Publications related to Laminated glass

Post-tensioned structural glass beams, experimental investigations

Jean-Paul Lebet, Pieter Christian Louter, Thibaut Jordan, Arno Pérez

In this study the structural response of post-tensioned structural glass beams is investigated. This is done through four-point bending tests on two series of post-tensioned glass beam specimens. The beams consist of three layers of annealed float glass an ...

Taylor & Francis Group2013

Edge-strengthening of structural glass with protective coatings

Jean-Paul Lebet, Pieter Christian Louter, Maria Lindqvist

In modern buildings, glass is increasingly used as a load-carrying material in structural components, such as glass beams. For glass beams especially the edge strength of glass is important. However, the strength of glass is not a material constant but dep ...

Trans Tech Publications Ltd2012

Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size

Jean-Paul Lebet, Pieter Christian Louter

This paper investigates the effects of glass type (annealed, heat-strengthened and fully tempered), reinforcement percentage (hollow section and full section) and beam size (1.5 and 3.2 m) on the structural response of SG-laminated reinforced glass beams. ...

Elsevier2012

Accelerating Thermal Simulations of 3D ICs with Liquid Cooling using Neural Networks

David Atienza Alonso, Arvind Raj Mahankali Sridhar, Martino Ruggiero, Alessandro Vincenzi

Vertical integration is a promising solution to further increase the performance of future ICs, but such 3D ICs present complex thermal issues that cannot be solved by conventional cooling techniques. Interlayer liquid cooling has been proposed to extract ...

ACM2012

Novel Laminated Connections

Manuel Santarsiero

As an alternative to standard adhesive connections, the PhD research project ‘Novel Laminated Connections for Structural Glass Applications’, which recently started at the ICOM-EPFL, focuses on the use of polymer foil/interlayer materials to laminate (meta ...

University Press2012

Optically transparent glass micro-actuator fabricated by femtosecond laser exposure and chemical etching

Yves Bellouard

Femtosecond laser manufacturing combined with chemical etching has recently emerged as a flexible platform for fabricating three-dimensional devices and integrated optical elements in glass substrates. Here, we demonstrate an optically transparent micro-ac ...

American Institute of Physics2012

On the size and shape of initial out-of-plane curvatures in structural glass components

Danijel Mocibob, Andreas Luible

For many structural glass components, buckling is known to be a major design issue, which is influenced significantly by several parameters. The latter include boundary conditions, slenderness and geometrical imperfections, in particular initial curvatures ...

Elsevier2011

Edge-Strengthening of Structural Glass with Protective Coatings

Jean-Paul Lebet, Pieter Christian Louter, Maria Lindqvist

Trans Tech Publications Ltd2011

Evaluation of Thin Film Indium Bonding at Wafer Level

Nico de Rooij, Danick Briand, Yves Pétremand, Rahel Strässle

needed. By an optimized patterning of the evaporated indium film and the lid, surface hermetic bonding on wafer level is reached without exceeding 140 °C in any step of the procedure. Different designs of the indium metallization and lid were tested to imp ...

Elsevier Science, Reg Sales Off, Customer Support Dept, 655 Ave Of The Americas, New York, Ny 10010 Usa2011

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Laminated glass

Post-tensioned structural glass beams, experimental investigations

Edge-strengthening of structural glass with protective coatings

Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size

Accelerating Thermal Simulations of 3D ICs with Liquid Cooling using Neural Networks

Novel Laminated Connections

Thermal and Visual Operational Characteristics of Multi-Microchannel Evaporators using Refrigerants

Optically transparent glass micro-actuator fabricated by femtosecond laser exposure and chemical etching

On the size and shape of initial out-of-plane curvatures in structural glass components

Edge-Strengthening of Structural Glass with Protective Coatings

Evaluation of Thin Film Indium Bonding at Wafer Level

Graph Chatbot

Chat with Graph Search

On the size and shape of initial out-of-plane curvatures in structural glass components

Edge-strengthening of structural glass with protective coatings

Thermal and Visual Operational Characteristics of Multi-Microchannel Evaporators using Refrigerants

Post-tensioned structural glass beams, experimental investigations

Optically transparent glass micro-actuator fabricated by femtosecond laser exposure and chemical etching

Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size

Evaluation of Thin Film Indium Bonding at Wafer Level

Accelerating Thermal Simulations of 3D ICs with Liquid Cooling using Neural Networks

Novel Laminated Connections

Edge-Strengthening of Structural Glass with Protective Coatings