Roland Logé is an associate professor at EPFL, with a primary affiliation to the Materials Institute, and a secondary affiliation to the Microengineering Institute.
After graduating in 1994 at UCL (Belgium) in Materials Engineering, he earned a Master of Science in Mechanics in 1995, at UCSB Santa Barbara (USA). He received his PhD at Mines Paristech-CEMEF (France) in 1999, where he specialized in metal forming and associated microstructure evolutions. After a postdoc at Cornell University (USA) between 1999 and 2001, he entered CNRS in France.
In 2008, he was awarded the ALCAN prize from the French Academy of Sciences, together with Yvan Chastel.
In 2009 he became head of the Metallurgy-Structure-Rheology research group at CEMEF.
In 2011, he launched a “Groupement de Recherche” (GDR), funded by CNRS, networking most of the researchers in France involved in recrystallization and grain growth.
In 2013, he became Research Director at CNRS.
In March 2014 he joined EPFL as the head of the Laboratory of Thermomechanical Metallurgy.
Nicolas Grandjean received a PhD degree in physics from the University ofNice Sophia Antipolis in 1994 and shortly thereafter joined the French National Center for Scientific Research (CNRS) as a permanent staff member. In 2004, he was appointed tenure-track assistant professor at the École polytechnique fédérale de Lausanne (EPFL) where he created the Laboratory for advanced semiconductors for photonics and electronics. He was promoted to full professor in 2009. He was the director of the Institute of Condensed Matter Physics from 2012 to 2016 and then moved to the University of California at Santa Barbara where he spent 6 months as a visiting professor. Since 2018, he is the head of the School of Physics at the EPFL. He was awarded the Sandoz Family Foundation Grant for Academic Promotion, received the “Nakamura Lecturer” Award in 2010, the "Quantum Devices Award” at the 2017 Compound Semiconductor Week, and “2016 best teacher” award from the EPFL Physics School. His research interests are focused on the physics of nanostructures and III-V nitride semiconductor quantum photonics.
1992-1995 Engineering School. Ecole des Mines de Nancy.
1994-1995 Master's degree in Materials Science (rank = 1st)
1995-1996 Military Service
1996-2000 PhD at EPFL-CIME. Precipitation in 6xxx alloys and composites.
2000-2014 Researcher, Engineer and Group leader on materials for new energies at CEA-Grenoble, France.
2012 Habilitation to supervise researches (HDR)
2014-now Senior Scientist at EPFL-LMTM
Creator of the computer programs GenOVa and ARPGE (in Python).
I currently work on crystallographic models of martensitic transformations and deformation twinning.
Andreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
After a PhD in solid state physics (1978) at the Ecole Polytechnique Fédérale de Lausanne (EPFL) and a post-doc at Oak Ridge National Laboratory, Michel Rappaz joined the Institute of Materials of EPFL in 1981. After two years in an engineering company, he came back to EPFL in 1984 where he was nominated Adjunct Professor in 1990 and Full Professor in 2003. He retired from EPFL in 2015 and is now Emeritus Professor and independent consultant for several industries and research centres.
His main interests are in phase transformations and solidification, in particular the coupling of macroscopic aspects of heat and mass transfer with microscopic aspects of microstructure and defect formation. Among his diverse achievements, one can mention in particular the development of cellular automata for grain structure predictions and of granular models for hot tearing formation in castings, the coupling of Finite Element method with microscopic models of nucleation and growth, the application of the phase field method to the understanding of various microstructures, the discovery of quasicrystal mediated-nucleation in alloys, and many other studies both fundamental at the microstructure-defect level and more applied at the level of processes.
Some of the software developments have been commercialized by a spin-off company founded by his group in 1991 (Calcom SA), now part of the French company ESI. Michel Rappaz initiated in 1992 an annual postgraduate course on solidification which has been attended by more than 900 participants from all over the world. He is presently collaborating closely with another spin-off company started from his group, Novamet SàrL.
Michel Rappaz has received several awards, in particular the Mathewson co-author award (1994) and author award (1997) of the American Mineral, Metals and Materials Society (TMS), the Koerber foundation award jointly with Profs Y. Bréchet and M. Asbby (1996), the Sainte-Claire Deville Medal (1996) and the Grand Medal (2011) from the French Materials Society, the Bruce Chalmers Award of TMS (2002), the Mc Donald Memorial Lecture award of Canada (2005), the FEMS European Materials Gold Medal (2013) and the Brimacombe Prize of TMS (2015). He is a highly-cited author of ISI, a fellow of ASM, IOP and TMS, and has co-authored more than 200 publications and two books.
Biography
Architect and civil engineer, Prof. Dr. Yves Weinand is one of the most recognised researchers in the field of contemporary wood construction. Founder of the Bureau d'Etude Weinand, he has, since 1996, designed and worked on many emblematic wooden buildings, such as the Saint Loup Chapel, the new Vaudois Parliament or, more recently, the Timber Pavilion of Vidy in Lausanne. His fundamental research questions the technical and static possibilities of wooden materials. The interdisciplinary exploration carried out at the EPFL's Laboratory for Timber Constructions (Ibois), of which he is director, concerns wood in all its aspects, from round wood to manufactured wood. The recent research carried out at Ibois on free structures with wood-wood connections (without screw nor glue) has been the subject of several technological transfers, and stands as tangible proof of new possibilities for wood construction. Yves Weinand is currently working on a large-scale project for a hall for the head office of a joinery in Luxembourg, consisting of a succession of arches with spans of 22.5 to 53.7m, entirely assembled in wood ). Through new innovative approaches, the ambition of his research is to develop a new generation of renewable and ecological wooden construction.He is regularly invited to present his work at international symposia on timber construction.
Fields of expertise
Architectural designTimber structuresDigital FabricationRobotic AssemblyStructural Wood mechanicsIntegrally Attached Timber plate structures
Distinctions
2012 Grand Prix d'Architecture de Wallonie
2014 Best Paper Award, Advances in Architectural Geometry conference. (IBOIS team)
2017 Medal for Research and Technique by the Academy of Architecture. 2018 Mention Régionale, Prix Lignum for the Timber Pavilion of Vidy-Lausanne
2019 "Disctinction Bois 2019" for the Nouveau Parlement vaudois.2019 Grand Prix d'Architecture de Wallonie____________________________________________________________________________
Selected publications
Les Cahiers de l'Ibois/ Ibois Notebooks 1, F. Fromonot, S. Berthier, Y. Rocher, publication directors: Y. Weinand et C. Catsaros, 2020 EPFL Press Le Pavillon en bois du Théâtre de Vidy, under the direction of Yves Weinand; V. Baudriller, J. Gamerro, M. Jaccard, C. Robeller; 2017, PPURAdvanced Timber Structures - Architectural Designs and Digital Dimensioning, Y. Weinand, 2017, Birkhaüser, publié en trois langues (french : Structures Innovantes en Bois (2016); german : Neue Holztragwerke - Architektonische Entwürfe und digitale Bemessung (2017)Grubenmann Project / Projekt Grubenmann, Y. Weinand, 2016, Stiftung Grubenmann-SammlungTimber Project: Nouvelles formes d’architectures en bois, Y. Weinand, 2010, PPURArchitexto, Y. Weinand and D. Darcis, 2009, Editions Fourre-Tout, LiègeLe bois soudé, B. Stamm and Y. Weinand, 2004, Architecture Bois & DépendanceNew Modeling - projeter ensemble, Y. Weinand, 2003, PPUR