Noise, vibration, and harshness

Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

Noise, vibration, and harshness (NVH), also known as noise and vibration (N&V), is the study and modification of the noise and vibration characteristics of vehicles, particularly cars and trucks. While noise and vibration can be readily measured, harshness is a subjective quality, and is measured either via jury evaluations, or with analytical tools that can provide results reflecting human subjective impressions. The latter tools belong to the field psychoacoustics. Interior NVH deals with noise and vibration experienced by the occupants of the cabin, while exterior NVH is largely concerned with the noise radiated by the vehicle, and includes drive-by noise testing. NVH is mostly engineering, but often objective measurements fail to predict or correlate well with the subjective impression on human observers. For example, although the ear's response at moderate noise levels is approximated by A-weighting, two different noises with the same A-weighted level are not necessarily equally disturbing. The field of psychoacoustics is partly concerned with this correlation. In some cases the NVH engineer is asked to change the sound quality, by adding or subtracting particular harmonics, rather than making the vehicle quieter. Noise, Vibration and Harshness for Vehicles can be distinguished easily by quantifying the frequency.Vibration takes 0.5 to 50 Hz range, Noise takes 20 Hz to 5000 Hz range and Harshness takes the coupling of Noise and Vibration. The sources of noise in a vehicle can be classified as: Aerodynamic (e.g., wind, cooling fans of HVAC) Mechanical (e.g., engine, driveline, tire contact patch and road surface, brakes) Electrical (e.g., electromagnetically induced acoustic noise and vibration coming from electrical actuators, alternator or traction motor in electrical cars). Mainly noise is either structure borne noise or air bone noise. Many problems are generated as either vibration or noise, transmitted via a variety of paths, and then radiated acoustically into the cabin. These are classified as "structure-borne" noise.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts (7)

Related courses (10)

Related lectures (85)

EE-548: Audio engineering

This lecture is oriented towards the study of audio engineering, with a special focus on room acoustics applications. The learning outcomes will be the techniques for microphones and loudspeaker desig

EE-424: Fundamentals of analog & mixed signal VLSI design

This course provides the stepping stone to becoming an advanced A/MS IC designer. It emphasizes conceptual learning spanning from implementation to structure/architecture. It expands basic concepts (e

EE-580: Introduction to the design of space mechanisms

Space environment is different from what we can experience on Earth, requiring specific design approaches in order to achieve reliable operations. Engineers must hence face new challenges stimulating

Vibration

Vibration () is a mechanical phenomenon whereby oscillations occur about an equilibrium point. The oscillations may be periodic, such as the motion of a pendulum, or random, such as the movement of a tire on a gravel road. Vibration can be desirable: for example, the motion of a tuning fork, the reed in a woodwind instrument or harmonica, a mobile phone, or the cone of a loudspeaker. In many cases, however, vibration is undesirable, wasting energy and creating unwanted sound.

Noise, vibration, and harshness

Modal analysis

Modal analysis is the study of the dynamic properties of systems in the frequency domain. Examples would include measuring the vibration of a car's body when it is attached to a shaker, or the noise pattern in a room when excited by a loudspeaker. Modern day experimental modal analysis systems are composed of 1) sensors such as transducers (typically accelerometers, load cells), or non contact via a Laser vibrometer, or stereophotogrammetric cameras 2) data acquisition system and an analog-to-digital converter front end (to digitize analog instrumentation signals) and 3) host PC (personal computer) to view the data and analyze it.

Forces and Moments Exported: Rappels MICRO-200: Mechanism Design I

Covers forces and moments exported, dynamic phenomena, and practical examples.

Vibrational Mechanics: Stiffness Matrices ME-332: Mechanical vibrations

Covers stiffness matrices, effective masses, and problem-specific systems in vibrational mechanics.

Fram Damper Study ME-314: Concurrent engineering project

Covers the study and design of a Fram damper for limiting vibrations.