Concept
Planned economy
Related people (20)
Karl Aberer
Karl Aberer received his PhD in mathematics in 1991 from the ETH Zürich. From 1991 to 1992 he was postdoctoral fellow at the International Computer Science Institute (ICSI) at the University of California, Berkeley. In 1992, he joined the Integrated Publication and Information Systems institute (IPSI) of GMD in Germany, where he was leading the research division Open Adaptive Information Management Systems. In 2000 he joined EPFL as full professor. Since 2005 he is the director of the Swiss National Research Center for Mobile Information and Communication Systems (
NCCR-MICS, www.mics.ch
). He is member of the editorial boards of VLDB Journal, ACM Transaction on Autonomous and Adaptive Systems and World Wide Web Journal. He has been consulting for the Swiss government in research and science policy as a member of the Swiss Research and Technology Council (
SWTR
) from 2003 - 2011.
Dominique Foray
1 - Current occupations and activities I am Full Professor at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and hold the Chair of Economics and Management of Innovation (CEMI). I am a member of the Swiss Council for Science (SWR); chairman of the Advisory Board of the Swiss Economic Research Institute (KOF); and a foreign member of the Center of Capitalism and Society (Columbia University, New York). From 2007 to 2015, I served as a member of the Swiss National Research Council (Division IV - Large Scale Programs) From 2013 to 2016, I was a member of the Expert Commission for Research and Innovation of Germany (E-FI) and a member of the Expert Group for the National Report on Research and Innovation (SBFI, Switzerland). From 2008 to 2011, I served as chairman of the expert group Knowledge for Growth; a group of prominent economists created to advise Commissioner J. Potocnik (European Commission, DG research). This is during this service as member of this Group that I developed the concept of smart specialisation (together with P.A.David and B.Hall) that is now a key policy mechanism of the EU (cohesion policy). My expertise includes the economics of innovation and knowledge and the economic policy implications of the new knowledge-based economy. I have presented many opening speeches and key note address in academic and policy conferences on these topics. I have written numerous academic papers as well as two books and have edited several books and special issues in these fields. Among these books,I like to highlight : Technology and the Wealth of Nations (Pinter, 1992) ed.with C.Freeman; Unemployment and Growth in the Knowledge-based Economy (OECD, 1996), ed. with B.A.Lundvall; Knowledge economies and societies (a special issue of the International Social Science Journal, Basil Blackwell, 2002, with editions in French, Spanish, Chinese, Arabs, Russian); The Economics of knowledge (MIT press, 2004, paperback in 2006) with editions in France, Italy, Korea, China, Greece, Syria and Algeria The New Economics of Technology Policy(Edward Elgar)2009, ed.; . Smart specialisation : opportunities and challenges for regional innovation policy(Routledge, 2015) Since 2017, I regularly contribute to the Swiss Science Council blog: https://blog.wissenschaftsrat.ch/ 2 Education, previous appointments and academic positions - I received my Ph.D. in economics in 1984 and my "habilitation à diriger des recherches" in 1992 from the University Lumière of Lyon. - In 1985, I joined the Centre National de la Recherche Scientifique (CNRS) as a Research Fellow in economics. - In 1990, I joined the Ecole Centrale de Paris as professor of economics, and taught in the program ingénieur économiste. - In 1993, I was nominated as Research Director at CNRS and joined the Institut pour le Management de la Recherche et de l'Innovation (IMRI) of the University of Paris-Dauphine. - In 2001-2004, I worked as a Principal Analyst at the Center for Education, Research and Innovation of OECD (Paris). - I joined the EPFL as Professeur Ordinaire in 2004. 3 - Honours and awards Best young economist award - City of Lyon (France)1986 Outstanding research in 1995 (médaille du CNRS)(France) Futuris award in 2012 for his work on smart specialisation Best paper award, EJIM, 2014 Doctor Honoris Causa, University of Cluj Napoca, 2017 I was also elected as Research Fellow at ICER (International Center for Economic Research) in Turin, at the Wissenschaftskolleg in Berlin and at IIASA in Laxenburg; and I was Invited Professor at the Universities of Santiago de Compostela, Torino and Padova. 4 - Consulting activities I have done consulting work for the UNESCO, the OECD, WIPO, UNCTAD, UN/ECE, the European Commission, the Swiss Government and other public organisations. I am currently strongly involved into the "smart specialisation" debate in Europe, giving talks and providing advices in many countries and regions in Europe.
Edgard Gnansounou
- 1983 Ing. Civil EPFL
- 1991 Dr ès Sciences techniques, EPFL
- Directeur du Laboratoire de systèmes énergétiques (LASEN) de 2003 à 2008
- Dès 2008, Responsable du groupe de Recherche en Bioénergie et Planification énergétique
- Co-fondateur du bureau d'étude ENERS Energy Concept
- Président de la Fondation SUD (Solidarités Universitaires pour le Développement)
François Maréchal
Ph D. in engineering Chemical process engineer
Researcher and lecturer in the field of computer aided process and energy systems engineering.
Lecturer in the mechanical engineering, electrical engineering and environmental sciences engineering in EPFL.
I'm responsible for the Minor in Energy of EPFL and I'm involved in 3 projects of the Competence Center in Energy and Mobility (2nd generation biofuel, Wood SOFC, and gas turbine development with CO2 mitigation) in which i'm contributing to the energy conversion system design and optimisation.
Short summary of my scientific carrer
After a graduation in chemical engineering from the University of Liège, I have obtained a Ph. D. from the University of Liège in the LASSC laboratory of Prof. Kalitventzeff (former president of the European working party on computer aided process engineering). This laboratory was one of the pioneering laboratory in the field of Computer Aided Process Engineering.
In the group of Professor Kalitventzeff, I have worked on the development and the applications of data reconciliation, process modelling and optimisation techniques in the chemical process industry, my experience ranges from nuclear power stations to chemical plants. In the LASSC, I have been responsible from the developments in the field of rational use of energy in the industry. My first research topic has been the methodological development of process integration techniques, combining the use of pinch based methods and of mathematical programming: e.g. for the design of multiperiod heat exchanger networks or Mixed integer non linear programming techniques for the optimal management of utility systems. Fronted with applications in the industry, my work then mainly concentrated on the optimal integration of utility systems considering not only the energy requirements but the cost of the energy requirements and the energy conversion systems. I developed methods for analysing and integrating the utility system, the steam networks, combustion (including waste fuel), gas turbines or other advanced energy conversion systems (cogeneration, refrigeration and heat). The techniques applied uses operation research tools like mixed integer linear programming and exergy analysis. In order to evaluate the results of the utility integration, a new graphical method for representing the integration of the utility systems has been developed. By the use of MILP techniques, the method developed for the utility integration has been extended to handled site scale problems, to incorporate environmental constraints and reduce the water usage. This method (the Effect Modelling and Optimisation method) has been successfully applied to the chemical plants industry, the pulp and paper industry and the power plant. Instead of focusing on academic problems, I mainly developed my research based on industrial applications that lead to valuable and applicable patented results. Recently the methods developed have been extended to realise the thermoeconomic optimisation of integrated systems like fuel cells. My present R&D work concerns the application of multi-objective optimisation strategies in the design of processes and integrated energy conversion systems.
Since 2001, Im working in the Industrial Energy Systems Laboratory (LENI) of Ecole Polytechnique fédérale de Lausanne (EPFL) where Im leading the R&D activities in the field of Computer Aided Analysis and Design of Industrial Energy Systems with a major focus on sustainable energy conversion system development using thermo-economic optimisation methodologies. A part from the application and the development of process integration techniques, that remains my major field of expertise, the applications concern :
Rational use of water and energy in Industrial processes and industrial production sites : projects with NESTLE, EDF, VEOLIA and Borregaard (pulp and paper).Energy conversion and process design : biofuels from waste biomass (with GASNAT, EGO and PSI), water dessalination and waste water treatment plant (VEOLIA), power plant design (ALSTOM), Energy conversion from geothermal sources (BFE). Integrated energy systems in urban areas : together with SCANE and SIG (GE) and IEA annexe 42 for micro-cogeneration systems.
I as well contributed to the definition of the 2000 Watt society and to studies concerning the emergence of green technologies on the market in the frame of the Alliance for Global Sustainability.
Maryam Kamgarpour
Maryam Kamgarpour holds a Doctor of Philosophy in Engineering from the University of California, Berkeley and a Bachelor of Applied Science from University of Waterloo, Canada. Her research is on safe decision-making and control under uncertainty, game theory and mechanism design, mixed integer and stochastic optimization and control. Her theoretical research is motivated by control challenges arising in intelligent transportation networks, robotics, power grid systems and healthcare. She is the recipient of NASA High Potential Individual Award, NASA Excellence in Publication Award, and the European Union (ERC) Starting Grant.
Paul Xirouchakis
Paul Xirouchakis obtained his diplôme in mechanical and electrical engineering at the National Technical University of Athens, Greece in 1971. He continued his education at the Ecole Nationale Superieure de Techniques Avancées, in Paris, France where he obtained his diplôme dIngénieur de lE.N.S.T.A. et dIngénieur civil du Génie Maritime in 1973. He obtained his PhD degree in Structural Mechanics from the Massachusetts Institute of Technology in 1978. He was appointed thereafter assistant and later associate professor at Massachusetts Institute of Technology (1978-1985). Subsequently he was nominated associate professor at the National Technical University in Athens (1985-1987). After about eight years working in the industry with JJMA, Arlington, Virginia (in parallel he also obtained a PhD degree in Information Technology, in 1992 from George Mason University) he was nominated at EPFL professor of computer-aided design and manufacturing since July 1995. At EPFL he teaches design for X at the bachelors level, computer-aided manufacturing and multi-body dynamics simulation at the masters level and manufacturing information systems at the doctoral level. His research covers the development of methods and computer tools for the (sustainable) product design and manufacturing. Current research projects deal with the development of method and tools for resource efficient part manufacturing, chatter-free part programming, development of a virtual multi-body dynamics machine tool environment and composites drilling programming.
Alcherio Martinoli
I received my Diploma in Electrical Engineering from the Swiss Federal Institute of Technology in Zurich (ETHZ), and a Ph.D. in Computer Science from the Swiss Federal Institute of Technology in Lausanne (EPFL). I am currently an Associate Professor at the School of Architecture, Civil, and Environmental Engineering and the head of the Distributed Intelligent Systems and Algorithms Laboratory. Before joining EPFL I carried out research activities at the Institute of Biomedical Engineering of the ETHZ, at the Institute of Industrial Automation of the Spanish Research Council in Madrid, Spain, and at the California Institute of Technology, Pasadena, U.S.A. Additional information can be found on my full CV.