Publications related to Administration (law)

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Pierluigi Bruzzone, Kamil Sedlák, Nikolay Bykovskiy

Particle accelerators foresee the use of Nb3Sn in the next generation of dipole magnets. A common design strategy is to grade the coil, i.e., to optimize the quantity of superconductor in the turns with respect to the magnetic field intensity. As a consequ ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Alternative PF Coil Winding Pack Design for the EU DEMO

Pierluigi Bruzzone, Kamil Sedlák, Roberto Guarino, Mithlesh Kumar

The EUROfusion DEMO machine is at its pre-conceptual stage. The design of the magnet system for this machine is being developed in collaboration with several European research centers. The Poloidal Field (PF) coils proposed by the Swiss Plasma Center (SPC) ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

Pierluigi Bruzzone, Mithlesh Kumar, Vincenzo D'Auria

Future high-field accelerator magnets foresee the extensive use of Nb3Sn, more expensive than the Nb-Ti of LHC. For projects involving the series production of magnets, conductor grading is mandatory in order to reduce the cost. To allow grading ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Preliminary Design of DEMO PF Coils Based on EU DEMO 2018 Baseline

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The dimensioning of Winding Packs and allocation of materials in DEMO PF coils is proposed based on the requirements defined by the EUROfusion 2018 DEMO baseline. The coils are pancake-wound and use two types of forced flow cable-in-conduit conductors. The ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Pierluigi Bruzzone, Kamil Sedlák, Mithlesh Kumar

The poloidal field (PF) coils are designed based on the requirements defined by the EUROfusion 2015 DEMO baseline. The conductors are forced flow, NbTi cable-in-conduit. The design addresses the dimensioning of the winding pack, the electromagnetic field c ...

2019

Inter-Layer Joint for the TF Coils of DEMO-Design and Test Results

Pierluigi Bruzzone, Kamil Sedlák, Boris Stepanov

In summer 2015, a new reference baseline is issued for the DEMO EUROfusion tokamak. Thereafter, the toroidal field (TF) coils have been updated with the new layout of the react-and-wind conductor proposed by the Swiss Plasma Center (SPC). Each TF coil cons ...

Ieee-Inst Electrical Electronics Engineers Inc2018

Progress in the design of the superconducting magnets for the EU DEMO

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche, Elena Gaio

In the framework of the DEMOnstration fusion power plant (DEMO) design coordinated by the EUROfusion consortium, a pre-conceptual design of the superconducting magnet system has been developed. For the toroidal field coils (TFCs), three winding pack (WP) o ...

2018

Central solenoid winding pack design for DEMO

Pierluigi Bruzzone, Kamil Sedlák, Davide Uglietti, Boris Stepanov, Rainer Wesche

The present study aims to reduce the outer radius of the central solenoid (CS) with respect to its nominal size specified by EUROfusion for a maintained CS magnetic flux. A reduced outer CS radius would allow the reduction of the overall size and cost of t ...

ELSEVIER2017

Winding Pack Proposal for the TF and CS Coils of European DEMO

Pierluigi Bruzzone, Kamil Sedlák, Rainer Wesche

The design of the European DEMO, i.e., the future fusion tokamak planned after ITER, is being developed under the coordination of the EUROfusion Consortium. This paper reports the design optimization of the toroidal field (TF) winding pack and its correspo ...

2016

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Administration (law)

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Alternative PF Coil Winding Pack Design for the EU DEMO

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets

Preliminary Design of DEMO PF Coils Based on EU DEMO 2018 Baseline

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Thermal-hydraulic analysis of the upgraded EU-DEMO CS1 coil

Inter-Layer Joint for the TF Coils of DEMO-Design and Test Results

Progress in the design of the superconducting magnets for the EU DEMO

Central solenoid winding pack design for DEMO

Winding Pack Proposal for the TF and CS Coils of European DEMO

Graph Chatbot

Chat with Graph Search

Design of DEMO PF Coils Based on Cable-in-Conduit Conductor

Progress in the design of the superconducting magnets for the EU DEMO

Central solenoid winding pack design for DEMO

Winding Pack Proposal for the TF and CS Coils of European DEMO

Preliminary Design of DEMO PF Coils Based on EU DEMO 2018 Baseline

Inter-Layer Joint for the TF Coils of DEMO-Design and Test Results

Thermal-hydraulic analysis of the upgraded EU-DEMO CS1 coil

Diffusion-Bonding Between Strands and Modeling of Splices of Nb3Sn Rutherford Cables

Alternative PF Coil Winding Pack Design for the EU DEMO

Progress on Tests on Splices Between Nb3Sn Rutherford Cables for Graded High-Field Accelerator Magnets