Chain transfer | EPFL Graph Search

Chain transfer is a polymerization reaction by which the activity of a growing polymer chain is transferred to another molecule. :P• + XR' → PX + R'• Chain transfer reactions reduce the average molecular weight of the final polymer. Chain transfer can be either introduced deliberately into a polymerization (by use of a chain transfer agent) or it may be an unavoidable side-reaction with various components of the polymerization. Chain transfer reactions occur in most forms of addition polymerization including radical polymerization, ring-opening polymerization, coordination polymerization, and cationic polymerization, as well as anionic polymerization. Types Chain transfer reactions are usually categorized by the nature of the molecule that reacts with the growing chain.

Transfer to chain transfer agent. Chain transfer agents have at least one weak chemical bond, which therefore facilitates the chain transfer reaction. Common chain transfer agents include thiols, esp

Dark curing kinetics of UV printing inks by real-time ATR-FTIR spectroscopy

Eric Jacques Nouzille

In UV-curable printing technology, an ink or a varnish is exposed to the UV-light source within a fraction of a second. Subsequent polymerization therefore proceeds in the dark, referred to as dark curing. Because dark curing can be critical and contributes to a large part of the overall conversion and to the final properties of the printed ink, the aim of this work was to get a better understanding of the dark curing process. Because an ink is a complex mixture of components, simpler systems representative of free radical and cationic chemistry were studied. Special attention was given to free radical polymerization with a detailed kinetic modeling. For cationic systems, the study was more application oriented. Attenuated-Total-Reflection Fourier-Transform Infrared (ATR-FTIR) spectroscopy was found to be the method of choice to follow in real-time the progress of the reaction under UV irradiation and in the dark. This technique allowed the study of curing conditions close to those encountered in industry. Dark curing of free radical was examined in systems consisting of a monomer (multifunctional acrylate) and a photoinitiator. The reactivities of different monomers were investigated and it was found that the chemistry of the spacer between the acrylate functional groups had an influence on the extent of dark curing. For example, TPGDA (tripropylene glycol diacrylate) led to higher overall conversion than HDDA (hexanediol diacrylate) although both are diacrylate monomers. Several explanations were put forward, such as the effect of dissolved oxygen, primary cyclization and initiation efficiency. The efficiency of photoinitiators (PIs) was examined and different behaviours were highlighted. For example, it was observed that DMPA (dimethoxyphenyl acetophenone) has a better quantum yield for α-cleavage compared to HCPK (1-hydroxycyclohexylphenyl ketone), whereas HCPK is more efficient in initiating the reaction, resulting in a better overall conversion in the dark. It is suggested that the two primary radicals resulting from the cleavage of the PI behave differently for DMPA and HCPK. One radical effectively initiates the reaction and the second is mainly involved in the termination process. These two different behaviours were observed under specific experimental conditions: (i) by covering the sample with a quartz plate and taking into account dissolved molecular oxygen and (ii) by curing under inert conditions with nitrogen. Photo-crosslinking polymerization reactions are strongly influenced by diffusion effects due to the formation of an infinite network. Therefore, it was proposed that a redistribution of reactivity within the system occurs, such as the diffusion of unreacted photoinitiators towards concentrations of unreacted monomers. This diffusion process has two positive effects: (i) for the same UV dose, but different intensities, a higher extent of conversion was reached with longer irradiation times under the condition investigated; (ii) multiple exposures led to a higher overall conversion than for a single exposure, for a fixed overall UV dose. Other parameters were explored, such as temperature and diffusing oxygen from air. With temperature, different trends were observed depending on the photoinitiator and the start of dark curing, either starting before the maximum rate of polymerization (Rp,max), or after Rp,max. The development of a kinetic model to describe dark curing of free radical polymerization was proposed. Existing models based on physical parameters, such as those incorporating diffusion-controlled phenomena and free-volume are relatively complex and require extensive information on the system studied. Therefore, a semi empirical approach was chosen in order to study the variation of fitting parameters when changing curing parameters, such as the photoinitiator concentration and type, the irradiation time, the UV light intensity and the temperature. The model was derived from kinetic data and it was assumed that rate coefficients are time-dependent and that termination, which was considered to be a first-order process, is propagation dependent. The kinetic equation has the form of a stretched exponential function and incorporates four fitting parameters. The model was evaluated for a large number of experimental data and very good fits were obtained with a random distribution of residuals. The exponent β was found to be sensitive to the termination process and reflected different reactivities in the dark as in the case of DMPA and HCPK. Dark curing of cationic systems continues until complete monomer conversion but at a slower rate. Thus systems with high reaction rates, both during UV irradiation and during the first seconds of the dark period, are of most importance for UV-curable printing technology. The most widely used diepoxide monomer in cationic ink formulation is 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate (DECC). In order to improve its reactivity during the first seconds of dark curing, the influence of several parameters was examined, such as the addition of an oxetane co-monomer (TMPO), the influence of relative humidity, UV dose, light intensity, temperature, and film thickness. The enhanced reactivity of DECC with TMPO was confirmed. During the cationic curing process, two reaction mechanisms compete; an activated chain end (ACE) mechanism and an activated monomer (AM) mechanism. It was observed that these two processes depend on the presence of hydroxyl containing compounds such as TMPO monomer, polyol compounds, and, most important, water. When the concentration of these components is increased the AM mechanism is enhanced, leading to higher conversion but at a slower curing rate, and a degradation of the mechanical properties. The presence of water is unavoidable and its concentration in the ink varies in presence of hydrophilic compounds, such as polyol. Furthermore, the water content increases with increasing relative humidity in air. It was shown that the reactivity of the system decreased as the percent of relative humidity increased. Moreover, although a higher overall conversion is achieved, the crosslink density of the film was severely reduced. This lower crosslink density was the result of the predominance of chain transfer reactions, leading to more pendant and short chains which were hydroxyl terminated. Moreover, the extent of conversion was thickness dependent since less water diffuses into the deeper layers occurred in thicker films.

EPFL2007

Synthetic chemistry with nitrous oxide and triazenes

Iris Roswitha Landman

Nitrous oxide (N2O) has gained much interest because of its physiological effects ("laughing gas") and its negative environmental impact ("greenhouse gas", "ozone-depleting substance"): It has a lifetime of more than 100 years in the atmosphere. Its persistent character shows how challenging it is to convert N2O into more valuable products. From a synthetic point of view, N2O has potential as diazo (N2) transfer reagent, but applications in synthetic organic chemistry are scarce. The main challenges are to capture N2O, avoid the loss of N2, and to overcome poor-selectivity and -yields. Herein, we describe two examples of the incorporation of two nitrogen atoms into the final product. Firstly, we use N2O as diazo transfer reagent in the preparation of triazolopyridines, which are valuable starting materials for heterocyclic compounds. The reactions can be performed under mild conditions and give synthetically interesting triazoles in moderate to good yields. Secondly, general methods to N1 acylated triazenes were missing previously. We developed routes to 1-acyl triazenes via acid-catalyzed hydration, or by gold- or iodine-catalyzed oxidation of 1-alkynyl triazenes. The latter compounds are prepared from N2O. The properties of the N1 acylated triazenes are distinct compared to other triazenes, displaying different physical and chemical properties. Under strong acidic conditions, 1-acyl triazenes act as acylation reagents. Finally, despite that triazene chemistry is known for more than 160 years, the preferred coordination site of acids still remained a matter of debate (N1, N2, or N3). In search of experimental evidence, we have analyzed triflic acid, B(C6F5)3, and PdCl2 adducts of triazenes by IR, NMR spectroscopy and single crystal X-ray crystallography. For all cases, we found the acid coordinating to the N1 atom of the triazene. This preference should be taken into account for future acid- and transition metal-catalyzed reactions with triazenes. Altogether, this thesis contributes to triazene chemistry and synthetic chemistry with N2O. In this way, we provide further evidence that N2O can be used as a diazo donor to get to synthetically interesting N-containing products.

EPFL2022

Peptide/protein – polymer conjugates: synthetic strategies and design concepts

Marc Gauthier, Harm-Anton Klok

This feature article provides a compilation of tools available for preparing well-defined peptide/protein–polymer conjugates, which are defined as hybrid constructs combining (i) a defined number of peptide/protein segments with uniform chain lengths and defined monomer sequences (primary structure) with (ii) a defined number of synthetic polymer chains. The first section describes methods for post-translational, or direct, introduction of chemoselective handles onto natural or synthetic peptides/proteins. Addressed topics include the residue- and/or site-specific modification of peptides/proteins at Arg, Asp, Cys, Gln, Glu, Gly, His, Lys, Met, Phe, Ser, Thr, Trp, Tyr and Val residues and methods for producing peptides/proteins containing non-canonical amino acids by peptide synthesis and protein engineering. In the second section, methods for introducing chemoselective groups onto the side-chain or chain-end of synthetic polymers produced by radical, anionic, cationic, metathesis and ring-opening polymerization are described. The final section discusses convergent and divergent strategies for covalently assembling polymers and peptides/proteins. An overview of the use of chemoselective reactions such as Heck, Sonogashira and Suzuki coupling, Diels–Alder cycloaddition, Click chemistry, Staudinger ligation, Michaels addition, reductive alkylation and oxime/hydrazone chemistry for the convergent synthesis of peptide/protein–polymer conjugates is given. Divergent approaches for preparing peptide/protein–polymer conjugates which are discussed include peptide synthesis from synthetic polymer supports, polymerization from peptide/protein macroinitiators or chain transfer agents and the polymerization of peptide side-chain monomers.