Channel access method

Summary

In telecommunications and computer networks, a channel access method or multiple access method allows more than two terminals connected to the same transmission medium to transmit over it and to share its capacity. Examples of shared physical media are wireless networks, bus networks, ring networks and point-to-point links operating in half-duplex mode. A channel access method is based on multiplexing, that allows several data streams or signals to share the same communication channel or transmission medium. In this context, multiplexing is provided by the physical layer. A channel access method may also be a part of the multiple access protocol and control mechanism, also known as medium access control (MAC). Medium access control deals with issues such as addressing, assigning multiplex channels to different users and avoiding collisions. Media access control is a sub-layer in the data link layer of the OSI model and a component of the link layer of the TCP/IP model. Fundame

Official source

https://en.wikipedia.org/wiki/Channel_access_method

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (31)

Related publications

Related people (6)

Related people

Related units (2)

Related units

Related concepts (42)

Related concepts

Related courses (5)

Related courses

Related lectures (5)

Related lectures

Performance analysis of multi-channel protocols for optical local area networks exploiting wavelength division multiplexing

Daniel Rodellar Gomez

EPFL1999

, , , ,

Inspired by the compute-and-forward scheme from Nazer and Gastpar, a novel multiple-access scheme introduced by Zhu and Gastpar makes use of nested lattice codes and sequential decoding of linear combinations of codewords to recover the individual messages. This strategy, coined compute-forward multiple access (CFMA), provably achieves points on the dominant face of the multiple-access capacity region while circumventing the need of time sharing or rate splitting. For a two-user multiple-access channel (MAC), we propose a practical procedure to design suitable codes from off-the-shelf LDPC codes and present a sequential belief propagation decoder with complexity comparable with that of point-to-point decoders. We demonstrate the potential of our strategy by comparing several numerical evaluations with theoretical limits.

2017

Delay and coding in multiple-user communications

Stéphane Musy

In multiple-user communications, the bursty nature of the packet arrival times cannot be divorced from the analysis of the transmission process. However, in traditional information theory the random arrival times are smoothed out by appropriated source coding and no consideration is made for the end-to-end delay. In this thesis, using tools from network theory, we investigate simple models that consider the end-to-end delay and/or the variability of the packet arrivals as important parameters, while staying in a information theoretic framework. First, we simplify the problem and focus on the transmission of a bursty source over a single-user channel. We introduce a new measure of channel features that enable us to incorporate the possibility to code among several packets in a scheduling problem. In this setup, we look for policies that minimize the average packet delay. Assuming that the packets are independent and sufficiently large to perform capacity achieving coding, we then consider the problem of allocating rates among a finite number of users communicating through a multiple-user channel. Following the previous work in the context of multiple-access channel, we formulate a scheduling problem in which the rate of each user is chosen from the capacity region of the multiple-user channel. Here, the goal is to find a scheduling policy that minimizes the sum of the transmitter queue lengths, such a policy is called delay optimal. In particular settings, for the additive Gaussian multiple-access channel we show the delay optimality of the Longer Queue Higher Rate policy introduced by Yeh. And, when the users communicate through a symmetric broadcast channel, we propose and show the delay optimality of a Best User Highest Possible Rate policy, among a large class of admissible policies. Finally, in the last part of this thesis, we look at the multiple-user channel coding problem from the perspective of the receivers. By measuring the transmission rates at the receivers, we are able to define variable length codes and to characterize the region of achievable rates when the receivers can decode their intended messages at different instants of time. For the two-user degraded broadcast channel and for the two-user multiple-access channel, we show that the gain in using variable length codes essentially comes from the possibility for the receivers to decode the transmitted messages in non-overlapping periods of time.

EPFL2007

Delay and coding in multiple-user communications

Stéphane Musy

EPFL2007