", but more recently, VW uses "4motion". Škoda simply uses the nomenclature "4x4" after the model name, whereas SEAT uses merely "4" ("4Drive" more recently). None of the above trademarks or nomenclatures defines the operation or type of 4WD system, as detailed below. Volkswagen Group has been developing four-wheel drive (4WD) systems almost since its inception during the Second World War. The Volkswagen Kübelwagen, Volkswagen Schwimmwagen, and Volkswagen Kommandeurswagen were all military vehicles which required all four road wheels to be "driven", the latter being a 4WD Volkswagen Beetle. Their military and four-wheel drive experiences later aided them in designing the Volkswagen Iltis for the German military (Bundeswehr) in the 1970s. The Iltis utilized an early form of 4WD, which would later become synonymous with "quattro". In that original quattro system, later found in road-going passenger cars, the engine and transmission are situated in a longitudinal position. Torque is sent through the transmission to a mechanical centre differential (commonly abbreviated to "diff") which apportions (distributes) the torque between front and rear driven axles.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (20)

Related people (4)

Related units (3)

Related concepts (5)

Related courses (1)

Related lectures (20)

PHYS-101(g): General physics : mechanics

Le but du cours de physique générale est de donner à l'étudiant les notions de base nécessaires à la compréhension des phénomènes physiques. L'objectif est atteint lorsque l'étudiant est capable de pr

Audi 80

The Audi 80 is a compact executive car produced by the Audi subdivision of the Volkswagen Group across four generations from 1966 to 1996. It shared its platform with the Volkswagen Passat from 1973 to 1986 and was available as a saloon, and station wagon — the latter marketed by Audi as the Avant. The coupé and convertible models were not badged as members of the range but used a derivative of the same platforms. In North America and Australia, the 80 was marketed as the Audi Fox for model years 1973–79, and as the Audi 4000 for model years 1980–87 in the US.

Audi A8

The Audi A8 is a full-size luxury sedan manufactured and marketed by the German automaker Audi since 1994. Succeeding the Audi V8, and now in its fourth generation, the A8 has been offered with both front- or permanent all-wheel drive—and in short- and long-wheelbase variants. The first two generations employed the Volkswagen Group D platform, with the current generation deriving from the MLB platform. After the original model's 1994 release, Audi released the second generation in late 2002, the third in late 2009, and the fourth and current iteration in 2017.

Four-wheel drive

Four-wheel drive, also called 4×4 ("four by four") or 4WD, refers to a two-axled vehicle drivetrain capable of providing torque to all of its wheels simultaneously. It may be full-time or on-demand, and is typically linked via a transfer case providing an additional output drive shaft and, in many instances, additional gear ranges. A four-wheel drive vehicle with torque supplied to both axles is described as "all-wheel drive" (AWD).

Estimation of transverse spin penetration length using second-harmonic measurement: Proposal of an experimental method

Jean-Philippe Ansermet

A theoretical description of spin current injection from a nonmagnetic layer into a magnetic one is presented, with the main emphasis on the description and determination of the penetration depth of spin current component transverse to the magnetization. T ...

Amer Physical Soc2016

, ,

Tractor traction tyres interact with soil by a system of normal and tangential stresses along the soil-tyre contact surface. In this interaction both soil and tyre deform according to their own stress-strain relationships. Soil deformation results in the f ...

2013

, ,

This paper presents an integrated Hall sensor microsystem with continuous gain calibration and a current-mode back-end. The integrated system includes a Hall sensor with internal biasing, a fully differential front-end, a preamplifier chain, a voltage-to-c ...

IEEE2012

In-wheel Integration: EPFLRT ME-314: Concurrent engineering project

Explores the integration of dedicated motors in each wheel for enhanced car performance.

Untitled

Permanent Magnet Synchronous Motor EE-382: Electrical machines (for ME)

Explores the Permanent Magnet Synchronous Motor, focusing on power balance, torque characteristics, and an example with a BMW 130i.